Pelco G35H2-2PJR3AK ImagePak High Resolution WDR 3-8.5mm IR SuS Mount

The Pelco G35H2-2PJR3AK ImagePak Consists of the following Pelco models: EH3512-2HD, C20-DW-6, 13VDIR3-8.5, EM1450, SS3512.

The C20-DW-6 is Pelco’s full-featured digital day/night wide dynamic range (WDR) CCD camera. Its WDR technology provides 120 dB dynamic range and produces superior images over a range of lighting conditions, including extreme backlight conditions. Its day/night technology provides outstanding performance in low lighting conditions. The camera uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change and as the need for infrared sensitivity is realized. The C20-DW-6 is equipped with configurable alarm in and alarm out functions for external devices such as IR lighting control, wiper operation, and local alerting upon alarm of an external device.

The purpose of Pelco’s 13VDIR3-8.5 is to compensate for the focus shift that results from the different wavelengths of visible and IR light. IR orrected lens focus light energy on the same plane. The result is better focus, sharper contrast, and better overall image quality. IR corrected lenseare particularly of benefit to Pelco’s day/night cameras, which “see” both visible and IR light. IR corrected lens allow a camera’s imager to take in visible and IR illumination in “night” conditions (when the IR cut filter is not deployed), while eliminating the problem of IR focus shift.

The EM1450 is a light duty wall mount designed specifically for use with Pelco’s EH3500 Series enclosures. Manufactured from die-cast aluminum, the EM1450 is capable of supporting a maximum load of 9 kg (20 lb) and can be safely mounted to any vertical load-bearing surface. The EM1450 features a small adjustable mounting head that is unobtrusive and provides ample clearance between the cable feedthrough glands and the mounting head. The EM1450 can also be adapted for pole mount applications when used with our PA101 adapter.

The SS3512 is a quality sun shield from Pelco that is designed to be used for the EH3512L and EH3512 series only.

The Pelco EH3512-2HD is a Camera Enclosure, which comes with a small, compact design, is ideally meant for small-to-medium cameras with fixed focal length lenses or motorized zoom lenses (with or without auto iris operation). Constructed with die cast and extruded aluminum which is light-weighted, the enclosure is protected against corrosion.

C20-DW-6 Analog Camera Features

• Wide Dynamic Range
• 650 TV Lines
• High Sensitivity
• Day/Night with Automatic or Manual Control
• 1/3-Inch Format CCD Imager
• Digital Signal Processing
• CS Lens Mount
• Autosensing DC Drive Auto Iris
• Automatic/Manual White Balance Settings for Difficult Lighting Situations
• Selectable Automatic Gain Control
• Advanced Backlight Compensation
• Autosensing Power; 18 to 32 VAC/12 VDC with Selectable AC Line Lock/Internal Synchronization (Revision A)
• 3D Digital Noise Reduction (DNR)
• Privacy Zones Built-in Unshielded Twisted Pair (UTP) Output
• Motion Detection
• Camera Titles
• Built-in Coaxitron®, RS-485 Pelco D Protocol

13VDIR3-8.5 Varifocal Lens Features

• 3-8.5 Focal Length
• 2.8X Zoom Ratio
• Designed for All Day/Night and Monochrome Cameras
• Increased Sharpness in Monochrome Mode
• Focuses IR and Visible Light
• Eliminates the Problem of IR Focus Shift
• Auto Iris, Manual Focus, and Zoom

EM1450 Mount Features

• Light Duty Wall Mount
• Maximum Load 9 kg (20 lb)
• For Use with EH3500 Series Enclosures
• Adjustable Head for Mechanical Positioning of the Enclosure
• Can Be Adapted for Pole Mount Applications with Use of PA101 Adapter

SS3512 sun shield Features

• Used for the EH3512L and EH3512 series only

EH3512-2HD Outdoor Enclosure Features

• Compatible with fixed/motorized lens cameras
• Small, contemporary design
• Die-cast and extruded aluminum construction
• Easy access for servicing and installation
• Designed for indoor/outdoor applications
• Forward opening hinged lid
• Cable entry glands and mounting holes on bottom of enclosure
• Rear link-lock latch