Network Switches
Power your IP cameras and NVRs cleanly with the right network switches. PoE/PoE+ simplifies cabling, while surveillance-friendly features like VLAN, QoS, IGMP Snooping, and port mirroring keep streams stable and secure. Choose from compact desktop models to rackmount and hardened industrial switches, then match your total PoE budget to the number of IP cameras you plan to run.
Featured Network Switch Manufacturers
- $1,722.00SKU: CNGE12FX4TX8MS
Comnet CNGE12FX4TX8MS 12-port All Gigabit Hardened Managed Switch (8) 10/100/1000Base-TX & (4) 100/1000Base-FX Ports
- SNMPv3, HTTPS, SSH Security features, TACACS+, IEEE1588v2 Timing, 802.1x, & DDMI
- EMC Performance: Industrial Level 4
- Supports Jumbo Frame
- Redundant technology: Supports RSTP/MSTP/C-Ring & G.8032 ERPS for ring and mesh topologies
- Supports IGMP Snooping, GMRP, and static multicast
$1,722.00Low Price Guarantee - $1,641.00SKU: AVN-S16-2P16W270G
Avycon AVN-S16-2P16W270G 16 Port 270w Gigabit PoE Switch
- IEEE802.3af / IEE802.3at Compliant
- 16 x 10/100/1000Base-TX Ports and 2 x 1000Mbps SFP Ports
- 16 x PoE / PoE+ ports, with each port supporting a 30W max. power output
- Total PoE budget of 243W
- High backplane bandwidth of 36 Gbps
$1,641.00Low Price Guarantee - $1,624.37SKU: AW-GTS-287A
Vivotek AW-GTS-287A 20xGE SFP + 4xCombo GE + 4x10G SFP+ L2 Plus Managed Switch
- 20xGE SFP + 4xCombo GE + 4x1G/10G SFP+ L2 Plus Managed Switch
- L2 Plus Managed Switch Provides Easier Manageability, Robust Security and QoS
- IPv4/IPv6 L3 Static Route and DHCP Server
- AC/DC Dual Power Supply for Redundant Design
- RS-232 Console, Telnet/Command Line Interface, SSH/SSL Secure Access, SNMP V1, V2c, V3, RMON, Web Browser, and TFTP Management
$1,624.37Low Price Guarantee - was $2,175.00 Special Price $1,624.00SKU: CNGE12FX4TX8MS-TS2
Comnet CNGE12FX4TX8MS-TS2 12-port All Gigabit Hardened Auto DOS/DDoS Protection High Security Managed Traffic Switch
- SNMPv3, HTTPS, SSH Security features, TACACS+, IEEE1588v2 Timing, 802.1x, & DDMI
- EMC Performance: Industrial Level 4
- Supports Jumbo Frame
- Redundant technology: Supports RSTP/MSTP/C-Ring & G.8032 ERPS for ring and mesh topologies
- Supports IGMP Snooping, GMRP, and static multicast
was $2,175.00 Special Price $1,624.00Low Price Guarantee - $1,621.55SKU: CBS350-24FP-4X
Cisco CBS350-24FP-4X 24-Port Gigabit PoE+ Compliant Managed Switch with SFP+ (370W)
- Equipped with an 800 MHz ARM processor and 512MB of memory, which work to deliver smooth and reliable data transfers with a 128 Gb/s switching capacity and 95.23 Mpps forwarding rate
- 24 PoE+ ports support up to 30W of power each, with a total budget of 370W to operate advanced surveillance cameras, videophones, thin client devices, and more
- Support for features such as IEEE 802.1x and port security limit access to specific segments of your network while web-based authentication provides a consistent interface to all types of host devices and operating systems
- Advanced defense mechanisms, such as dynamic Address Resolution Protocol (ARP) inspection, IP Source Guard, and Dynamic Host Configuration Protocol (DHCP) snooping, help to detect and block network attacks. When combined, these protocols may be referred to as IP-MAC port binding (IPMB)
- IPv6 First Hop Security suite includes ND inspection, RA guard, DHCPv6 guard, and neighbor binding integrity check to protect your IPv6 network against a range of address spoofing and man-in-the-middle attacks
$1,621.55Low Price Guarantee - Equipped with an 800 MHz ARM processor and 512MB of memory, which work to deliver smooth and reliable data transfers with a 128 Gb/s switching capacity and 95.23 Mpps forwarding rate
- $1,601.00SKU: CNGE2FE4SMSPoE
Comnet CNGE2FE4SMSPoE 6 Port Self-Managed Ethernet Switch, PoE
- No Programming Required
- 10/100/1000 Mbps Ethernet
- 10/100 BASE-T/TX electrical ports
- 1000 BASE-FX SFP ports for Gigabit operation
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
$1,601.00Low Price Guarantee - $1,599.51SKU: CNGE2FE8MSPOE+C
Comnet CNGE2FE8MSPOE+C Managed Ethernet Switch with (8) 10/100 BASE-TX + (2) 10/100/1000 BASE-TX/FX Combo Ports
- Redundant DC inputs for uninterrupted operation in the event of a loss of operating power or a power supply failure
- Centralized management via Windows utility, eConsole, configurable via browser, or byTelnet and console (CLI) ports
- Supports LLDP (Link Layer Discovery Protocol)
- Event notification through Syslog, E-mail, SNMP trap, and Relay Output
- Port lock to prevent access from unauthorized MAC address
$1,599.51Low Price Guarantee - $1,582.00SKU: JL677A
Aruba JL677A 6100 24G Class4 PoE 4SFP+ 370W Switch
- Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing
- Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices
- Compact and fanless 12 port model for quiet deployment
- Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba Net Edit
- Simple deployment with Zero Touch Provisioning
$1,582.00Low Price Guarantee - $1,581.66SKU: AT-IE220-10GHX-K90
Hanwha Vision AT-IE220-10GHX-K90 AT Industrial Rugged Switch with 8 x Gigabit Ethernet, PoE++ and Optional 2x 10G (SFP+)
- AT Industrial rugged switch with 4 x Gigabit Ethernet DIN Rail Mount
- PoE++
- optional 2x 10G (SFP+)
- 180W total PoE budget
- NDAA and TAA compliant
$1,581.66Low Price Guarantee
Network Switches Frequently Asked Questions
What is a network switch and how does it work?
A network switch is a device that connects multiple devices on a computer network, allowing them to communicate with each other. It uses MAC addresses to forward data only to the intended device, improving network efficiency and performance.
How many ports do I need on my network switch?
The number of ports you need depends on how many devices you plan to connect, such as cameras, computers, and other networked equipment. It's advisable to have a few extra ports for future expansions to avoid needing to replace the switch later.
What is PoE and why is it important for surveillance?
Power over Ethernet (PoE) allows network cables to carry electrical power along with data. This is important for surveillance systems as it simplifies installation by eliminating the need for separate power sources for cameras, making setup easier and more efficient.
Can I use a managed switch for my home security system?
Yes, a managed switch can be used for home security systems. It provides advanced features such as VLANs, traffic management, and enhanced security protocols, which can help optimize the performance and security of your surveillance network.
What are the benefits of using a gigabit switch for my surveillance system?
A gigabit switch offers faster data transfer rates, reducing latency and ensuring smooth video streaming from multiple cameras. This is crucial for high-resolution surveillance footage, as it allows for real-time monitoring and quick access to recorded video without delays.
Filter
Shopping Options
