Installation Tools & Supplies
- $383.18SKU: ICCMSCMA83
ICC ICCMSCMA83 4”x5”x78”, Double-Sided, Vertical Finger Duct Panel
- Provides flexibility for vertical cable management for the front and back of a rack
- Fits on the sides of individual racks but can also be used to join two distribution racks
- Equipped with feed-through holes on the back side for easier cable routing from front to back or back to front
- Includes covers to conceal routed cables providing a neat and clean appearance
- Compatible with all ICC distribution racks
$383.18Low Price Guarantee - $69.37SKU: AW22-6ST-500
Security Dynamics AW22-6ST-500 22/6 Stranded Shrink Wrap Roll Alarm Wire, 500 Feet
- 22/6 Stranded Alarm Wire
- 500 Feet
- Shrink Wrap Roll
$69.37Low Price Guarantee - $102.19SKU: WP-807BMBM-50
West Penn WP-807BMBM-50 RG8X 50Ohm BNC to BNC Assemblies Non-Plenum Cable 50 Feet
- Transmission performance 1GHZ
- UL Certified Cable CMR Rating
- 100% factory transmission tested
- BNC Compression Rating Return Loss: Up to 1GHz
- Ultra Flex Design
$102.19Low Price Guarantee - $566.28SKU: PEX-MMXCABARM10
Pelco PEX-MMXCABARM10 Replacement 10M Armored Cable for EXC2602 Compact Camera
- Replacement 10M Armored Cable for EXC2602 Compact Camera
$566.28Low Price Guarantee - $415.91SKU: JH718
Platinum Tools JH718 Xtender Pole-18 (Three 6' (1.83 m) Sections)
- Install hanging hardware from work floor, improves safety and efficiency
- All-In-One adapter system for threaded rod, eye lag screws, wire & jack chain
- Includes female hex adapter for 1/4" male driver and 5/8" hex adapter
- Video instructions for applications
- Tips & Instruction Booklet
$415.91Low Price Guarantee - $368.49SKU: DPR302-NIST
Triplett DPR302-NIST Differential Pressure Manometer, 2psi with Certificate of Traceability to N.I.S.T.
- Measure gauge and differential pressure
- Data Hold momentarily freezes the displayed reading for easy viewing
- Large backlit LCD display
- Zero adjust and Offset functions
- Auto Power Off with disable
$368.49Low Price Guarantee - $20.45SKU: WA005
ELK WA005 Cell Ant Extender Cable, 22.96 Feet
- Cell Ant Extender Cable, RG58U x 7m
- SMA Male to SMA Female
$20.45Low Price Guarantee - $28.88SKU: MX-CBL-MU-EN-AB-05
Mobotix MX-CBL-MU-EN-AB-05 USB Device Cable For M/Q/T25, 0.5m
- USB Device Cable For M/Q/T25, 0.5 m
$28.88Low Price Guarantee - $22.14SKU: 31-0079-MP
Adams Rite 31-0079-MP Screw Set 1/4 - 20 X 3/8 Multi-Pack
- Screw Set 1/4 - 20 X 3/8 Multi-Pack
$22.14Low Price Guarantee - $0.35$0.35Low Price Guarantee
- $111.60SKU: MS1880-03-121
Adams Rite MS1880-03-121 Two-Point Flushbolt with Hourglass Shaped Turn in Dark Bronze Anodized
- Dark Bronze Finish
- Cylinder height: 39-1/16" to 43"
- Hourglass shaped turn for firmer finger grip
- Red background indicator has aluminum letters reading "LOCKED" (no message shown when unlocked)
- Cannot be unlocked when pivoted bolt is in locked position
$111.60Low Price Guarantee - $70.80SKU: PIOC-0200
ACTi PIOC-0200 USB to RS-232 Serial Converter Cable
- Support the RS232 Serial interface
- Full compliance with the USB Specification
- Up to 230Kbps data transfer rate
- Works with cellular phones, PDAs, digital cameras, modems or ISDN terminal adapter
$70.80Low Price Guarantee - $369.81SKU: 82221550C
Aiphone 82221550C 15 Conductor, 22AWG, Shielded Wire, 500 Feet
- Length -500' Pull-Out Box
- Adds one year to the standard Aiphone warranty
- Equipment and wire from a single source
- Wire has been tested with its corresponding system to assure the best quality performance
- UL tested
$369.81Low Price Guarantee - $20.00SKU: C-HM-HM-10
Kramer C-HM-HM-10 Premium High Speed Male HDMI Cable, 10 Feet
- Quality Performance - Kramer's HDMI cables provide an uncompressed digital link between consumer electronics equipment such as DVD players, set-top boxes and audio/video monitors such as LCD or OLED display screens for high-definition TVs
- Max. Resolution - 4K@60Hz (4:4:4)
- High-Quality Connectors - 24K gold-plated connectors resist corrosion, and offer the best possible connectivity
- K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a non-slip connection
- Length - 10 Feet
$20.00Low Price Guarantee - $56.88$56.88Low Price Guarantee
