Vitek Aperio ELK Power
Filter
- $64.35SKU: 912B6
ELK 912B6 Relay SPDT 12/24V Big terminals (6 pack)
- High Quality Cross-head Terminals
- 12 or 24 Volts D.C. Selectable Operation
- Low Current Draw
- Voltage Input LED
- Form ″C″ Dry Contacts
$64.35Low Price Guarantee - $27.00SKU: 100
ELK 100 Siren Driver High Performance
- Draws Less Current Than Most Sirens
- MilliMiser™Lowers Current Draw
- Economical - Drives Multiple Speakers
- ComboTrigger™For Single Outputs
- Pre-Wired for easy Installation
$27.00Low Price Guarantee - $72.00SKU: 120
ELK 120 Multi-Channel Recordable Voice and Siren Driver Module
- Four Channels Configurable as: Two Siren and Two Recordable Voice OR Four Recordable Voice
- Maximum record time is 8 minutes divided between the number of voice channels
- Siren Sounds: Classic Yelp Siren, Temporal Coded Horn, and Steady Industrial Horn
- Temporal Coded Horn meets ANSI standard for Audible Emergency Evacuation Signaling
- Recordings stored in non-volatile memory
$72.00Low Price Guarantee - $27.00SKU: ELK-960
ELK 960 Delay Timer Module
- 12 to 24 Volt D.C. Operation
- Adjustable Time Delay
- SPDT (Form ″C″) Relay
- Low Current Input Trigger (<1mA)
- Selectable Positive or Negative trigger
$27.00Low Price Guarantee - $18.80SKU: 912
ELK 912 Relay SPDT 12V
- Low Current Draw
- Positive Or Negative Activation
- Form ″C″ Dry Contacts
- Elevator Style Screw Terminals
- Great For General Purpose Switching
$18.80Low Price Guarantee - $227.33SKU: P412
ELK P412 4-Amp Power Supply and Battery Charger, 12VDC
- Switching Power Supply, no transformer needed
- Auto Reset ″fuseless″ Overload Protection (PTC)
- Three (3) Individual PTC Protected Power Outputs
- Master Power On/Off Switch
- Built-in Low Battery Cutoff Circuit
$227.33Low Price Guarantee - $150.00SKU: POE47TS
ELK POE47TS Ethernet & PoE Adapter for ELK-7TS Touchscreen
- RJ45 port and pre-wired touchscreen connector for easy installation
- Power and Network LEDs indicators
- 15” cable to touchscreen
$150.00Low Price Guarantee - $137.78SKU: VT-1230A-D18
Vitek VT-1230A-D18 18 Output 12VDC Power Center
- 12VDC Multi-Output Transformer 40VA
- 4 to 18-Output Terminal strip connection
- Lock on power outlet screw
- UL Approved
- 5~30 Amp Output
$137.78Low Price Guarantee - $126.50SKU: 1233
ELK 1233 Sealed Lead Acid Battery 12V 3.3Ah
- Sealed Lead Acid battery with 12 volts and 3.3AH rated capacity
- Battery backup for access control systems, fire alarm systems and security alarm systems
- Use for emergency lights, lighted exit signs and uninterruptible power supplies
$126.50Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
