Power
- $112.00SKU: RM-1612-DC
MG Electronics RM-1612-DC 16Ch 12VDC Rack Mount Power Supply
- Fits standard 19" EIA Rack mount fixtures
- Input 120VAC 50/60Hz
- Output Channels 16
- Output Voltage 12VDC
- Max Output 18AMP
$112.00Low Price Guarantee - $110.00SKU: CCB-8-12
Securitron CCB-8-12 Central Control Board, 12 VDC, 8 Fused Outputs
- CCB-8 expansion board is used to add 8 additional Class 2 polyswitch 2A output breakers to BPS Series power supplies larger than 1 Amp
- Slide switches connect or disconnect load from power
- LEDs monitor zone status (voltage, no voltage)
$110.00Low Price Guarantee - $102.00SKU: PWR-24AC-8-7
Samsung PWR-24AC-8-7 8-Camera 24VAC, 7.25A Power Supply
- Convenient screw and terminal and fuse access
- AC power LED indicator
- Power ON/OFF switch
- Individual LED's for each fused output
- Separation panel between transformers and output access
$102.00Low Price Guarantee - $102.00SKU: PDM-9
Comnet PDM-9 Low Voltage 9 Output Power Distribution Module
- Converts a single AC or DC Input to 9 protected outputs with fuses or circuit breakers
- All PTC circuit breaker ratings are holding current at 130oF per UL Standards
- Main Power Green/Red LED Indicates AC, DC or Reversed DC Input
- Each output has a green status LED indictor
- Main Fuse / Power Pull is standard ATO Automotive size
$102.00Low Price Guarantee - $100.99SKU: 561778
Intellinet 561778 Outdoor Vandal proof Gigabit High-Power PoE+ Injector
- Power over Ethernet with output up to 30 watts
- IP67-rated, dustproof and waterproof
- IK10-rated, vandal-proof
- Suitable for extreme operating temperatures of -40 to 75ºC (-40 to 167ºF)
- Compatible with IEEE 802.3at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more
$100.99Low Price Guarantee - $80.40SKU: DTK-2MHLP130FWB
Ditek DTK-2MHLP130FWB 130V, 2 Pair, Modular Telco Circuit Protector W/ Hardwired Base, 1A Fuse
- Protect two 24V pairs per module
- Multi-stage SAD technology provides the best possible protection
- Field-replaceable modules with hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground
$80.40Low Price Guarantee - $61.20$61.20Low Price Guarantee
- $45.50SKU: DTK-VM4536
Ditek DTK-VM4536 Modular Surge Protection for Shielded Cable, 36V
- Protect shielded analog, digital, high speed data and communications circuits
- Face plates accept up to 6 or 12 replaceable protection modules
- Single point ground for ease of installation
- Simplifies cable management where space is limited
$45.50Low Price Guarantee - $45.50SKU: DTK-VM4575
Ditek DTK-VM4575 Modular Surge Protection for Shielded Cable, 75V
- Protect shielded analog, digital, high speed data and communications circuits
- Face plates accept up to 6 or 12 replaceable protection modules
- Single point ground for ease of installation
- Simplifies cable management where space is limited
$45.50Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
