Cable Management
- $48.80SKU: 91-0001590
Kramer 91-0001590 Hook and Loop Cable Ties, 50 Pieces
- 50-piece pack of hook-and-loop reusable cable ties; for cable bundling and management in AV racks, cable trays, and installation environments
- Reusable and repositionable: unlike nylon zip ties that must be cut and discarded when cables are rerouted or added, hook-and-loop ties open, reposition, and re-close repeatedly without waste - reducing consumable cost over the life of the installation
- Gentle on cable jackets: the soft hook-and-loop closure does not bite into or crimp cable jacket materials the way tight plastic zip ties can, protecting delicate optical, HDMI, and signal cable constructions
- Correct standard installation supply for Kramer AV system rack builds; 50-piece quantity covers a typical mid-size AV rack cable management requirement
$48.80Low Price Guarantee - $1.13SKU: FMSFTC500W
Wire Trak FMSFTC500W Tamper Resistant Raceway Clip, White
- Tamper-resistant raceway clip; white finish; secures raceway covers and fittings against unauthorized removal
- Requires special tooling (typically a specific screwdriver bit) to release the secured cover — preventing the public or unauthorized personnel from accessing the cables inside the raceway by simply prying off the snap-fit cover
- White finish matches white Wire Trak raceway and fitting color options for a consistent, coordinated installation appearance
- Compatible with the 500 series (1" × 1/2") Wire Trak raceway system
$1.13Low Price Guarantee - $0.45SKU: FEST500100
Wire Trak FEST500100 Spiral Tube, 1/2" Closed Gap Spiral Cut Tubing
- 1/2" diameter closed-gap spiral cut tubing; durable flexible polyethylene blend balances flexibility with structural integrity for larger cable bundles
- Closed-gap spiral design dramatically reduces clutter and wear by minimizing cable escape from the tubing while in use
- Holds its shape around obstacles and equipment, suitable for full-scale industrial wiring applications and larger cable bundle counts than the 1/4" or 3/8" sizes accommodate
$0.45Low Price Guarantee - $0.42SKU: FEST375100
Wire Trak FEST375100 Spiral Tube, 3/8" Closed Gap Spiral Cut Tubing
- 3/8" diameter closed-gap spiral cut tubing; durable flexible polyethylene blend for both flexibility and structural integrity
- Closed-gap spiral design contains cables more securely than open-gap alternatives, reducing clutter and protecting against abrasion wear over time
- Holds its shape while bending around obstacles and corners, accommodating moderate-size cable bundles in home, office, and industrial wiring applications
$0.42Low Price Guarantee - $0.41SKU: FEST125100
Wire Trak FEST125100 Spiral Tube, 1/4" Closed Gap Spiral Cut Tubing
- 1/4" diameter closed-gap spiral cut tubing; durable flexible polyethylene blend balances flexibility with structural integrity
- Closed-gap spiral design minimizes cable escape from the tubing — keeping bundled cables organized and contained more effectively than open-gap spiral wrap alternatives
- Flexible polyethylene material holds its shape while bending around obstacles, corners, and equipment — suitable for home entertainment setups, small electronics bundling, and light-duty industrial wiring
$0.41Low Price Guarantee - $4.20SKU: FEFG26
Wire Trak FEFG26 Flexible Edge Guard, 2.6" Size (PVC Cable Raceway Fitting)
- 2.6" size flexible edge guard; PVC cable raceway fitting; the largest capacity option in the Wire Trak flexible edge guard series
- Flexible construction enables the raceway to navigate corners and curved architectural transitions while maintaining complete cable enclosure for the largest Wire Trak raceway profile
- Matches the dimensional and visual profile of the corresponding largest rigid Wire Trak raceway series for seamless, professional installations
- Correct specification for high-density cable bundle runs in commercial and light industrial applications using the largest available raceway size
$4.20Low Price Guarantee - $4.11SKU: FEFG250
Wire Trak FEFG250 Flexible Edge Guard, 2.50" Size (PVC Cable Raceway Fitting)
- .50" size flexible edge guard; PVC cable raceway fitting compatible with larger Wire Trak raceway series for higher cable bundle capacity
