DNAKE Linear Ditek Power
Filter
- $61.10SKU: DTK-EXTMS
Ditek DTK-EXTMS Rapid Replacement Module for PoE Extender Circuits
- Uses SAD and GDT technologies for superior protection
- Robust 20kA per pair surge current rating
- Data speeds up to 10GbE without signal degradation
$61.10Low Price Guarantee - $28.00SKU: PS12-1-25
Linear PS12-1-25 Power Supply, Wall Mount, 100-240 V, 0.50A 12VDC, 1.25A Level VI
- Power Supply
- Wall Mount
- 100-240 V, 0.50A
- 12VDC, 1.25A Level VI
$28.00Low Price Guarantee - $198.00SKU: DTK-KG2
Ditek DTK-KG2 Kool Guard Series Intelligent Voltage Monitoring
- Protection for undervoltage & overvoltage events on 120/240VAC or 120/208VAC split phase circuits up to 40A
- Auto-calibration feature eliminates the need to manually calibrate the unit to the specific input voltage
- Safely disconnects power to the system for 3 minutes allowing input voltage to return to normal range
- Ideal protection for inverter-driven compressor systems and mini-splits
- Diagnostic red and green LEDs indicate exactly what voltage condition is present
$198.00Low Price Guarantee - $84.00SKU: DTK-MRJ45TDP12
Ditek DTK-MRJ45TDP12 Single Channel TDP Protector RJ45
- Single Channel TDP Protector RJ45
$84.00Low Price Guarantee - $63.60SKU: DTK-4LVLPCR
Ditek DTK-4LVLPCR Card Reader Surge Protection
- Series connection, parallel function adds no resistance to loop circuits
- Protect power, LED and data lines (4LVLPCR)
- Single ground point for all protected circuits
$63.60Low Price Guarantee - $979.71SKU: D200-277-4803Y
Ditek D200-277-4803Y 200KA/ø, 100kA, Mode Surge Protective Device
- 200,000 Amp/phase surge current rating ensures long service life
- Compact size enables close mounting to the protected panel to minimize wire length and maximize performance
- Diagnostic LED indicates system power and SPD function, Alarm and ground status
- Dry Contacts for remote monitoring
- Available in 7 voltage configurations
$979.71Low Price Guarantee - was $798.91 Special Price $765.00SKU: DTK-RM24NETS
Ditek DTK-RM24NETS 24 Channel Rackmount POE/Ethernet Protector, 1U, Shielded RJ45 In/Out, 10GbE
- Uses SAD and GDT technologies to provide optimal protection for shielded Ethernet, PoE and PoE extender circuits
- Rapid-replacement modular design allows modules to be swapped from front of device without removing from rack
- Robust 20kA per pair surge current capacity is the highest offered in a product designed for shielded network devices
- PoE Plus and HiPoE ready for high-wattage applications
- Optional modules available to support PoE Extender Circuits
was $798.91 Special Price $765.00Low Price Guarantee - $57.20SKU: DTK-120HW
Ditek DTK-120HW 120VAC Surge Protective Device
- Approved for 20A circuit breakers
- NEMA 4X weatherproof enclosure allows for use in harsh environments
- Diagnostic LED indicates ground presence, system power and SPD function
- Complies with ANSI/IEEE C62.41 and C62.45 category B standards
$57.20Low Price Guarantee - $195.99SKU: BC-MX5102
Linear BC-MX5102 Replacement Battery Pack (1) MX5102
- Battery Backup
- 600VA UPS, 2 Outlets
- Clean Power Level 3
$195.99Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
