Power
- $15.95SKU: ST-122A
MG Electronics ST-122A 12VDC 2000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 12VDC 2000MA
- Two Screw Output Terminals
- Lightweight
- UL, cUL, FCC Listed
$15.95Low Price Guarantee - $379.68SKU: BGM1500-US
APC BGM1500-US Back-UPS Pro for Gaming, 1500VA/900W, Tower, 120V
- Replacement battery (1) is available
- Pure sine wave ouptut provides cleanest signal for active PFC servers and electronics
- AVR corrects voltage variations to provide reliable power
- Reactor circle visually alerts of remaining power, surges, dips, power outages, and building wiring faults
- 2 USB smart charging ports (Type A + C) to plug in your wireless gaming devices and mobile phone
$379.68Low Price Guarantee - $16.00SKU: LPD
Altronix LPD Low Power Disconnect Module
- Input voltage: 12VDC or 24VDC max. 8 amps
- Low voltage cutoff: 12VDC: 10.5 volts (+/--- 0.3 volts) 24VDC: 20 volts (+/--- 0.3 volts)
- Restore voltage threshold: 12VDC: 11.5 volts (+/--- 0.3 volts) 24VDC: 23 volts (+/--- 0.3 volts)
- Relay contact rating 8 amp max
$16.00Low Price Guarantee - $26.00SKU: CC7200
ENS CC7200 AC24-12VDC Converter
- 16-28V AC to 12V DC Converter
- 1500mA
- Voltage Stabilizer built-in
$26.00Low Price Guarantee - was $980.00 Special Price $971.00SKU: T2PXK7F8
Altronix T2PXK7F8 8-Door Access and Power Integration Kit Includes Trove2PX2 with eFlow104NB, ACM8, VR6, PDS8
- 24VDC @ 10A power supply charger
- Accommodates the following Paxton module Net2 Plus
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Eight (8) Fail-Safe/Fail-Secure outputs
- CE European Conformity
was $980.00 Special Price $971.00Low Price Guarantee - $198.00SKU: DTK-KG2
Ditek DTK-KG2 Kool Guard Series Intelligent Voltage Monitoring
- Protection for undervoltage & overvoltage events on 120/240VAC or 120/208VAC split phase circuits up to 40A
- Auto-calibration feature eliminates the need to manually calibrate the unit to the specific input voltage
- Safely disconnects power to the system for 3 minutes allowing input voltage to return to normal range
- Ideal protection for inverter-driven compressor systems and mini-splits
- Diagnostic red and green LEDs indicate exactly what voltage condition is present
$198.00Low Price Guarantee - $156.12SKU: AL300ULXB2
Altronix AL300ULXB2 Single Class 2 Output Power Supply Charger, 12/24VDC @ 2.5A, 115VAC, Board
- Input 115VAC 60Hz, 3.5 amp
- Input fuse rated @ 3.5 amp/250V
- 12VDC or 24VDC selectable output
- 2.5 amp total supply current
- Filtered and electronically regulated output
$156.12Low Price Guarantee - $1,723.17SKU: POE16ATN-EU
Pelco POE16ATN-EU 16 Port IEEE802.3at Midspan with European Power Cord
- Fully 802.3at Compliant Detection, Disconnect, Over Voltage, and Current Protection
- Diagnostic LEDs
- SNMP Network Management
- Optional Secure Sockets Layer (SSL) with SNMPv3
- 10/100/1000Base-T Compatibility
$1,723.17Low Price Guarantee - $1,327.00SKU: T2HWK712DV
Altronix T2HWK712DV 12-Door Altronix/Honeywell Access and Power Integration Kit
- Voltage: 220VAC (working range 198VAC-256VAC), 50/60Hz, 2.5A
- Failover: Upon AC loss, instantaneous
- DC Output: Powered
- Battery: Discharged or not connected
- Green: 12VDC
$1,327.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