- Maintains matching dimensional and visual profile with corresponding rigid raceway sections at the 2.5" size for a continuous, professional appearance
- Suited for commercial and light industrial installations with larger cable bundle counts requiring the bigger raceway capacity
$4.11Low Price Guarantee - $3.69SKU: FEFG16
Wire Trak FEFG16 Flexible Edge Guard, 1.6" Size (PVC Cable Raceway Fitting)
- 1.6" size flexible edge guard; PVC cable raceway fitting compatible with the Wire Trak raceway system
- Flexible construction enables the raceway to bend around corners and irregular surfaces while maintaining a fully enclosed, continuous cable path
- The 1.6" size provides slightly more internal capacity than the 1.50" FEFG150 — confirm the correct size matches the rigid raceway series being used in the same installation
- Maintains matching dimensional and visual profile with corresponding rigid Wire Trak raceway sections for a seamless, professional appearance
$3.69Low Price Guarantee - $3.69SKU: FEFG150
Wire Trak FEFG150 Flexible Edge Guard, 1.50" Size (PVC Cable Raceway Fitting)
- 1.50" size flexible edge guard; PVC cable raceway fitting designed for compatibility with the Wire Trak raceway product line
- Maintains the same visual and dimensional profile as rigid Wire Trak raceway sections at the matching size, ensuring a clean, consistent appearance throughout the installation
- Compatible with the broader Wire Trak fittings and accessories ecosystem for custom-designed wire management systems
$3.69Low Price Guarantee - $1.52SKU: FE020375SRI8
Wire Trak FE020375SRI8 Surface Raceway 3/4" X 1/2" X 8' Ivory (160' Per Carton)
- 2-piece base-and-cover design with positive locking cover for easy cable loading and a clean, professional finish; ivory color coordinates with light-colored walls, baseboards, and millwork
- 375 series sizing (3/4" × 1/2") for moderate cable bundle capacity; 8-foot lengths packaged in bulk cartons (160 total feet) for efficient job-site supply
- Pre-applied adhesive backing for fast, no-drilling installation directly to walls and other mounting surfaces
- Compatible with the complete line of Wire Trak molded fittings (elbows, tees, end caps) in matching ivory finish for a fully coordinated installation
$1.52Low Price Guarantee - $1.52SKU: FE020375SRB8
Wire Trak FE020375SRB8 Surface Raceway 3/4" X 1/2" X 8' (160' Per Carton – 20 Pieces Per Box)
- 2-piece design: separate base and snap-on cover allows easy cable loading and a clean, finished appearance; positive locking mechanism keeps the cover securely in place
- 375 series sizing (3/4" × 1/2") accommodates moderate cable bundle capacity — the correct size step between the smaller and larger Wire Trak raceway series for typical low-voltage and power cable runs
- 8-foot lengths, 20 pieces per carton (160 total feet) — efficient bulk packaging for contractors and installers running multiple raceway segments across a job site
- Pre-applied adhesive backing enables fast, no-drilling mounting to walls, baseboards, and other flat surfaces;
$1.52Low Price Guarantee - $7.60SKU: CT-8W-100
ENS CT-8W-100 Zip Tie White 8 Inch 4.8mm, 100 Pieces
- 8-inch length handles larger cable bundles and conduit wrap applications where 6-inch ties cannot close; 4.8mm strap width provides adequate holding strength for medium-large cable groups
- White color blends with white cables, white raceway, and finished interior installation surfaces
$7.60Low Price Guarantee - $14.00SKU: CT-8B-100H
ENS CT-8B-100H Zip Tie with Screw Hole, Black, 8 Inch 4.5mm, 100 Pieces
- Screw hole provides mechanical surface anchoring for medium-to-large cable bundles; 8-inch length covers larger bundle circumferences than the 6-inch screw-hole tie, including conduit bundles and 4–6 cable groups
- Black UV-resistant nylon; 100-piece pack for high-volume installation use; for the white variant
$14.00Low Price Guarantee - $7.60SKU: CT-8B-100
ENS CT-8B-100 Zip Tie Black 8 Inch 4.8mm, 100 Pieces
- 8-inch mid-size length and 4.8mm strap width: the correct specification for medium-large cable bundles in equipment racks, grouping 4–6 cables in exposed cable runs, or bundling cables around 3/4" or 1" conduit where 6-inch ties cannot close around the conduit
