Mounts
- $84.00SKU: S-C-PANEL-2U18
ENS S-C-PANEL-2U18 Cabinet Plate, 2U, 19 x 18"
- 2U blank rack filler/mounting panel; 19" wide; 18" depth; steel construction
- Fills 2U of unused rack space while providing an 18-inch deep mounting surface — the correct specification for deeper rack cabinets (24" or 30" deep) where a 15" panel would not span the full rack depth
- Maintains proper airflow by covering open rack slots; prevents hot air recirculation between the front and rear of the rack
- Mounts in standard 19" rack rails using standard rack screws; for the 15-inch depth variant
$84.00Low Price Guarantee - $72.00SKU: S-C-PANEL-2U15
ENS S-C-PANEL-2U15 Cabinet Plate, 2U, 19 x 15"
- 2U blank rack filler/mounting panel; 19" wide (standard rack width); 15" depth; steel construction
- Fills 2U of unused rack space in an equipment cabinet — blank panels maintain proper airflow by preventing hot air from equipment areas from recirculating through open rack slots
- 15-inch depth provides additional mounting real estate for attaching components, cable management accessories, or custom hardware to the inside of the panel
- Mounts in standard 19" rack rails using standard rack screws; the correct specification for 2U of rack space in installations where 15" panel depth is required or preferred
$72.00Low Price Guarantee - $170.00SKU: S-CABINET9U-W
ENS S-CABINET9U-W Open Frame Sever Cabinet, 9U, Wall Mountable
- 9U open frame wall-mount server cabinet; standard 19" rack mounting rails; no side panels or front door — maximum airflow and cable access from all sides
- 9U capacity: accommodates a complete mid-size security system stack — NVR (1–2U), PoE switch (1U), patch panel (1U), UPS (1–2U), and accessories — with more room than the 6U model and more compact than the 12U
- Open frame design: no panels restricting airflow or cable access; all sides of the rack remain accessible for cable routing, heat dissipation, and equipment service
- Wall-mount configuration: mounts to studs or masonry, keeping equipment elevated and organized without requiring floor space in the equipment area
$170.00Low Price Guarantee - $74.00SKU: BRACKET13-W
ENS BRACKET13-W Wall Mount for IP-5PT4IEN8-4X
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the bracket so that the installation look more elegant
- Wall mounting bracket for dome cameras
- Dust-proof design
$74.00Low Price Guarantee - $60.00SKU: B15-W
ENS B15-W Waterproof Junction Box B15-W for IP-5VPXXX3/MZ
- Aluminum alloy material with a surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Wall or ceiling mounting
- Water-proof design
$60.00Low Price Guarantee - $50.00SKU: PTM-512
ENS PTM-512 Pendant Mount for IP-5DT8E3N2-36
- Designed for IP-5DT8E3N2-36 Camera: Engineered for precise compatibility and secure mounting
- Durable Construction: Made from high-quality materials to provide long-lasting support and reliability
- Versatile Mounting Options: Suitable for pendant or ceiling installations to fit various surveillance requirements
- Optimized Camera Positioning: Enables proper placement for optimal camera coverage and performance
- Easy Installation: Designed for quick and straightforward setup with the specified camera model
$50.00Low Price Guarantee - $38.00SKU: PTM-506
ENS PTM-506 Pendant Mount for IP-5IRD, IP-5VP
- Pendant mount bracket for ENS IP-5IRD series IR dome cameras and IP-5VP series varifocal cameras; provides the mounting interface for pendant (pipe-drop) ceiling installation
- Pendant mounting positions the camera hanging below the ceiling surface, providing the correct downward viewing angle for coverage of the area directly beneath — the preferred configuration for high-ceiling warehouses, atriums, and production floors
- Metal construction provides structural rigidity and corrosion resistance for permanent overhead camera installation
$38.00Low Price Guarantee - $65.00SKU: PM-215
ENS PM-215 Pole Mount
- Pole or lamppost Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 163,3 (W) x 54,5 (D)
- Suitable for Inside / Outside
- Allows the internal cabling
$65.00Low Price Guarantee - $54.00SKU: PFB5203C
ENS PFB5203C In-Ceiling Mount Bracket
