Hardware
- $3.75SKU: S227-08R22-119
Adams Rite S227-08R22-119 Screw Flat Head #8-32 x 1-3/8" Phillips
- Screw Flat Head #8-32 x 1-3/8" Phillips
$3.75Low Price Guarantee - $48.34SKU: ICCMSJHW22
ICC ICCMSJHW22 J-Hook with Bat Wing, 3/4in, 25 Pack
- J-hook with bat wing, 3/4in, 25 pack
$48.34Low Price Guarantee - was $49.34 Special Price $47.75was $49.34 Special Price $47.75Low Price Guarantee
- $48.25SKU: ICCMSJHK44
ICC ICCMSJHK44 J-Hook, 2", 25 Pack
- Designed from high quality galvanized steel for strength and durability
- Accommodates CAT 5e, CAT 6, CAT 6a, coax, fiber, and conduit
- Rust resistant zinc finish
- Complies with TIA/EIA requirements for structured cabling systems
- Cost effective alternative to expensive cable tray or ladder rack runway
$48.25Low Price Guarantee - $19.42SKU: 2616-581
DoorKing 2616-581 Nut Barrel Type 08-32 Thread Stainless Steel
- Type:Â Nut Barrel - Specifically designed as a nut barrel type, enhancing security and performance in fastening applications
- Thread Size:Â 08-32 Thd - Standard thread size offering compatibility with a variety of fitting options for versatile usage
- Material:Â Stainless Steel - Constructed from high-quality stainless steel for exceptional corrosion resistance and extended product life
- Durability:Â High Strength - Engineered to withstand heavy loads and intense conditions, ensuring reliability over time
- Installation:Â Easy to Install - Designed for quick and straightforward installation procedures, making it user-friendly
$19.42Low Price Guarantee - $90.00SKU: 10180008
HES 10180008 J-613E Faceplate for 1006 Series in Bronze Toned Finish Use with Corbin Russwin Security Bolt
- Bronze Toned Finish
- Stainless Steel material
- It is recommended for use with cylindrical locksets up to 3/4" throw and all locksets with center-lined bolts
- ANSI/BHMA Numbers: #E09321, #E09322, #E09323
- Dimensions: 4-7/8" x 1-1/4"
$90.00Low Price Guarantee - $108.53SKU: SP-17-BLUE
GRI SP-17-BLUE Wallplate, Stainless Steel
- GRI SP-17: single-gang stainless steel remote station plate equipped with a panic button with momentary action and a guard ring; also available in white plastic
- Blue button: the blue color provides a visible and intuitively recognizable activation surface in low-light environments or locations where a standard red panic button might be confused with other controls; guard ring prevents accidental activation
- Momentary action: the button activates the connected circuit only while pressed and held, then automatically releases — appropriate for standard alarm panel panic zone wiring
$108.53Low Price Guarantee - $2.74SKU: 2600-292
DoorKing 2600-292 Screw Truss Head 8-32 x 3/8
- Truss head profile provides a wide, low-profile bearing surface for secure clamping of sheet metal panels and plastic components
- 8-32 thread provides greater tensile strength and stripping resistance than 6-32 — used in higher-load fastening locations within DoorKing enclosures and housings
- Used in DoorKing gate operator and access control enclosure assemblies
- Genuine DoorKing OEM hardware ensuring correct thread specification and head type
$2.74Low Price Guarantee - $2.86SKU: 2600-288
DoorKing 2600-288 Screw Truss Head Stainless Steel 6-32 x 3/8
- Stainless steel material provides superior corrosion resistance compared to zinc-plated steel fasteners
- Truss head profile provides a wide, low-profile clamping surface suited for thin sheet metal and plastic panel assemblies, distributing clamping load without pull-through
- Used in DoorKing gate operator housings, traffic control systems, and other assemblies where outdoor-rated fasteners are required
- Genuine DoorKing OEM fastener
$2.86Low Price Guarantee - $2.62SKU: 1804-016
DoorKing 1804-012 Screw Truss Head 6-32 x 3/16"
- Truss head profile provides a wide, low-profile clamping surface suited for thin sheet metal, plastic housings, and faceplate assemblies where pull-through resistance is important
- Used in DoorKing telephone entry, access control, and gate operator enclosure assemblies
- Genuine DoorKing OEM hardware ensuring correct thread specification, head type, and material for the intended application