- Black UV-resistant nylon; suitable for indoor and outdoor use; 100-piece pack
- For smaller bundles
$7.60Low Price Guarantee - $9.50SKU: CT-6W-100H
ENS CT-6W-100H Zip Tie with Screw Hole, White, 6 Inch 3.5mm, 100 Pieces
- Screw mounting hole provides mechanical surface anchoring of the cable bundle without adhesive mounts; white color minimizes visual impact in finished residential and commercial installations
- 6-inch length covers standard installation cable bundle diameters; 100-piece pack for high-volume use
- For the black screw-hole variant
$9.50Low Price Guarantee - $5.99SKU: CT-6W-100
ENS CT-6W-100 Zip Tie White 6 Inch 3.6mm, 100 Pieces
- White color: blends with white alarm wire, white Cat6, white coaxial cable jackets, and white-painted interior spaces; minimally visible in finished residential and commercial installations
- Same dimensions and strap strength as the black CT-6B-100 — only the color differs; 6-inch length for standard 2–4 cable bundles
- 100-piece pack; for screw-hole mount capability in white
$5.99Low Price Guarantee - $9.50SKU: CT-6B-100H
ENS CT-6B-100H Zip Tie with Screw Hole, Black, 6 Inch 3.5mm, 100 Pieces
- Screw hole enables secure mechanical anchoring to walls, studs, conduit, and equipment frames with a single screw before tying the cable bundle — eliminates adhesive mount reliability concerns in warm, humid, or outdoor installations
- 6-inch length covers the standard cable bundle diameters encountered in typical security system installations; 100-piece pack for high-volume use during multi-camera installations
- Black UV-resistant nylon for indoor and outdoor use; for white screw-hole ties
$9.50Low Price Guarantee - $4.70SKU: CT-6B-100
ENS CT-6B-100 Zip Tie Black 6 Inch 3.6mm, 100 Pieces
- The most versatile and widely used zip tie size in security system installation — long enough to bundle typical 2–4 cable groups (coaxial + Cat6, or power + data) and narrow enough to fit in tight spaces within enclosures and behind panels
- Black UV-resistant nylon: suitable for indoor and outdoor use; black color blends with dark cables and dark equipment surfaces
- 100-piece pack: the higher piece count for the smaller 6-inch tie reflects the higher usage rate of smaller ties in typical installations compared to longer 12-inch ties
$4.70Low Price Guarantee - $24.00SKU: CT-12W-50H
ENS CT-12W-50H Zip Tie with Screw Hole, White, 12 Inch 7.6mm, 50 Pieces
- White nylon cable tie with integrated screw hole in the head; 12-inch (305mm) length; 7.6mm strap width; 50-piece pack
- Screw hole enables mechanical anchoring to any surface before cable bundle is tied — the most reliable cable anchoring method for permanent installations, eliminating adhesive mount failure risk
- White color for minimal visual impact on white walls, white raceway, and light-colored cable installations in finished residential and commercial spaces
$24.00Low Price Guarantee - $12.00SKU: CT-12W-50
ENS CT-12W-50 Zip Tie White 12 Inch 7.8mm, 50 Pieces
- White color: less conspicuous than black cable ties on white or light-colored cables (white alarm wire, white Cat6, white coaxial jacket) and in white raceway or light-colored cable tray installations
- 12-inch length and 7.8mm strap width provide the holding strength for large cable bundles, conduit bundling, and heavy cable group management; same specifications as CT-12B-50 in white
- For screw-hole mounting capability in white
$12.00Low Price Guarantee - $24.00SKU: CT-12B-50H
ENS CT-12B-50H Zip Tie with Screw Hole, Black, 12 Inch 7.6mm, 50 Pieces
- Screw hole in head: allows the cable tie to be anchored to walls, panels, conduit, and equipment frames with a single screw before tying the cable bundle — eliminates the need for separate adhesive cable tie mounts that can fail in warm or humid environments
- 12-inch length for large cable bundles; screw mount combined with 12-inch length creates a permanent, heavy-duty cable anchoring point capable of securing large, heavy cable groups
- Black UV-resistant nylon; suitable for indoor and outdoor anchor applications; for the same length without the screw hole
$24.00Low Price Guarantee - $12.00SKU: CT-12B-50
ENS CT-12B-50 Zip Tie Black 12 Inch 7.8mm, 50 Pieces