- $1,328.92SKU: CAB-DPX-100
Linear CAB-DPX-100 DisplayPort Extreme Hybrid Optical Cable (Male-Male) - 100 Feet
- 1x DisplayPort Male Connector
- 1x DisplayPort Female Connector
- Extends Cable Length by 100'
$1,328.92Low Price Guarantee - $53.52SKU: 12516C
Platinum Tools 12516C Tele-TitanXg 2.0 Crimp Tool Clamshell
- One tool does the job of two tools
- Improve efficiencies by not having to change out tools in the middle of your termination
- Straight action crimp achieved with minimal hand force
- Compact and rugged design
- Terminates to industry specified crimp heights
- Gun-style lock for secure closure
$53.52Low Price Guarantee - $109.44SKU: NBES0302
APC NBES0302 Wired, Sensor, NetBotz, Door Switch Sensor, 50 Feet
- Monitor and receive access alerts to a rack or room
- Wired universal sensor with 50' cable length and RJ-45 connection
- Compatible with NetBotz 250A, 750 and 755 appliances
- 2 year standard hardware warranty for repair or replacement
$109.44Low Price Guarantee - $105.80SKU: 100061C
Platinum Tools 100061C EXO Crimp Frame with EXO-EX Die, Clamshell
- Single cycle crimp and flush trim
- EXO Die is easily interchangeable
- Reversible EXO Die for ambidextrous operation
- Connectors lock into tool for correct positioning during crimp
- Push button lock for easy storage
$105.80Low Price Guarantee - $67.21SKU: AL-18-2ST-1000CCA
Security Dynamics AL-18-2ST-1000CCA Alarm Wire 18/2 Stranded 1000 ' CCA White Pull Box
- 18 AWG, 2-conductor stranded construction for flexibility and ease of installation
- Copper Clad Aluminum (CCA) conductor — cost-effective alternative for alarm and low-voltage wiring applications
- 1,000 feet supplied in a pull box for tangle-free, efficient cable pulls
- White jacket for standard installation in residential and commercial security systems
- Suitable for connecting motion detectors, door and window contacts, sirens, keypads, and other alarm devices
$67.21Low Price Guarantee
Installation Tools & Supplies Frequently Asked Questions
What tools do I need to install a surveillance camera?
To install a surveillance camera, you'll typically need a drill, screwdriver, and various installation tools like cable strippers and crimpers. Additionally, having a level and measuring tape can help ensure proper placement. Depending on the type of camera, you may also need specific cables, connectors, and mounting hardware, which are often included in the camera kit.
How do I choose the right cable for my surveillance system?
The right cable for a surveillance system depends on the camera type and distance from the recording device. Common options include coaxial cables for analog cameras and Ethernet cables for IP cameras. Ensure the cable is compatible with your system's specifications, such as gauge and shielding type, to maintain video quality and prevent interference.
What is the purpose of a keystone jack in surveillance installation?
A keystone jack is used to connect cables in a structured wiring system, providing a secure and organized way to connect surveillance cameras to networking equipment. It allows for easy insertion and removal of cables, facilitating maintenance and upgrades. Using keystone jacks can help manage cable clutter and improve the overall aesthetics of your installation.
Do I need special tools for terminating alarm wire?
Yes, terminating alarm wire requires specific tools, such as a wire stripper, crimper, and possibly a punch-down tool for connecting wires to terminals. These tools ensure proper connections and minimize signal loss, which is crucial for the reliability of your alarm system. Using the right tools can also prevent damage to the wires during the termination process.
What should I consider when selecting installation supplies for my surveillance system?
When selecting installation supplies, consider the type of surveillance system, the environment (indoor or outdoor), and the distance between components. Look for high-quality cables, connectors, and tools that match the specifications of your cameras and recording devices. Additionally, ensure that the supplies are compatible with the installation location to avoid issues like signal loss or physical damage.




















