Pelco G35H2-2PAV2AK ImagePak High Resolution Col 2.5-6mm AI SuS Mount
- 650 TV Lines
- CS Mount
- Light Duty Wall Mount
- Used for the EH3512L and EH3512 series only
- Compatible with fixed/motorized lens cameras

The Pelco G3512-0PJV50A ImagePak consists of a Pelco models: EH3512, C20-DW-6, 13VD5-50, EM1450.
The C20-DW Series is an ultra high resolution digital camera with 650 TVL of resolution and 0.13 lux minimum illumination. Camera features include autosensing
power; 18 to 32 VAC (Revision A) or 12 VDC with AC line lock or internal synchronization) and automatic gain control (AGC). The C20-DW Series includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to
a strong backlight. The C20-DW Series also uses slow electronic shutter technology to improve the illumination performance for low-light environments. The C20-DW Series
has built-in analytical capabilities including privacy zones, motion detection, and camera titles that add to its functionality. These fine-tuning features are easily set using the
on-screen menus.
Pelco’s 13VD5-50 1/3-inch varifocal lenses offer versatile and flexible packages in one basic lens. Each auto iris lens in this series covers a specific range of focal
lengths. Adjust these lenses to get the exact field of view instead of “almost the right view.” Appropriate for indoor and outdoor lighting situations, the 13VD5-50 lenses will fit
all 1/3-inch CS-mount cameras requiring DC-drive auto iris lenses. In addition, all auto iris lenses include a spot filter. Lenses in the 13VD5-50 come with a standard square
4-pin plug installed for ease of installation and convenience.
The EH3512 are indoor/outdoor, low cost camera enclosures constructed from die-cast and extruded aluminum. The EH3512 has a lower body length of 32.38 cm
(12.75 inches).
The EM1450 is a light duty wall mount designed specifically for use with Pelco’s EH3500 Series enclosures. Manufactured from die-cast aluminum, the EM1450 is
capable of supporting a maximum load of 9 kg (20 lb) and can be safely mounted to any vertical load-bearing surface. The EM1450 features a small adjustable mounting head
that is unobtrusive and provides ample clearance between the cable feedthrough glands and the mounting head. The EM1450 can also be adapted for pole mount applications
when used with our PA101 adapter.
C20-DW-6 Analog Camera Features
- Wide Dynamic Range
- 650 TV Lines
- High Sensitivity
- Day/Night with Automatic or Manual Control
- 1/3-Inch Format CCD Imager
- Digital Signal Processing
- CS Lens Mount
- Autosensing DC Drive Auto Iris
- Automatic/Manual White Balance Settings for Difficult Lighting Situations
- Selectable Automatic Gain Control
- Advanced Backlight Compensation
- Autosensing Power; 18 to 32 VAC/12 VDC with Selectable AC Line Lock/Internal Synchronization (Revision A)
- 3D Digital Noise Reduction (DNR)
- Privacy Zones
13VD5-50 Varifocal Lens Features
- CS Mount
- Spot Filter
- For Use with 1/3-Inch Format Cameras
- Auto Iris, Manual Focus, and Zoom
- High Resolution Power in Compact Body
EH3512 Indoor/Outdoor Enclosure Features
- Low Cost
- Small, Contemporary Design
- Die-Cast and Extruded Aluminum Construction
- Forward-Opening Hinged Lid
- Rear Link-Lock Latch
- Cable Entry Glands and Mounting Holes on Bottom of Enclosure
- Designed for Indoor/Outdoor Applications
- Easy Access for Servicing and Installation
- Models Available with Factory-Installed Low Power Heater, Blower and Defroster, or with Heater and Defroster
EM1450 Mount Features
- Light Duty Wall Mount
- Maximum Load 20 lb (9 kg)
- For Use with EH3500 Series Enclosures
- Adjustable Head for Mechanical Positioning of the Enclosure
- Can Be Adapted for Pole Mount Applications with Use of PA101 Adapter
Tools & Calculators