- 12-inch length accommodates large cable bundle diameters and provides long enough tail for easy cinching around large conduit, cable trays, and large multi-cable bundles
- 7.8mm strap width: the widest strap in the ENS CT zip tie lineup — provides the highest tensile strength and the widest load distribution across the cable bundle, reducing the risk of cable jacket damage under tension
- Black UV-resistant nylon: suitable for both indoor and outdoor installations; black coloring retards UV degradation for outdoor use on exterior cable bundles, conduit ties, and equipment mounting
- For shorter runs and smaller bundles
$12.00Low Price Guarantee - $72.00SKU: CS34-50B
ENS CS34-50B Cable Sleeve, 3/4" (19mm) 50 Feet, Black
- Expandable braided cable sleeve; 3/4" (19mm) nominal diameter; 50-foot roll; black braided polyester construction
- 3/4" (19mm) diameter: correctly sized for small cable bundles of 2–4 cables — a typical single-camera run with one coaxial and one power cable, or two Cat6 cables bundled together
- Expandable braid allows the sleeve to flex open for lateral insertion of cables on existing runs, then contracts snugly around the bundle; can be cut to any length without fraying
$72.00Low Price Guarantee - $204.00SKU: CS32-50B
ENS CS32-50B Cable Sleeve, 1.5" (38mm) 50 Feet, Black
- Expandable braided cable sleeve; 1.5" (38mm) nominal diameter; 50-foot roll; black braided polyester construction
- Expandable braid construction: the sleeve expands to allow cable bundles to be inserted from the side (for existing cable runs) or threaded from the end, then contracts snugly around the bundle — no need to disconnect cable ends to install
- 1.5" (38mm) diameter: the larger-diameter sleeve for large cable bundles — accommodates groups of 4–10 or more cables depending on individual cable diameters; correct for main cable trunk runs, equipment rack dressing, and multi-cable drops
- Black color: professional appearance in exposed cable management applications, equipment racks
$204.00Low Price Guarantee - $3.50SKU: CJ0201-S
ENS CJ0201-S J Hook 110.74 x 35.31 x 32mm
- Small J hook cable support; dimensions: 110.74mm (approximately 4.4") wide × 35.31mm (approximately 1.4") deep × 32mm (approximately 1.3") tall
- Small hook profile suited for single-cable or two-cable branch runs — the tail drops from a main above-ceiling trunk route to individual cameras, access control readers, or access points
- J saddle profile supports cables without crushing or excessive bending; the smallest profile in the CJ0201 series provides minimal visual impact at tight spacing intervals in above-ceiling installations
$3.50Low Price Guarantee - $4.10SKU: CJ0201-M
ENS CJ0201-M J Hook 123 x 67 x 33mm
- Medium J hook cable support; dimensions: 123mm (approximately 4.8") wide × 67mm (approximately 2.6") deep × 33mm (approximately 1.3") tall
- The medium hook width suits typical 3–6 cable bundle runs — the standard bundle size for a few Cat6 cables or a mix of Cat6 and coaxial cables routed together from a camera cluster to a central distribution point
- J saddle profile supports cables without pinching, crushing, or exceeding minimum bend radius; installs on hanger wire, beam flange, or ceiling grid support wire
$4.10Low Price Guarantee - $8.70SKU: CJ0201-L
ENS CJ0201-L J Hook 177.8 x 101.6 x 50.8mm
- Large J hook cable support; dimensions: 177.8mm (7") wide × 101.6mm (4") deep × 50.8mm (2") tall; for routing and supporting large bundles of low-voltage cables in above-ceiling and structural spaces
- The large 177.8mm width accommodates wide cable bundles — multiple Cat6, coaxial, and alarm cable runs grouped together in a single above-ceiling cable support — reducing the number of hooks required per linear foot of cable route
- J hook saddle profile: cables rest in the J-shaped trough without being pinched, crushed, or bent beyond their minimum bend radius — maintaining Cat6 performance standards that prohibit excessive bend radius or cable compression
$8.70Low Price Guarantee - $18.00SKU: CCKIT-WH
ENS CCKIT-WH Nail-In Clips Kit, 50 Pieces CC8S-WH, 20 Pieces CC16D-WH, 20 Pieces CC24D-WH
