Page 2 | Hardware - Installation Tools & Supplies

$2.10

SKU: 2616-089

DoorKing 2616-089 Set Screw 1/2-20x1/2"

1/2" diameter provides substantially greater holding force than 3/8" set screws
Fine thread (20 TPI) provides precise depth control and strong vibration resistance
Headless profile allows the screw to sit flush with or recessed below the component surface, eliminating protrusion hazards on rotating assemblies
Typically installed with a hex key (Allen key) into a pre-tapped hole in a sprocket hub, collar, or coupling

$2.10

Low Price Guarantee

$0.84

SKU: 2616-087

DoorKing 2616-087 Set Screw 3/8-24x3/8"

Headless profile allows the screw to be driven flush with or below the surface of the threaded component, eliminating protrusion that could catch on moving parts
Used in DoorKing gate operator drive train assemblies to lock sprockets, hubs, or rotating collars to shafts in slide or swing gate operator mechanisms
Typically installed with a hex key (Allen key) into a pre-tapped hole in the mating component
Genuine DoorKing OEM fastener

$0.84

Low Price Guarantee

$3.40

SKU: 2616-047

DoorKing 2616-047 Screw Phillips M2x0.4 6mm

M2 (2mm diameter) is among the smallest machine screw sizes used in DoorKing electronic assembly — indicates use in precision circuit board or camera module fastening applications
0.4mm thread pitch is the standard fine-pitch specification for M2 metric screws
Phillips cross-head drive for standard #0 or #1 Phillips screwdriver
Genuine DoorKing OEM fastener used in specific electronic sub-assembly applications

$3.40

Low Price Guarantee

$6.30

SKU: 2615-833

DoorKing 2615-833 Bolt Hex Socket 9/16-12x2 1/4"

Internal hex socket drive (Allen key drive) allows installation in tight spaces where a standard open-end or box wrench cannot be positioned
Cylindrical cap head profile is lower-profile than a standard hex head, reducing clearance requirements in confined assembly areas
9/16" diameter provides high tensile and shear strength for structural mounting and assembly applications in DoorKing gate operators and barrier systems
Genuine DoorKing OEM fastener

$6.30

Low Price Guarantee

$13.66

SKU: 2615-194

DoorKing 2615-194 Bolt Hex 9/16-12 x 2 1/4"

Coarse thread (12 TPI) provides robust thread engagement suited for structural assemblies
9/16" bolt diameter provides high tensile and shear strength for structural gate operator and barrier mounting applications
Standard hex head for installation with appropriate wrench or socket
Genuine DoorKing OEM structural fastener

$13.66

Low Price Guarantee

$14.18

SKU: 2615-028

DoorKing 2615-028 Bolt Hex Head 3/4-16 x 2"

Fine thread (16 TPI) provides greater thread engagement per turn and higher clamping force than coarse thread variants of the same diameter — preferred in high-vibration or precision-torque structural applications
3/4" bolt diameter indicates a heavy structural fastener application, likely in gate operator base mounts, barrier pivot assemblies, or structural anchorage hardware
Hex head profile for standard wrench or socket installation
Genuine DoorKing OEM fastener

$14.18

Low Price Guarantee