- The screws are embedded in the frame and the camera neatly installed into its bracket without hindering its visual range
- Easy to disassemble and maintain
- Easy to install and aesthetically pleasing
- The bracket is stable, as it firmly secures the camera in position on the ceiling
$54.00Low Price Guarantee - $56.00SKU: PFB2212C
ENS PFB2212C Universal Adjustable Pendent Brackets, 815-1500mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 815 to 1500 mm
$56.00Low Price Guarantee - $50.00SKU: PFB2211C
ENS PFB2211C Universal Adjustable Pendent Brackets, 475-800mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 475 to 800 mm
$50.00Low Price Guarantee - $42.00SKU: PFB2204W
ENS PFB2204W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W-B
ENS PFB2203W-B Weather Proof Wall Mount Bracket, Black
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W
ENS PFB2203W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $278.00SKU: PFA6400S
ENS PFA6400S Power Box for PTZ Wall Mount
- Made from aluminum alloy and SECC steel
- IP66 rated
- Easy to install, it supports the wall mount, pole mount and corner mount installation methods
- Highly adaptable, it can be used with PTZ cameras and IPCs
- Large enclosure that can accommodate many types of power adapters
$278.00Low Price Guarantee - $44.00SKU: PFA5300R
ENS PFA5300R Junction Box for Diamond Dual Lens Turret
- G3/4" Pipe Thread
- IP66 Ingress Protection
- 6.6 lb Load Capacity
- Aluminum Construction
$44.00Low Price Guarantee - $28.00SKU: PFA109
ENS PFA109 Pendent Mount Adapter
- Aluminum alloy material
- Matched with particular cameras, beautiful and elegant designed
$28.00Low Price Guarantee - $98.00SKU: ES1271ZJ-120
ENS ES1271ZJ-120 Pendant Mounting Bracket for Mini Dome Camera
- Suitable for dome camera pendant mounting
- Aluminum alloy material with a surface spray treatment
- Waterproof rubber suits for indoor/outdoor design
- The internal wiring makes the feature looks better
- The outlet hole is reserved for convenient wiring indoor
$98.00Low Price Guarantee - $18.00SKU: ES1250ZJ
ENS ES1250ZJ Rain Shade for Outdoor Dome Camera
- Plastic material with good tenacity and high reliability
- Water chute design for preventing rainwater from flowing to the camera housing
- Prevent direct sunlight and improve image quality
- Rain protection and six-level windproof
- Weaken the possibility of freezing
$18.00Low Price Guarantee - $60.00SKU: CRM-215
ENS CRM-215 Corner Mount Bracket
- Corner Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 215,1 (W) x 121,4 (D)
- Suitable for Inside / Outside
- Colour: White
$60.00Low Price Guarantee - $75.00SKU: CEM-139W
ENS CEM-139W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $49.00SKU: CEM-131W
ENS CEM-131W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Ceiling mounting bracket for fisheye cameras
$49.00Low Price Guarantee - $75.00SKU: CEM-118W
ENS CEM-118W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $80.00SKU: BRACKET14-W
ENS BRACKET14-W Wall Mount Arm with Pole Mount for 360° Multi Sensor
- Wall mount arm with integrated pole-mount capability for ENS 360° multi-sensor panoramic cameras; provides mounting to both flat wall surfaces and round poles or pipes
- Designed for multi-sensor panoramic cameras that require a specific mounting geometry to achieve their full 360° horizontal field of view — the camera must be positioned away from the wall surface to prevent the wall from blocking portions of the panoramic coverage zone
- Wall arm standoff provides the necessary clearance between the camera and the mounting surface; pole mount capability allows installation on light poles, sign posts, and other round structures commonly available at outdoor surveillance locations
- White finish; genuine ENS OEM bracket engineered for the specific multi-sensor camera models in the ENS lineup
$80.00Low Price Guarantee - $29.00SKU: B-131W
ENS B-131W Junction Box
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$29.00Low Price Guarantee - $45.00SKU: AR-38W
ENS AR-38W Arm
- Aluminum alloy material with surface spray treatment
- Wall mounting bracket for PTZ cameras
$45.00Low Price Guarantee - $75.00SKU: AR-139W
ENS AR-139W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $49.00SKU: AR-131W