- Small consumable hardware item
$2.62Low Price Guarantee - $2.76SKU: 1804-012
DoorKing 1804-012 Screw Nylon Pan Head 6-32x3/16
- Non-conductive nylon construction provides electrical isolation between the screw and the mounted component or board
- Pan head profile provides a flat bearing surface for secure fastening without cutting into plastic or PCB surfaces
- Used in DoorKing telephone entry and access control system assemblies where non-conductive fastening is required
- Genuine DoorKing OEM hardware ensuring correct material, thread specification, and head type for the specific application
- Small consumable hardware item
$2.76Low Price Guarantee - $2.10SKU: 2616-089
DoorKing 2616-089 Set Screw 1/2-20x1/2"
- 1/2" diameter provides substantially greater holding force than 3/8" set screws
- Fine thread (20 TPI) provides precise depth control and strong vibration resistance
- Headless profile allows the screw to sit flush with or recessed below the component surface, eliminating protrusion hazards on rotating assemblies
- Typically installed with a hex key (Allen key) into a pre-tapped hole in a sprocket hub, collar, or coupling
$2.10Low Price Guarantee - $0.84SKU: 2616-087
DoorKing 2616-087 Set Screw 3/8-24x3/8"
- Headless profile allows the screw to be driven flush with or below the surface of the threaded component, eliminating protrusion that could catch on moving parts
- Used in DoorKing gate operator drive train assemblies to lock sprockets, hubs, or rotating collars to shafts in slide or swing gate operator mechanisms
- Typically installed with a hex key (Allen key) into a pre-tapped hole in the mating component
- Genuine DoorKing OEM fastener
$0.84Low Price Guarantee - $3.40SKU: 2616-047
DoorKing 2616-047 Screw Phillips M2x0.4 6mm
- M2 (2mm diameter) is among the smallest machine screw sizes used in DoorKing electronic assembly — indicates use in precision circuit board or camera module fastening applications
- 0.4mm thread pitch is the standard fine-pitch specification for M2 metric screws
- Phillips cross-head drive for standard #0 or #1 Phillips screwdriver
- Genuine DoorKing OEM fastener used in specific electronic sub-assembly applications
$3.40Low Price Guarantee - $6.30SKU: 2615-833
DoorKing 2615-833 Bolt Hex Socket 9/16-12x2 1/4"
- Internal hex socket drive (Allen key drive) allows installation in tight spaces where a standard open-end or box wrench cannot be positioned
- Cylindrical cap head profile is lower-profile than a standard hex head, reducing clearance requirements in confined assembly areas
- 9/16" diameter provides high tensile and shear strength for structural mounting and assembly applications in DoorKing gate operators and barrier systems
- Genuine DoorKing OEM fastener
$6.30Low Price Guarantee - $13.66SKU: 2615-194
DoorKing 2615-194 Bolt Hex 9/16-12 x 2 1/4"
- Coarse thread (12 TPI) provides robust thread engagement suited for structural assemblies
- 9/16" bolt diameter provides high tensile and shear strength for structural gate operator and barrier mounting applications
- Standard hex head for installation with appropriate wrench or socket
- Genuine DoorKing OEM structural fastener
$13.66Low Price Guarantee - $14.18SKU: 2615-028
DoorKing 2615-028 Bolt Hex Head 3/4-16 x 2"
- Fine thread (16 TPI) provides greater thread engagement per turn and higher clamping force than coarse thread variants of the same diameter — preferred in high-vibration or precision-torque structural applications
- 3/4" bolt diameter indicates a heavy structural fastener application, likely in gate operator base mounts, barrier pivot assemblies, or structural anchorage hardware
- Hex head profile for standard wrench or socket installation
- Genuine DoorKing OEM fastener
$14.18Low Price Guarantee - $15.77SKU: SC544
Alarm Lock SC544 4 Pack of Extended Screws with Adjustable Lengths (Must order 4)
- Installable in minutes
- Come in styles to fit any door or exit trim
- BHMA Grade 1 Commercial
- Quantity: 4
$15.77Low Price Guarantee - $4.00$4.00Low Price Guarantee
- $2.00$2.00Low Price Guarantee
Filter
Shopping Options
