Altronix EFLOW102NA8 8 Fused Relay Outputs Access Power Controller with Power Supply/Charger, BC400 Enclosure
- Input 120VAC 60Hz, 3.5 amp
- 12VDC outputs @ 10 amp supply current
- Eight (8) independently trigger controlled outputs
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)

Altronix EFLOW102NA8 Access Power Controller Features
The eFlow102NA8 distributes and switches power to access control systems and accessories. It converts a 120VAC 60Hz input into eight (8) independently controlled 12VDC fuse protected outputs with a total of 10 amp continuous supply current. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
Features
- Input: 120VAC 60Hz, 3.5 amp - Ensures compatibility with standard electrical systems.
- 12VDC outputs: 10 amp supply current - Provides ample power for connected devices.
- Eight (8) independently trigger controlled outputs: Allows individual device control for enhanced flexibility.
- AC fail supervision: Form "C" contacts - Ensures reliable operation and monitoring of power supply status.
- Battery fail & presence supervision: Form "C" contacts - Alerts to battery issues, ensuring safety and reliability.
- Low power shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% - Prevents damage and promotes battery longevity.
- Prevents deep battery discharge: Safeguards battery health and prolongs lifespan.
- AC input and DC output LED indicators: Provides clear visual feedback for operational status.
- Built-in charger: For sealed lead acid or gel type batteries - Versatile charging options for battery systems.
- Power Supply Board maximum charge current: 1.54 amp - Ensures efficient charging.
- Automatic switch over: To stand-by battery when AC fails - Guarantees uninterrupted power supply to critical devices.
- Zero voltage drop: When unit switches over to battery backup - Ensures continuous operation during power interruptions.
Altronix EFLOW102NA8 Detailed Specifications
| Input Voltage | 120VAC 60Hz |
| Input Current | 3.5 amp |
| Output Voltage | 12VDC |
| Maximum Output Current | 10 amp |
| Number of Outputs | Eight (8) independently controlled |
| AC Fail Supervision | Form "C" contacts |
| Battery Fail Supervision | Form "C" contacts |
| Low Power Shutdown | Batteries disconnection at 71-73% |
| LED Indicators | AC input and DC output |
| Built-in Charger | Sealed lead acid or gel type batteries |
| Max Charge Current | 1.54 amp |
| Switch Over Time | Instantaneous |
| Zero Voltage Drop | During switch to battery |
Tools & Calculators



