Installation Tools & Supplies
- $5.99SKU: CT-6W-100
ENS CT-6W-100 Zip Tie White 6 Inch 3.6mm, 100 Pieces
- White color: blends with white alarm wire, white Cat6, white coaxial cable jackets, and white-painted interior spaces; minimally visible in finished residential and commercial installations
- Same dimensions and strap strength as the black CT-6B-100 — only the color differs; 6-inch length for standard 2–4 cable bundles
- 100-piece pack; for screw-hole mount capability in white
$5.99Low Price Guarantee - $9.50SKU: CT-6B-100H
ENS CT-6B-100H Zip Tie with Screw Hole, Black, 6 Inch 3.5mm, 100 Pieces
- Screw hole enables secure mechanical anchoring to walls, studs, conduit, and equipment frames with a single screw before tying the cable bundle — eliminates adhesive mount reliability concerns in warm, humid, or outdoor installations
- 6-inch length covers the standard cable bundle diameters encountered in typical security system installations; 100-piece pack for high-volume use during multi-camera installations
- Black UV-resistant nylon for indoor and outdoor use; for white screw-hole ties
$9.50Low Price Guarantee - $4.70SKU: CT-6B-100
ENS CT-6B-100 Zip Tie Black 6 Inch 3.6mm, 100 Pieces
- The most versatile and widely used zip tie size in security system installation — long enough to bundle typical 2–4 cable groups (coaxial + Cat6, or power + data) and narrow enough to fit in tight spaces within enclosures and behind panels
- Black UV-resistant nylon: suitable for indoor and outdoor use; black color blends with dark cables and dark equipment surfaces
- 100-piece pack: the higher piece count for the smaller 6-inch tie reflects the higher usage rate of smaller ties in typical installations compared to longer 12-inch ties
$4.70Low Price Guarantee - $24.00SKU: CT-12W-50H
ENS CT-12W-50H Zip Tie with Screw Hole, White, 12 Inch 7.6mm, 50 Pieces
- White nylon cable tie with integrated screw hole in the head; 12-inch (305mm) length; 7.6mm strap width; 50-piece pack
- Screw hole enables mechanical anchoring to any surface before cable bundle is tied — the most reliable cable anchoring method for permanent installations, eliminating adhesive mount failure risk
- White color for minimal visual impact on white walls, white raceway, and light-colored cable installations in finished residential and commercial spaces
$24.00Low Price Guarantee - $12.00SKU: CT-12W-50
ENS CT-12W-50 Zip Tie White 12 Inch 7.8mm, 50 Pieces
- White color: less conspicuous than black cable ties on white or light-colored cables (white alarm wire, white Cat6, white coaxial jacket) and in white raceway or light-colored cable tray installations
- 12-inch length and 7.8mm strap width provide the holding strength for large cable bundles, conduit bundling, and heavy cable group management; same specifications as CT-12B-50 in white
- For screw-hole mounting capability in white
$12.00Low Price Guarantee - $24.00SKU: CT-12B-50H
ENS CT-12B-50H Zip Tie with Screw Hole, Black, 12 Inch 7.6mm, 50 Pieces
- Screw hole in head: allows the cable tie to be anchored to walls, panels, conduit, and equipment frames with a single screw before tying the cable bundle — eliminates the need for separate adhesive cable tie mounts that can fail in warm or humid environments
- 12-inch length for large cable bundles; screw mount combined with 12-inch length creates a permanent, heavy-duty cable anchoring point capable of securing large, heavy cable groups
- Black UV-resistant nylon; suitable for indoor and outdoor anchor applications; for the same length without the screw hole
$24.00Low Price Guarantee - $12.00SKU: CT-12B-50
ENS CT-12B-50 Zip Tie Black 12 Inch 7.8mm, 50 Pieces
- 12-inch length accommodates large cable bundle diameters and provides long enough tail for easy cinching around large conduit, cable trays, and large multi-cable bundles
- 7.8mm strap width: the widest strap in the ENS CT zip tie lineup — provides the highest tensile strength and the widest load distribution across the cable bundle, reducing the risk of cable jacket damage under tension
- Black UV-resistant nylon: suitable for both indoor and outdoor installations; black coloring retards UV degradation for outdoor use on exterior cable bundles, conduit ties, and equipment mounting
- For shorter runs and smaller bundles
$12.00Low Price Guarantee - $72.00SKU: CS34-50B
ENS CS34-50B Cable Sleeve, 3/4" (19mm) 50 Feet, Black
- Expandable braided cable sleeve; 3/4" (19mm) nominal diameter; 50-foot roll; black braided polyester construction
- 3/4" (19mm) diameter: correctly sized for small cable bundles of 2–4 cables — a typical single-camera run with one coaxial and one power cable, or two Cat6 cables bundled together
- Expandable braid allows the sleeve to flex open for lateral insertion of cables on existing runs, then contracts snugly around the bundle; can be cut to any length without fraying
$72.00Low Price Guarantee - $204.00SKU: CS32-50B
ENS CS32-50B Cable Sleeve, 1.5" (38mm) 50 Feet, Black
- Expandable braided cable sleeve; 1.5" (38mm) nominal diameter; 50-foot roll; black braided polyester construction
- Expandable braid construction: the sleeve expands to allow cable bundles to be inserted from the side (for existing cable runs) or threaded from the end, then contracts snugly around the bundle — no need to disconnect cable ends to install
- 1.5" (38mm) diameter: the larger-diameter sleeve for large cable bundles — accommodates groups of 4–10 or more cables depending on individual cable diameters; correct for main cable trunk runs, equipment rack dressing, and multi-cable drops
- Black color: professional appearance in exposed cable management applications, equipment racks
$204.00Low Price Guarantee
Installation Tools & Supplies Frequently Asked Questions
What tools do I need to install a surveillance camera?
To install a surveillance camera, you'll typically need a drill, screwdriver, and various installation tools like cable strippers and crimpers. Additionally, having a level and measuring tape can help ensure proper placement. Depending on the type of camera, you may also need specific cables, connectors, and mounting hardware, which are often included in the camera kit.
How do I choose the right cable for my surveillance system?
The right cable for a surveillance system depends on the camera type and distance from the recording device. Common options include coaxial cables for analog cameras and Ethernet cables for IP cameras. Ensure the cable is compatible with your system's specifications, such as gauge and shielding type, to maintain video quality and prevent interference.
What is the purpose of a keystone jack in surveillance installation?
A keystone jack is used to connect cables in a structured wiring system, providing a secure and organized way to connect surveillance cameras to networking equipment. It allows for easy insertion and removal of cables, facilitating maintenance and upgrades. Using keystone jacks can help manage cable clutter and improve the overall aesthetics of your installation.
Do I need special tools for terminating alarm wire?
Yes, terminating alarm wire requires specific tools, such as a wire stripper, crimper, and possibly a punch-down tool for connecting wires to terminals. These tools ensure proper connections and minimize signal loss, which is crucial for the reliability of your alarm system. Using the right tools can also prevent damage to the wires during the termination process.
What should I consider when selecting installation supplies for my surveillance system?
When selecting installation supplies, consider the type of surveillance system, the environment (indoor or outdoor), and the distance between components. Look for high-quality cables, connectors, and tools that match the specifications of your cameras and recording devices. Additionally, ensure that the supplies are compatible with the installation location to avoid issues like signal loss or physical damage.
Filter
Shopping Options
