Installation Tools & Supplies
- $1.60SKU: CW1510-H
ENS CW1510-H Raceway Connector, 15 x 10mm, Rectangular
- Raceway connector, 15 × 10mm, rectangular; joins two CW1510 raceway sections end-to-end in a straight line
- Used at straight-line joints between two 5-foot CW1510 raceway sections — the connector bridges the gap between sections, maintaining a continuous enclosed channel and preventing the cable from being exposed at the joint
- Essential for installations where the total cable run exceeds 5 feet and multiple CW1510 sections must be chained end-to-end; provides a professional, seamless joint between sections
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC; one connector required per junction between raceway sections
$1.60Low Price Guarantee - $1.60SKU: CW1510-C
ENS CW1510-C Raceway External Bend, 15 x 10mm, Rectangular
- External (outside corner) 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a clean 90° directional transition at outside wall corners and protruding edges
- Used when the raceway travels along a wall face and must turn outward around an outside corner — such as at the corner of a building, a pillar, or a protruding wall section
- Pre-molded external bend eliminates the need to cut miter angles in raceway sections at outside corners; ensures consistent, professional fitting at every outside corner
$1.60Low Price Guarantee - $1.60SKU: CW1510-B
ENS CW1510-B Raceway Internal Bend, 15 x 10mm, Rectangular
- Internal (inside corner) 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a clean 90° directional transition at inside wall corners
- Eliminates the need to cut, miter, or bend raceway sections to navigate inside corners; the pre-molded bend ensures a consistent, professional fit at every inside corner
- Snaps into the CW1510 base channel ends at the corner; the raceway cover sections abut the bend fitting for a continuous, sealed appearance
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC; pair with CW1510-C (external bend) for outside corners
$1.60Low Price Guarantee - $1.60SKU: CW1510-A
ENS CW1510-A Raceway End Cap, 15 x 10mm, Rectangular
- End cap for CW1510 15 × 10mm rectangular cable raceway; covers and seals the open terminal ends of a CW1510 raceway run
- Provides a professional, finished appearance at each raceway termination point — without end caps, the open ends of raceway sections expose the cable inside and leave unfinished cut edges visible at the wall
- Snaps onto the terminal end of the CW1510 raceway base and cover; no adhesive or fasteners required in most installations
- Sized specifically for the 15 × 10mm CW1510 profile — not interchangeable with CW2516-A or CW4016-A end caps
$1.60Low Price Guarantee - $12.00SKU: CW1510
ENS CW1510 Raceway Cord Cover, 5 Feet with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 15mm wide × 10mm tall (approximately 0.59" W × 0.39" H); 5-foot section with adhesive backing for tool-free wall mounting
- Adhesive backing on the raceway base allows quick, tool-free mounting to flat wall surfaces without drilling; for additional security, the raceway base can also be screwed to the wall through pre-drilled mounting holes
- Hinged or snap-on cover (depending on design variant) allows the cable to be laid into the base channel and the cover snapped closed — no need to thread the cable through; cables can be added or removed after installation without removing the raceway
$12.00Low Price Guarantee - $14.00SKU: CT-8W-100H
ENS CT-8W-100H Zip Tie with Screw Hole, White, 8 Inch 100 Pack 4.5mm
- White nylon zip tie with integrated screw hole in the head; length: 8 inches; cable tie width: 4.5mm; 100-pack
- Dual function: the screw hole in the cable tie head allows the tie to be mechanically anchored to a wall, conduit, raceway, or frame via a single screw — eliminating the need for a separate adhesive-backed cable tie mount
- Screw-mount anchor provides a far more reliable and permanent cable bundle anchor than adhesive mounts, which can debond in warm environments, high humidity, or on surfaces that cannot accept adhesive
- White color for clean, professional installations on white-painted walls, ceilings, and conduit where black cable ties would be visually conspicuous
$14.00Low Price Guarantee - $143.00SKU: SPP-C1200M
Hanwha Vision SPP-C1200M RJ45-M12 Cable Compatible with XNF-A9014RV, XNF-A8014RV (Pack of 5)
- Color: Black
- Dimensions: Ø640mm(25.19”) / 42g(0.09lb)
- Supported products: XNF-A9014RV, XNF-A8014RV
$143.00Low Price Guarantee - $101.50SKU: SCL-250
Hanwha Vision SCL-250 Extension Cable for Remote head Lens, 25m (82Ft)
- Product dimensions / weight : 25m * 1ea
- Supported products : PNM-C20000QB
$101.50Low Price Guarantee - $77.99SKU: SPP-C12100P
Hanwha Vision SPP-C12100P M12 Power Cable 10 Meter
- Color : Black
- Material : (Contact carriers) Plastic, PBT GF / (Seal) Plastic, FPM/FKM
- Protect against dust, moisture and vibration
- Length : 10M (32.8ft)
$77.99Low Price Guarantee
Installation Tools & Supplies Frequently Asked Questions
What tools do I need to install a surveillance camera?
To install a surveillance camera, you'll typically need a drill, screwdriver, and various installation tools like cable strippers and crimpers. Additionally, having a level and measuring tape can help ensure proper placement. Depending on the type of camera, you may also need specific cables, connectors, and mounting hardware, which are often included in the camera kit.
How do I choose the right cable for my surveillance system?
The right cable for a surveillance system depends on the camera type and distance from the recording device. Common options include coaxial cables for analog cameras and Ethernet cables for IP cameras. Ensure the cable is compatible with your system's specifications, such as gauge and shielding type, to maintain video quality and prevent interference.
What is the purpose of a keystone jack in surveillance installation?
A keystone jack is used to connect cables in a structured wiring system, providing a secure and organized way to connect surveillance cameras to networking equipment. It allows for easy insertion and removal of cables, facilitating maintenance and upgrades. Using keystone jacks can help manage cable clutter and improve the overall aesthetics of your installation.
Do I need special tools for terminating alarm wire?
Yes, terminating alarm wire requires specific tools, such as a wire stripper, crimper, and possibly a punch-down tool for connecting wires to terminals. These tools ensure proper connections and minimize signal loss, which is crucial for the reliability of your alarm system. Using the right tools can also prevent damage to the wires during the termination process.
What should I consider when selecting installation supplies for my surveillance system?
When selecting installation supplies, consider the type of surveillance system, the environment (indoor or outdoor), and the distance between components. Look for high-quality cables, connectors, and tools that match the specifications of your cameras and recording devices. Additionally, ensure that the supplies are compatible with the installation location to avoid issues like signal loss or physical damage.
Filter
Shopping Options
