Pelco G3512-0PJV3AK ImagePak High Resolution WDR 3-8mm AI SuS Mount

The Pelco G3512-0PJV3AK ImagePak consists of a Pelco models: EH3512, C20-DW-6, 13VD3-8, EM1450, SS3512.

The EH3512 from Pelco is a indoor/outdoor, low cost camera enclosure constructed from die-cast and extruded aluminum. The EH3512 has a lower body length of 32.38 cm (12.75 inches) The EH3512 enclosure are for use with cameras having fixed focal length lenses or motorized zoom lenses (with or without auto iris operation). The front hinged lid provides easy access to the removable camera sled. Two adjustable glands (PG13.5) on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

The C20-DW-6 from Pelco is an ultra high resolution digital camera with 650 TVL of resolution and 0.13 lux minimum illumination. Camera features include autosensing power; 18 to 32 VAC (Revision A) or 12 VDC with AC line lock or internal synchronization) and automatic gain control (AGC). The C20-DW-6 includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to a strong backlight. The C20-DW-6 Series also uses slow electronic shutter technology to improve the illumination performance for low-light environments.

The 13VD3-8 from Pelco is 1/3-inch, 3 to 8mm varifocal lens Auto iris lense covers a specific range of focal lengths. Adjust these lenses to get the exact field of view instead of & ldquo;almost the right view.” Appropriate for indoor and outdoor lighting situations, the 13VD3-8 lense will fit all 1/3-inch CS-mount cameras requiring DC-drive auto iris lenses. In addition, all auto iris lenses include a spot filter.

The EM1450 from Pelco is Wall Mount, Light-Duty, Enclosure is a light duty wall mount, which supports up to twenty pounds. It was designed specifically to be used with Pelco's EH3500 series of camera enclosures. The EM1450 features a die-cast aluminum arm with a small adjustable head, which allows mechanical positioning and provides enough clearance for cables.

The SS3512 from Pelco is Sun Shroud for EH3512/EH3512L Enclosures protects the camera enclosure from direct sunlight.

EH3512 camera enclosure Features

• Low Cost
• Small, Contemporary Design
• Die-Cast and Extruded Aluminum Construction
• Forward-Opening Hinged Lid
• Rear Link-Lock Latch
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/outdoor Applications
• Easy Access for Servicing and Installation
• Models Available with Factory-Installed Low Power Heater, Blower and Defroster, or with Heater and Defroster

C20-DW-6 from Pelco is an ultra high resolution digital camera Features

• Wide Dynamic Range
• 650 TV Lines
• High Sensitivity
• Day/Night with Automatic or Manual Control
• 1/3-Inch Format CCD Imager
• CS Lens Mount
• Autosensing DC Drive Auto Iris
• Automatic/Manual White Balance Settings for Difficult Lighting Situations
• Selectable Automatic Gain Control
• Advanced Backlight Compensation
• Autosensing Power; 18 to 32 VAC/12 VDC with Selectable
• 3D Digital Noise Reduction (DNR)
• Privacy Zones
• AC Line Lock/Internal Synchronization (Revision A)

13VD3-8 Varifocal Lens Features

• Format Size 1/3-inch
• Mount Type CS
• Focal Length 3 to 8mm
• Zoom Ratio 2.7X
• Aperture (f) 1.0 ~ 360
• Iris Auto (Direct Drive)

EM1450 light duty wall mount Features

• Light Duty Wall Mount
• Maximum Load 9 kg (20 lb)
• For Use with EH3500 Series Enclosures
• Adjustable Head for Mechanical Positioning of the Enclosure
• Can Be Adapted for Pole Mount Applications with Use of
• PA101 Adapter

SS3512 Sun Shroud Features

• For EH3512/EH3512L Enclosures
• Protects the camera enclosure from direct sunlight