ENS AR-131W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the bracket so that the installation look more elegant
- Wall mounting bracket for fisheye cameras
$49.00Low Price Guarantee - $75.00SKU: AR-118W
ENS AR-118W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $42.00SKU: WP-139W
ENS WP-139W Waterproof Junction Box for IP-5IRDXXX5/MZ & IP-5IRXXX3/MZ
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$42.00Low Price Guarantee - $40.00SKU: WP-139G
ENS WP-139G Waterproof Grey
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$40.00Low Price Guarantee - $37.00SKU: WP-118W
ENS WP-118W Waterproof Junction Box for IP-5IRDXXX4/28 & IP-5IRXXX2(1)/28
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$37.00Low Price Guarantee - $36.00SKU: WP-118G
ENS WP-118G Waterproof Grey
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$36.00Low Price Guarantee - $150.00SKU: S-CABINET6U-W
ENS S-CABINET6U-W Sever Cabinet, 6U (502 × 457 mm), Wall Mountable
- 6U wall-mountable server cabinet; external dimensions: 502mm × 457mm; accommodates standard 19" rack-mount equipment up to 6U in height
- Wall-mount format: mounts directly to a wall stud or masonry surface, keeping equipment organized, secure, and off the floor in small equipment rooms, closets, and back-of-house security equipment locations
- Locking enclosure protects rack-mounted NVRs, switches, and other equipment from unauthorized access, accidental damage, and dust; vented panels promote airflow to prevent overheating
$150.00Low Price Guarantee - $190.00SKU: S-CABINET12U-W
ENS S-CABINET12U-W 12U Open Frame Server Cabinet, Wall Mountable
- 12U Server Cabinet
- Wall Mountable
- 23.6" x 17.7" x 25.6"
$190.00Low Price Guarantee - $608.00$608.00Low Price Guarantee
- $64.09SKU: SHD-1000F1
Hanwha Vision SHD-1000F1 In-ceiling Mount Compatible with QNF-8010/9010, QNF-C9010
- Color : White
- Materials : PC(Polycarbonate)
- Dimensions (WXH) : ø137x131mm (ø5.39x5.15"), Ceiling hole size : ø119mm (ø4.69")
$64.09Low Price Guarantee - $24.27SKU: SBP-215C
Hanwha Vision SBP-215C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 225.66(W)x145.66(D)x10(H)/ 65g (0.11lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-180C
Hanwha Vision SBP-180C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 190.65(W)x190.65(D)x10(H)/ 69g (0.15lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-160C
Hanwha Vision SBP-160C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 170.65(W)x170.65(D)x10(H)/ 54g (0.11lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-140C
Hanwha Vision SBP-140C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 150.65(W)x150.65(D)x10(H) / 40g (0.08lb)
$24.27Low Price Guarantee - $304.50SKU: SBP-004WMW
Hanwha Vision SBP-004WMW Wall Mount Compatible with TNP Ruggedised PTZ Positioning Cameras
- Color : White
- Product dimensions / weight : 360x210x245mm(14.17x8.27x9.65”) / 3800g(8.38lb)
- Mount screw size : TR30
- Max. load : 15kg
- Reversible design for all installation mode-upright, canted, inverted
$304.50Low Price Guarantee - $123.25SKU: SBP-004PBW
Hanwha Vision SBP-004PBW Mounting Converter 4" to 4.75" for TNP Ruggedized PTZ Positioning Cameras
- Color : White
- Product dimensions / weight : 155x155x18mm(6.10x6.10x0.71”), 340g(0.75lb)
- Mount screw size : TR30
- Universal 4"(101.6mm) PCD Mounting converter for 4.75"(120.65mm) PCD Holes
- Compatible model : TNP-A6550RW, TNP-A7430RW, TNP-A9430RW
$123.25Low Price Guarantee - $73.08SKU: SBO-BPM0
Hanwha Vision SBO-BPM0 Pivot Bracket for Mono BCR Cameras
- Material: Stainless(SUS316L)
- Mount Screw size(Hexagonal screw): 6mm
- Max. load: 5kg
- Adjustment Angle: 0 ~ 120°
- Supported products: TNS-7000M
$73.08Low Price Guarantee - $359.00SKU: Z-BRACKET
Dotworkz Z-BRACKET Modular Non-Penetrating Wall and Corner Mount System
- Non-penetrating mounting system using mechanical pressure
- Dual configuration support: straight-wall and corner-wall installation
- Supports small, large, and extra-large (combined) arm sets for variable span requirements
- Three-axis leveling support with bubble levels
- Compatible with multiple commercial mounting patterns for Dotworkz housings and many Axis products
$359.00Low Price Guarantee - $799.00SKU: SKYPOD-25
