Mounts
- $37.00SKU: IPM-JBLARGE
InVid IPM-JBLARGE Junction Box for PAR-ALLTXIRA27135D
- Junction Box for PAR-ALLTXIRA27135D
$37.00Low Price Guarantee - $37.00SKU: WP-118W
ENS WP-118W Waterproof Junction Box for IP-5IRDXXX4/28 & IP-5IRXXX2(1)/28
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$37.00Low Price Guarantee - $36.99SKU: 727-12
Panavise 727-12 Slimline Pedestal, 12-inch
- Overall mount height (including shaft) is 12" (304.8mm)
- 210° Tilt, 360° Turn & 360° Rotation at both ends
- Aluminum, zinc and steel construction
- Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
- Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
$36.99Low Price Guarantee - $36.99SKU: 336-V100
Panavise 336-V100 Work Station Mount 100MM Plate
- Fully adjustability, 90° Tilt, 360° Turn & 360° Rotation, for precise screen positioning
- Includes knob or set-screw adjusting options (not pictured)
- Accepts any 5/8" (15.9mm) diameter shaft
- 100mm VESA compatible mounting plate
- Match with 6" stand (960-06) or 9" stand (960-09)
$36.99Low Price Guarantee - $36.99SKU: 336-V75
Panavise 336-V75 Work Station Mount 75mm Plate
- Fully adjustability 90° Tilt, 360° Turn & 360° Rotation for precise screen positioning
- Includes knob or set-screw adjusting options (not pictured)
- Accepts any 5/8" (15.9mm) diameter shaft
- Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg)
- 75mm VESA compatible mounting plate
$36.99Low Price Guarantee - $36.95$36.95Low Price Guarantee
- $36.95SKU: SBV-125BW
Hanwha Vision SBV-125BW Back Box for Flateye Cameras, White
- White back box for QNE-8011R / QNE-8021R flateye cameras.
$36.95Low Price Guarantee - $36.95SKU: NEZ-A4-SMB
Bosch NEZ-A4-SMB Surface Mount Box for Dome 4000 HD Series
- Surface Mount Kit for Autodome IP 4000 HD
- White
$36.95Low Price Guarantee - $36.92$36.92Low Price Guarantee
- $36.88SKU: CT-PLB-18B
SecurityTronix CT-PLB-18B Wall Mount for Plasma or LCD Television/Monitor, Black
- Universal wall bracket for 23"-37" plasma/LCD with movable arm systems
- Simple design
- Hardware included
- Max loading capacity: 165lbs
- Tilt downwards 15 degrees
$36.88Low Price Guarantee - $36.63SKU: CM1
Hikvision CM1 Corner Mount
- Stainless Steel Material with Surface Spray Treatment
- Extends Camera's Field of View
$36.63Low Price Guarantee - $36.63SKU: IIR-MNT-SLB
IQsight by Bosch IIR-MNT-SLB Single L-Bracket
- L-mount wall bracket for single illuminator
- 180° rotation
- Fully adjustable
- Stainless steel construction
$36.63Low Price Guarantee - $36.63SKU: NDA-3083-SMB
IQsight by Bosch NDA-3083-SMB SMB with 4S and Conduit Support, 137MM
- Sturdy construction
- Easy installation
- Anti-rust treated
- Easy cable management
- 4S and conduit support
$36.63Low Price Guarantee - $36.53SKU: WH-4G
Ikegami, WH-4G, Wall / Ceiling & T- Bar Mount, Grey
- 6" (152.4mm) overall mount length
- Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
- Use the Tri?Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25
$36.53Low Price Guarantee - $36.50SKU: 797-12
Panavise 797-12 UniFlex Mount
- Overall mount length (including the shaft) is 12" (304.8mm)
- Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
- Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
- We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
- Knob and set-screw adjusting options included
$36.50Low Price Guarantee - $36.49SKU: SRXP4-PM-1E
Pelco SRXP4-PM-1E Pendant NPT Adapter for Sarix Pro 4 Dome Camera
- Pendant NPT Adapter for Sarix Pro 4 Dome Camera
$36.49Low Price Guarantee - $36.48SKU: N5T-N5P-J01
Luminys N5T-N5P-J01 Standard Turret Size Junction Box
- For Select N5T, N5P, N3T Standard Size Turret Camera Models
- Aluminum Construction
- Dimensions: Φ144.07 mm x 40.00 mm (Φ5.67 in. x 1.57 in.)
