Mounts
- $84.00SKU: S-C-PANEL-2U18
ENS S-C-PANEL-2U18 Cabinet Plate, 2U, 19 x 18"
- 2U blank rack filler/mounting panel; 19" wide; 18" depth; steel construction
- Fills 2U of unused rack space while providing an 18-inch deep mounting surface — the correct specification for deeper rack cabinets (24" or 30" deep) where a 15" panel would not span the full rack depth
- Maintains proper airflow by covering open rack slots; prevents hot air recirculation between the front and rear of the rack
- Mounts in standard 19" rack rails using standard rack screws; for the 15-inch depth variant
$84.00Low Price Guarantee - $72.00SKU: S-C-PANEL-2U15
ENS S-C-PANEL-2U15 Cabinet Plate, 2U, 19 x 15"
- 2U blank rack filler/mounting panel; 19" wide (standard rack width); 15" depth; steel construction
- Fills 2U of unused rack space in an equipment cabinet — blank panels maintain proper airflow by preventing hot air from equipment areas from recirculating through open rack slots
- 15-inch depth provides additional mounting real estate for attaching components, cable management accessories, or custom hardware to the inside of the panel
- Mounts in standard 19" rack rails using standard rack screws; the correct specification for 2U of rack space in installations where 15" panel depth is required or preferred
$72.00Low Price Guarantee - $170.00SKU: S-CABINET9U-W
ENS S-CABINET9U-W Open Frame Sever Cabinet, 9U, Wall Mountable
- 9U open frame wall-mount server cabinet; standard 19" rack mounting rails; no side panels or front door — maximum airflow and cable access from all sides
- 9U capacity: accommodates a complete mid-size security system stack — NVR (1–2U), PoE switch (1U), patch panel (1U), UPS (1–2U), and accessories — with more room than the 6U model and more compact than the 12U
- Open frame design: no panels restricting airflow or cable access; all sides of the rack remain accessible for cable routing, heat dissipation, and equipment service
- Wall-mount configuration: mounts to studs or masonry, keeping equipment elevated and organized without requiring floor space in the equipment area
$170.00Low Price Guarantee - $74.00SKU: BRACKET13-W
ENS BRACKET13-W Wall Mount for IP-5PT4IEN8-4X
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the bracket so that the installation look more elegant
- Wall mounting bracket for dome cameras
- Dust-proof design
$74.00Low Price Guarantee - $60.00SKU: B15-W
ENS B15-W Waterproof Junction Box B15-W for IP-5VPXXX3/MZ
- Aluminum alloy material with a surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Wall or ceiling mounting
- Water-proof design
$60.00Low Price Guarantee - $50.00SKU: PTM-512
ENS PTM-512 Pendant Mount for IP-5DT8E3N2-36
- Designed for IP-5DT8E3N2-36 Camera: Engineered for precise compatibility and secure mounting
- Durable Construction: Made from high-quality materials to provide long-lasting support and reliability
- Versatile Mounting Options: Suitable for pendant or ceiling installations to fit various surveillance requirements
- Optimized Camera Positioning: Enables proper placement for optimal camera coverage and performance
- Easy Installation: Designed for quick and straightforward setup with the specified camera model
$50.00Low Price Guarantee - $38.00SKU: PTM-506
ENS PTM-506 Pendant Mount for IP-5IRD, IP-5VP
- Pendant mount bracket for ENS IP-5IRD series IR dome cameras and IP-5VP series varifocal cameras; provides the mounting interface for pendant (pipe-drop) ceiling installation
- Pendant mounting positions the camera hanging below the ceiling surface, providing the correct downward viewing angle for coverage of the area directly beneath — the preferred configuration for high-ceiling warehouses, atriums, and production floors
- Metal construction provides structural rigidity and corrosion resistance for permanent overhead camera installation
$38.00Low Price Guarantee - $65.00SKU: PM-215
ENS PM-215 Pole Mount
- Pole or lamppost Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 163,3 (W) x 54,5 (D)
- Suitable for Inside / Outside
- Allows the internal cabling
$65.00Low Price Guarantee - $54.00SKU: PFB5203C
ENS PFB5203C In-Ceiling Mount Bracket
- The screws are embedded in the frame and the camera neatly installed into its bracket without hindering its visual range
- Easy to disassemble and maintain
- Easy to install and aesthetically pleasing
- The bracket is stable, as it firmly secures the camera in position on the ceiling