Dotworkz SKYPOD-25 Skypod Portable Camera Tripod
- Lightweight (35 lbs total) – no trailer needed
- Durable: built for indoor and outdoor use
- Rapid setup: deploys in under 3 minutes
- Compatible with most PTZ, 360°, and tripod-ready cameras
- Cable routing for power, network, or 5G uplinks
$799.00Low Price Guarantee - $40.62SKU: PMT1B
Speco PMT1B Pole Mount for Select Dome & Bullet Cameras, Black
- For Select Dome \& Bullet Cameras
- Multiple Mounting Holes
- 3 x Adjustable Pole Straps Built-In
- NDAA Compliant
$40.62Low Price Guarantee - $34.19SKU: WMT1B
Speco WMT1B Wall Mount, Black
- Wall mount bracket for Speco cameras including O4B7M, O2BFRM, O8B7M, O2BLP1M, VLD6M, O2VT1V, O4VT1VM, O4T7M, and O8FBMS1; designed for wall-surface installation when ceiling mounting is not practical
- Black finish: matches black housing camera variants for a consistent professional appearance; for white cameras, use the white WMT1 variant; for dark gray cameras, use WMT1G
- Wall mount format: attaches the camera to a flat wall surface, enabling downward and outward viewing angles from the wall — ideal for building exteriors, corridor coverage, parking structure coverage, and building perimeter monitoring
- Genuine Speco OEM wall mount; NDAA compliant
$34.19Low Price Guarantee - $31.19SKU: O4D6WMG
Speco O4D6WMG Wall Mount, Dark Gray
- Wall mount for select Speco dome cameras including O4D6M, O8D6M, VLDT6, and O4VLD5; designed for use when ceiling installation is not practical
- Wall mount format: mounts the camera to a flat wall surface, angling the camera downward and outward from the wall to provide coverage of the area in front of the wall — ideal for building entrances, parking lot coverage from building walls, and exterior perimeter monitoring
- Adjustable camera positioning allows precise downward angle adjustment to optimize the field of view after mounting
- Genuine Speco OEM mount
$31.19Low Price Guarantee - $32.89SKU: JB4B
Speco JB4B Junction Box (Black) for Blue Varifocal Turret Camera
- For Blue Varifocal Turret Cameras
- Compatible with Select Mounts
- Provides Cable Management
$32.89Low Price Guarantee
Mounts Frequently Asked Questions
What types of mounts are available for surveillance cameras?
There are several types of mounts available for surveillance cameras, including wall mounts, pole mounts, pendant mounts, and junction boxes. Each type serves a specific purpose, allowing for flexible installation options based on the camera's location and the environment. For example, wall mounts are ideal for fixed installations, while pole mounts can be used for cameras on tall structures.
How do I choose the right mount for my camera?
To choose the right mount for your camera, consider the camera's weight, the installation surface, and the desired angle of view. Ensure that the mount can support the camera's weight and is compatible with its design. Additionally, evaluate the environment where the camera will be installed, as some mounts are designed for outdoor use and may offer weather resistance.
Can I use the same mount for different camera models?
While some mounts are compatible with various camera models, many are designed specifically for certain types or brands. It is crucial to check the mount's specifications and compatibility with your camera model before purchasing. Using an incompatible mount can lead to instability or damage to the camera.
What materials are commonly used for camera mounts?
Camera mounts are typically made from materials such as aluminum, steel, or plastic. Aluminum and steel mounts are preferred for their durability and strength, especially in outdoor settings, while plastic mounts may be used for lighter indoor applications. The choice of material can affect the mount's longevity and ability to withstand environmental conditions.
Are mounts adjustable for different angles and positions?
Many camera mounts feature adjustable components that allow for changing angles and positions. These adjustments can help optimize the camera's field of view and ensure it captures the desired area. However, not all mounts have this capability, so it is important to verify the adjustability of a specific mount before purchasing.
Filter
Shopping Options