- Max. Load Capacity: 3.0 kg (6.6 lb)
- IP66, IK10
$36.48Low Price Guarantee - $36.45SKU: WB8
Bogen WB8 Wall Baffle for 8" Speakers
- Constructed of 3/8" particle board with reinforced corners
- Sloping front panel (13.5 degrees) provides enhanced downward dispersion
$36.45Low Price Guarantee - $36.45SKU: PC155B
Hikvision PC155B Pendant Cap for Dome Camera, Black
- Aluminum Alloy with Surface Spray Treatment
- Indoor/Outdoor Use
$36.45Low Price Guarantee - $36.38SKU: DWC-VVLWM
Digital Watchdog DWC-VVLWM Wall Mount for Value Line Vandal Domes
- Wall Mount for Value Line Vandal Domes
$36.38Low Price Guarantee - $36.25SKU: DWC-MVTJUNC2
Digital Watchdog DWC-MVTJUNC2 Junction Box for Varifocal Lens Dome Camera with Video Analytics
- Junction Box for Varifocal Lens Dome Camera with Video Analytics
$36.25Low Price Guarantee - $36.19SKU: CMT1
Speco CMT1 Corner Mount for O4B6M, O4D6M, O4DT5, O4DT6M, O4VLB5
- Corner Mount for O4B6M, O4D6M, O4DT5, O4DT6M, O4VLB5, O4VLD5, O8B6M, O8D6M, O4B6, O4B7M, O4D6, O4D7
$36.19Low Price Guarantee - $36.06SKU: LTC-9215-00S
IQsight by Bosch LTC-9215-00S 7 Inch Wall Mount for 938x Series & 948x Series Housings
- Feed-through Wall Mount
- Maximum Load 9 kg (20 lb)
- Mounting Head Adjustable 360 degree pan, 180 degree tilt
- Finish Light gray
- Approx. Weight 0.4 kg (0.9 lb)
$36.06Low Price Guarantee - $36.04SKU: ZC8-PM2
Ganz ZC8-PM2 Outdoor Pendant Mount for 8000-Series Dome Cameras
- Used for Dome Camera
- Pendant Mount
$36.04Low Price Guarantee - $36.00SKU: CB155
Hikvision CB155 Bracket Conduit Base Junction Box
- Aluminum Alloy with Surface Spray Treatment
- With Cable Outlet(s)
- Indoor and Outdoor Use
$36.00Low Price Guarantee - $36.00SKU: ES1280ZJ-DM55
ENS ES1280ZJ-DM55 Weather Proof Junction Box
- Weather Proof J-BOX
- For SIP(44D3A/MZ)/(46D3A/MZ)/(48D3A/MZ)/(44D3A/MZ)
$36.00Low Price Guarantee - $36.00SKU: B10-W
ENS B10-W Junction Box for Camera
- Material: Aluminum alloy
- Color: White
- Ingress Protection: IP66
- Packing Size: 375 x 330 x 310mm
- Dimension (mm): 139.3 x 42
$36.00Low Price Guarantee - $36.00SKU: ES1671ZJ-SD11
ENS ES1671ZJ-SD11 In-Pendent Mount FOR SPT4C425IR-E, SPT4C415IR-E, ESNP1A14-IR/25X
- In-Pendent Mount FOR SPT4C425IR-E, SPT4C415IR-E, ESNP1A14-IR/25X
$36.00Low Price Guarantee - $36.00SKU: DWC-GPLT-W
Digital Watchdog DWC-GPLT-W Converter Plate for Electrical Gang Box, White
- Converter Plate for Electrical Gang Box, White
$36.00Low Price Guarantee - $36.00SKU: DWC-MBTJUNCW
Digital Watchdog DWC-MBTJUNCW Junction Box for Bullet Camera
- Junction box for bullet cameras
- Aluminum alloy material with finish spray treatment
- White-color finish
- Side and front 1/2" conduit entraces for versatille installation
- For indoor and outdoor use
$36.00Low Price Guarantee - $36.00SKU: DWC-GPLT
Digital Watchdog DWC-GPLT Converter Plate for Electrical Gang Box
- Converter Plate for Electrical Gang Box
$36.00Low Price Guarantee - $36.00SKU: DWC-MBTJUNC
Digital Watchdog DWC-MBTJUNC Junction box for Bullet Camera with Video Analytics
- Junction box for Bullet Camera with Video Analytics
$36.00Low Price Guarantee - $35.99SKU: 827-09
Panavise 827-09 Deluxe Camera Mount, 9-inch (Black)
- 9" (228.6mm) overall mount length
- Both adjusting points have a full range of motion: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
- 1/4-20 mounting stud with lockring
- Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
- Knob and tamper-resistant set-screw adjusting options included
$35.99Low Price Guarantee - $35.98SKU: PFA138
ENS PFA138 Junction Box
- Material: aluminum
- Junction box
- Aesthetic design
- Safety rope hook attached, secure and reliable
$35.98Low Price Guarantee - $35.95SKU: IM-PMWT
Pelco IM-PMWT Pendant Mount White Sarix IM Series
- Camera Mounting Proprietary, Bracket Required*
- Outdoor Use No
- Construction Plastic
- Finish White
- Load Capacity Up to 25 Lbs.
