Altronix ACMS8CB 8 PTC Protected Outputs, Access Power Controller, Board

Altronix ACMS8CB 8 PTC Protected Outputs, Access Power Controller, Board

Altronix ACMS8 and ACMS8CB dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled PTC protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS8/ACMS8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8/ACMS8CB modules. This feature allows you to distribute the power over more outputs for larger systems.

Features

• Input Voltage Range: Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 16A total input for flexible power management.
• PTC Protected Outputs: PTC protected outputs rated @ 2A per output, ensuring safe and reliable operation with a total output of 16A max.
• Power Supply Ratings: Prevents exceeding individual power supply ratings for consistent performance and reliability.
• Servicing Mode: Individual outputs may be set to OFF position for servicing, enhancing maintenance convenience.
• Output Selection: Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2 to optimize power allocation.
• Surge Suppression: Protects against voltage spikes, extending the lifespan of connected devices.
• Fire Alarm Disconnect: Latching or non-latching disconnect is individually selectable, improving safety in emergency situations.
• LED Indicators: Red LEDs indicate outputs are triggered; Blue LED indicates FACP disconnect, providing a clear status of the system.

Detailed Specifications for Altronix ACMS8CB