$54.00Low Price Guarantee - $56.00SKU: PFB2212C
ENS PFB2212C Universal Adjustable Pendent Brackets, 815-1500mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 815 to 1500 mm
$56.00Low Price Guarantee - $50.00SKU: PFB2211C
ENS PFB2211C Universal Adjustable Pendent Brackets, 475-800mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 475 to 800 mm
$50.00Low Price Guarantee - $42.00SKU: PFB2204W
ENS PFB2204W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W-B
ENS PFB2203W-B Weather Proof Wall Mount Bracket, Black
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W
ENS PFB2203W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $278.00SKU: PFA6400S
ENS PFA6400S Power Box for PTZ Wall Mount
- Made from aluminum alloy and SECC steel
- IP66 rated
- Easy to install, it supports the wall mount, pole mount and corner mount installation methods
- Highly adaptable, it can be used with PTZ cameras and IPCs
- Large enclosure that can accommodate many types of power adapters
$278.00Low Price Guarantee - $44.00SKU: PFA5300R
ENS PFA5300R Junction Box for Diamond Dual Lens Turret
- G3/4" Pipe Thread
- IP66 Ingress Protection
- 6.6 lb Load Capacity
- Aluminum Construction
$44.00Low Price Guarantee - $28.00SKU: PFA109
ENS PFA109 Pendent Mount Adapter
- Aluminum alloy material
- Matched with particular cameras, beautiful and elegant designed
$28.00Low Price Guarantee - $98.00SKU: ES1271ZJ-120
ENS ES1271ZJ-120 Pendant Mounting Bracket for Mini Dome Camera
- Suitable for dome camera pendant mounting
- Aluminum alloy material with a surface spray treatment
- Waterproof rubber suits for indoor/outdoor design
- The internal wiring makes the feature looks better
- The outlet hole is reserved for convenient wiring indoor
$98.00Low Price Guarantee - $18.00SKU: ES1250ZJ
ENS ES1250ZJ Rain Shade for Outdoor Dome Camera
- Plastic material with good tenacity and high reliability
- Water chute design for preventing rainwater from flowing to the camera housing
- Prevent direct sunlight and improve image quality
- Rain protection and six-level windproof
- Weaken the possibility of freezing
$18.00Low Price Guarantee - $60.00SKU: CRM-215
ENS CRM-215 Corner Mount Bracket
- Corner Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 215,1 (W) x 121,4 (D)
- Suitable for Inside / Outside
- Colour: White
$60.00Low Price Guarantee
Mounts Frequently Asked Questions
What types of mounts are available for surveillance cameras?
There are several types of mounts available for surveillance cameras, including wall mounts, pole mounts, pendant mounts, and junction boxes. Each type serves a specific purpose, allowing for flexible installation options based on the camera's location and the environment. For example, wall mounts are ideal for fixed installations, while pole mounts can be used for cameras on tall structures.
How do I choose the right mount for my camera?
To choose the right mount for your camera, consider the camera's weight, the installation surface, and the desired angle of view. Ensure that the mount can support the camera's weight and is compatible with its design. Additionally, evaluate the environment where the camera will be installed, as some mounts are designed for outdoor use and may offer weather resistance.
Can I use the same mount for different camera models?
While some mounts are compatible with various camera models, many are designed specifically for certain types or brands. It is crucial to check the mount's specifications and compatibility with your camera model before purchasing. Using an incompatible mount can lead to instability or damage to the camera.
What materials are commonly used for camera mounts?
Camera mounts are typically made from materials such as aluminum, steel, or plastic. Aluminum and steel mounts are preferred for their durability and strength, especially in outdoor settings, while plastic mounts may be used for lighter indoor applications. The choice of material can affect the mount's longevity and ability to withstand environmental conditions.
Are mounts adjustable for different angles and positions?
Many camera mounts feature adjustable components that allow for changing angles and positions. These adjustments can help optimize the camera's field of view and ensure it captures the desired area. However, not all mounts have this capability, so it is important to verify the adjustability of a specific mount before purchasing.
Filter
Shopping Options