$35.95Low Price Guarantee - $35.92SKU: 51-MT70420-0001
Geovision GV-Mount704 Extension Tube for EBD8800, TVD8710
- Dimensions: ∅3.5 x 10 or 20 or 30 or 50 cm (∅1.38 x 3.9 or 7.9 or 11.8 or x 19.7")
- Weight: 225 g or 360 g or 500 g or 780 g (0.5 lb or 0.79 lb or 1.1 lb or 1.72 lb)
$35.92Low Price Guarantee - $35.89SKU: IVM-POLE1
InVid IVM-POLE1 Pole Mount for Vision Series Dome & Most Bullets, White
- Pole Mount for Vision Series Dome & Most Bullets, White
- Use with: VIS-DRXIRA2812 & Most Bullets (Use with Bullet Mount)
$35.89Low Price Guarantee - $35.88SKU: IBPM-M-WB-IS
American Dynamics IBPM-M-WB-IS Flex Multisensor Pole Mount
- Flex Multisensor Pole Mount
$35.88Low Price Guarantee - $35.87SKU: CCUFM-C-K
EMI Security CCUFM-C-K Clip Base Camera Flex Mount
- Quick and easy installation and removal
- Tether cable prevents camera from falling
- Unlimited camera positioning
- Durable rubber on jaws and handles
$35.87Low Price Guarantee - $35.86SKU: BPS-2
American Fibertek BPS-2 Two Slot Blank Panel Cover
- Available for 1, 2 or 4 slots
- Matching Black Paint
- Aluminum Construction
- ¼ Turn Fasteners
$35.86Low Price Guarantee - $35.80SKU: IS20DWS-WM
Pelco IS20DWS-WM Indoor Wall Mount for IS20-DWS Series
- Specifically Designed to Compliment All Camclosure 2 Series Camera Systems
- Indoor and Outdoor Use
- Pendant Options for All Models
- Integrated Wall Mounts in IS20 Series
- Flush Mount Kits Available for All Models
$35.80Low Price Guarantee - $35.75SKU: NDA-WMT-MICDOME
Bosch NDA-WMT-MICDOME Microdome Pendant Wall Mount
- Sturdy construction
- Easy installation
- Hollow core for cable-free appearance
- Tough 4-bolt anchoring
$35.75Low Price Guarantee - $35.75$35.75Low Price Guarantee
- $35.72SKU: DWC-V8CMJ
Digital Watchdog DWC-V8CMJ Ceiling Mount and Junction Box for V8 Analog Dome Cameras
- Junction Box for V8 Analog Dome Cameras
- Ceiling Mount
$35.72Low Price Guarantee - $35.70SKU: CT-1280ZJ-DM22
Cantek CT-1280ZJ-DM22 Junction Box for NC3xx-WD, -WDA-WDC
- Aluminum alloy material with surface spray treatment
- Waterproof design
$35.70Low Price Guarantee - $35.63SKU: ZA8-CBK501
Ganz ZA8-CBK501 Wall Mount for ZN8-VD4M212-NIR, Z8-VD2V-2, Z8-VD2M-2 Domes
- Wall Mount for ZN8-VD4M212-NIR, Z8-VD2V-2, Z8-VD2M-2 Domes
$35.63Low Price Guarantee - $35.62$35.62Low Price Guarantee
- $35.62$35.62Low Price Guarantee
- $35.56SKU: VT-TJB-F1
Vitek VT-TJB-F1 Junction Box for VTD-TND6FP Fisheye Dome Camera
- Junction Box for VTD-TND6FP Fisheye Dome Camera
$35.56Low Price Guarantee - $35.56SKU: VT-TFMT-L
Vitek VT-TFMT-L Semi Flush Ceiling Dome Mount for Large Motorized Vandal Dome Camera, Ivory
- Semi Flush Ceiling Dome Mount for Large Motorized Vandal Dome
- Ivory Color
$35.56Low Price Guarantee
Mounts Frequently Asked Questions
What types of mounts are available for surveillance cameras?
There are several types of mounts available for surveillance cameras, including wall mounts, pole mounts, pendant mounts, and junction boxes. Each type serves a specific purpose, allowing for flexible installation options based on the camera's location and the environment. For example, wall mounts are ideal for fixed installations, while pole mounts can be used for cameras on tall structures.
How do I choose the right mount for my camera?
To choose the right mount for your camera, consider the camera's weight, the installation surface, and the desired angle of view. Ensure that the mount can support the camera's weight and is compatible with its design. Additionally, evaluate the environment where the camera will be installed, as some mounts are designed for outdoor use and may offer weather resistance.
Can I use the same mount for different camera models?
While some mounts are compatible with various camera models, many are designed specifically for certain types or brands. It is crucial to check the mount's specifications and compatibility with your camera model before purchasing. Using an incompatible mount can lead to instability or damage to the camera.
What materials are commonly used for camera mounts?
Camera mounts are typically made from materials such as aluminum, steel, or plastic. Aluminum and steel mounts are preferred for their durability and strength, especially in outdoor settings, while plastic mounts may be used for lighter indoor applications. The choice of material can affect the mount's longevity and ability to withstand environmental conditions.
Are mounts adjustable for different angles and positions?
Many camera mounts feature adjustable components that allow for changing angles and positions. These adjustments can help optimize the camera's field of view and ensure it captures the desired area. However, not all mounts have this capability, so it is important to verify the adjustability of a specific mount before purchasing.
Filter
Shopping Options