- Nail-in clips kit: 50 × CC8S-WH (8mm single, white), 20 × CC16D-WH (16mm dual, white), 20 × CC24D-WH (24mm dual, white); 90 clips total in assorted sizes for complete security cable runs
- All clips in white for clean, inconspicuous installation on white baseboards, door frames, and wall surfaces; all nail-in fasteners for hammer-drive installation into wood surfaces without separate screws, anchors, or drill
- Saves time during ordering and jobsite preparation — a single kit covers all cable sizes for a typical one- to four-camera installation without carrying three separate bags
- For larger jobs requiring higher clip counts
$18.00Low Price Guarantee - $12.00SKU: CC8S-WH
ENS CC8S-WH Nail-In Clips, 8mm, White, 100-Pack
- Single nail-in cable clip; 8mm cable diameter; white; 100-pack; single cable per clip body
- 8mm diameter: specifically sized for small-diameter low-voltage cables — 22/4 alarm wire, 18/2 speaker wire, thermostat wire, and similarly thin cable types that require a snug-fitting clip to prevent movement and rattling against the surface
- Nail-in fastener for fast hammer-drive installation into wood surfaces without additional tools; the larger 100-pack (vs. 50-pack for larger clips) reflects the higher clip density typically needed for small-wire runs
$12.00Low Price Guarantee - $18.00SKU: CC24D-WH
ENS CC24D-WH Dual Nail-In Clips, 24mm, White, 50-Pack
- Dual nail-in cable clip; 24mm cable diameter; white; 50-pack; accommodates two cables simultaneously
- 24mm clip opening: correct specification for larger-diameter cables (RG6 coax, jacketed Cat6, bundled cable runs) that do not fit within the 16mm CC16D-WH clip; dual body allows two cables side-by-side in one clip
- Nail-in fastener: driven into wood surfaces with a hammer — the fastest cable clip installation method for wood surface runs; no screwdriver, drill, or anchor required
- White color for inconspicuous installation on white baseboards, door frames, and wall surfaces
$18.00Low Price Guarantee - $14.00SKU: CC16D-WH
ENS CC16D-WH Dual Nail-In Clips, 16mm, White, 50-Pack
- Dual nail-in cable clip; 16mm cable diameter; white; 50-pack; accommodates two cables simultaneously in a single clip
- Nail-in fastener: the clip is driven into wood surfaces (baseboards, door frames, wood studs) with a hammer — no drill, screwdriver, or anchor required; fastest installation method for wood surface cable runs
- 16mm diameter: sized for standard RG59 coaxial cable (approximately 6mm OD) in a dual-capacity body, or for a single larger cable up to the clip's internal diameter; confirm cable diameters before ordering
- White color for clean
$14.00Low Price Guarantee - $1.60SKU: CW4016-T
ENS CW4016-T Raceway Equal Tee, Rectangular, 1.57" W × 0.63" H
- Equal tee (T-junction) fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; three equal 40 × 16mm openings for splitting or merging raceway runs at a T-junction
- Used when the CW4016 main cable trunk must branch to serve two directions simultaneously
- All three tee openings are the same 40 × 16mm profile; any port can serve as the incoming trunk and either of the other two as the branch outputs
$1.60Low Price Guarantee - $1.60SKU: CW4016-L
ENS CW4016-L Raceway Flat Bend, Rectangular, 1.57" W × 0.63" H
- Flat 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a 90° directional change within the same plane
- Used for same-plane 90° turns — such as routing the main cable trunk along a baseboard and turning left or right at a room corner while remaining flat against the floor-level wall — distinct from inside corner (CW4016-B) and outside corner (CW4016-C) bend fittings
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-L or CW2516-L fittings
- Pre-molded fitting ensures a consistent, professional 90° flat turn without cutting or bending the raceway sections
$1.60Low Price Guarantee - $94.00SKU: CW4016-KIT
ENS CW4016-KIT Raceway Cord Cover Kit, 3.5 Feet (10 Covers), Connectors & Accessories Included
- Complete CW4016 40 × 16mm raceway kit; 10 × raceway cover sections totaling approximately 3.5 feet; end caps, connectors, and bend fittings included for a complete installation without ordering components separately
