DNAKE Linear Ditek MG Electronics Power
Filter
- $61.10SKU: DTK-EXTMS
Ditek DTK-EXTMS Rapid Replacement Module for PoE Extender Circuits
- Uses SAD and GDT technologies for superior protection
- Robust 20kA per pair surge current rating
- Data speeds up to 10GbE without signal degradation
$61.10Low Price Guarantee - $28.00SKU: PS12-1-25
Linear PS12-1-25 Power Supply, Wall Mount, 100-240 V, 0.50A 12VDC, 1.25A Level VI
- Power Supply
- Wall Mount
- 100-240 V, 0.50A
- 12VDC, 1.25A Level VI
$28.00Low Price Guarantee - $198.00SKU: DTK-KG2
Ditek DTK-KG2 Kool Guard Series Intelligent Voltage Monitoring
- Protection for undervoltage & overvoltage events on 120/240VAC or 120/208VAC split phase circuits up to 40A
- Auto-calibration feature eliminates the need to manually calibrate the unit to the specific input voltage
- Safely disconnects power to the system for 3 minutes allowing input voltage to return to normal range
- Ideal protection for inverter-driven compressor systems and mini-splits
- Diagnostic red and green LEDs indicate exactly what voltage condition is present
$198.00Low Price Guarantee - $80.40SKU: DTK-120-240CMX
Ditek DTK-120-240CMX 120/240 VAC, Parallel Protector, 2W(+G), UL1449 Listed SPD Type 1, 20kA In
- 50,000 Amp Total Surge Current Rating
- Diagnostic LED provides indication of power, ground presence and SPD function
- NEMA 4X weatherproof enclosure
- UL1449 Listed SPD Type 1
$80.40Low Price Guarantee - $15.95SKU: ST-122A
MG Electronics ST-122A 12VDC 2000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 12VDC 2000MA
- Two Screw Output Terminals
- Lightweight
- UL, cUL, FCC Listed
$15.95Low Price Guarantee - $38.94SKU: PS-8C
MG Electronics PS-8C Regulated and Filtered Power Supply with Cigarette Lighter Plug
- Thermal overheating protection with auto reset
- Input Fuse Protection
- Short circuit protection with auto reset
- Built-in voltage surge protection
- Low ripple
$38.94Low Price Guarantee - $63.60SKU: DTK-4LVLPCR
Ditek DTK-4LVLPCR Card Reader Surge Protection
- Series connection, parallel function adds no resistance to loop circuits
- Protect power, LED and data lines (4LVLPCR)
- Single ground point for all protected circuits
$63.60Low Price Guarantee - $84.00SKU: DTK-MRJ45TDP12
Ditek DTK-MRJ45TDP12 Single Channel TDP Protector RJ45
- Single Channel TDP Protector RJ45
$84.00Low Price Guarantee - $979.71SKU: D200-277-4803Y
Ditek D200-277-4803Y 200KA/ø, 100kA, Mode Surge Protective Device
- 200,000 Amp/phase surge current rating ensures long service life
- Compact size enables close mounting to the protected panel to minimize wire length and maximize performance
- Diagnostic LED indicates system power and SPD function, Alarm and ground status
- Dry Contacts for remote monitoring
- Available in 7 voltage configurations
$979.71Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Now Shopping by
Shopping Options 