Pelco G3512-2PJZ10W Image Pack 650 TVL Box Camera, 10x Lens with EH3512-2, EM1450

Image Pack Consists of the following Pelco models: EH3512-2, C20-DW-6, 13ZD6X10, EM1450.

The C20-DW-6 is an ultra high resolution digital camera with 650 TVL of resolution and 0.13 lux minimum illumination. Camera features include autosensing power; 18 to 32 VAC (Revision A) or 12 VDC with AC line lock or internal synchronization) and automatic gain control (AGC). The C20-DW-6includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to a strong backlight. The C20-DW-6 also uses slow electronic shutter technology to improve the illumination performance for low-light environments. The C20-DW-6 is Pelco’s full-featured digital day/night wide dynamic range (WDR) CCD camera. Its WDR technology provides 120 dB dynamic range and produces superior images over a range of lighting conditions, including extreme backlight conditions. Its day/night technology provides outstanding performance in low lighting conditions. The camera uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change and as the need for infrared sensitivity is realized.

The 13ZD6X10 from Pelco is a 1/3-inch motorized zoom lens cover a wide range of applications from wide angle to telephoto. Each auto iris lens in this 13ZD6X10 covers a specific range of focal lengths and is available with or without preset positioning. Appropriate for indoor and outdoor lighting situations, the 13ZD6X10 Lens will fit all 1/3-inch CS-mount cameras requiring DC-drive auto iris lens. In addition, auto iris lens include a spot filter. A factory-installed, square 4-pin auto iris connector is standard.

The EH3512-2 are outdoor, low cost camera enclosures constructed from die-cast and extruded aluminum. The EH3512-2 has a lower body length of 32.38 cm (12.75 inches) and the EH3512-2 has a lower body length of 40.00 cm (15.75 inches). These enclosures are for use with cameras having fixed focal length lenses or motorized zoom lenses (with or without auto iris operation). The front hinged lid provides easy access to the removable camera sled. Two adjustable glands (PG13.5) on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

The EM1450 is a light duty wall mount designed manufactured from die-cast aluminum, the EM1450 is capable of supporting a maximum load of 9 kg (20 lb) and can be safely mounted to any vertical load-bearing surface. The EM1450 features a small adjustable mounting head that is unobtrusive and provides ample clearance between the cable feedthrough glands and the mounting head. The EM1450 can also be adapted for pole mount applications when used with our PA101 adapter.

C20-DW-6 Features

• Wide Dynamic Range
• 650 TV Lines
• High Sensitivity
• Day/Night with Automatic or Manual Control
• 1/3-Inch Format CCD Imager
• Digital Signal Processing
• CS Lens Mount
• Autosensing DC Drive Auto Iris
• Automatic/Manual White Balance Settings for Difficult Lighting Situations
• Selectable Automatic Gain Control
• Advanced Backlight Compensation
• Autosensing Power; 18 to 32 VAC/12 VDC with Selectable AC Line Lock/Internal Synchronization (Revision A)
• 3D Digital Noise Reduction (DNR)
• Privacy Zones

13ZD6X10 Features

• CS Mount
• Spot Filter
• For Use with 1/3-Inch Format Cameras
• Auto Iris (Direct Drive, No Amplifier), Motorized Focus and Zoom(with or without Presets)
• High Resolution Power in Compact Body

EH3512-2 Features

• Low Cost
• Small, Contemporary Design
• Die-Cast and Extruded Aluminum Construction
• Forward-Opening Hinged Lid
• Rear Link-Lock Latch
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/Outdoor Applications
• Easy Access for Servicing and Installation
• Models Available with Factory-Installed Low Power Heater, Blower and Defroster, or with Heater and Defroster

EM1450 Features

• Light Duty Wall Mount
• Maximum Load 9 kg (20 lb)
• Adjustable Head for Mechanical Positioning of the Enclosure
• Can Be Adapted for Pole Mount Applications with Use of PA101 Adapter