- 40 × 16mm profile — the largest in the ENS CW series — accommodates three to four cables simultaneously (multiple CAT5/6 and coaxial cables in a single raceway channel); the correct kit for multi-camera main cable trunk runs
- PVC raceway with adhesive backing; white finish; all included fittings are the same 40 × 16mm profile as the CW4016 covers
- For longer or more complex installations
$94.00Low Price Guarantee - $1.60SKU: CW4016-H
ENS CW4016-H Raceway Connector, Rectangular, 1.57" W × 0.63" H
- In-line connector for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; joins two CW4016 sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW4016 sections — prevents cable from being exposed at the joint between pieces
- Essential for multi-section installations where the total cable run exceeds 5 feet; one connector per joint between raceway sections in a straight run
$1.60Low Price Guarantee - $1.60SKU: CW4016-C
ENS CW4016-C Raceway External Bend, Rectangular, 1.57" W × 0.63" H
- External (outside corner) 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a clean 90° transition at outside wall corners and protruding edges
- Used when the CW4016 raceway must turn around an outside building corner, pillar edge, or other convex 90° surface — routing the cable trunk continuously from one wall face to the adjacent face without any exposed cable
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-C or CW2516-C fittings
- Pair with CW4016-B (internal bend) for inside corners
$1.60Low Price Guarantee - $1.60SKU: CW4016-B
ENS CW4016-B Raceway Internal Bend, Rectangular, 1.57" W × 0.63" H
- Internal (inside corner) 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a clean 90° transition at inside wall corners
- Allows the CW4016 raceway to turn at an inside corner where two walls meet at an interior angle — maintaining the enclosed cable channel across the corner without any cutting or bending of the raceway sections
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-B (15 × 10mm) or CW2516-B (25 × 16mm) fittings
$1.60Low Price Guarantee - $1.60SKU: CW4016-A
ENS CW4016-A Raceway End Cap, Rectangular, 1.57" W × 0.63" H
- End cap for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; covers and seals the open terminal end of a CW4016 raceway run
- The largest end cap in the ENS CW series — sized for the 40mm wide × 16mm tall CW4016 profile; not interchangeable with CW2516-A (0.98" W × 0.63" H) or CW1510-A (15 × 10mm) end caps
- Provides a clean, professional finished appearance at each raceway termination point where cables enter or exit the raceway channel
- Snaps onto the terminal end of the CW4016 base and cover; white PVC; typically two end caps used per independent raceway run
$1.60Low Price Guarantee - $18.00SKU: CW4016
ENS CW4016 Raceway Cord Cover, 5 Feet, 1.57" W × 0.63" H with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 40mm wide × 16mm tall (1.57" W × 0.63" H); 5-foot section with adhesive backing
- Adhesive backing for quick tool-free mounting on flat wall surfaces; can also be screw-mounted through the base for permanent installation; same hinged/snap-on cover design as the CW1510 and CW2516 for easy cable insertion after mounting
- White PVC; pairs with CW4016 series fittings: end caps (CW4016-A) and the complete CW4016 fitting family for corners, connectors, flat bends, and tees
$18.00Low Price Guarantee - $1.60SKU: CW2516-T
ENS CW2516-T Raceway Equal Tee, Rectangular, 0.98" W × 0.63" H
- Raceway equal tee, 0.98" W × 0.63" H, rectangular; three equal 25 × 16mm openings for splitting or merging CW2516 raceway runs at a T-junction
- Used when a cable run must branch from one direction into two perpendicular directions
- All three tee openings are the same 25 × 16mm profile; any port can serve as incoming or outgoing
$1.60Low Price Guarantee - $1.60SKU: CW2516-L
ENS CW2516-L Raceway Flat Bend, Rectangular, 0.98" W × 0.63" H
- Flat 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a 90° directional change within the same plane (horizontal turn along a wall, baseboard, or ceiling)
- Used for same-plane 90° turns — distinct from internal bends (CW2516-B, inside corners) and external bends (CW2516-C, outside corners) which handle vertical-to-horizontal corner transitions
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-L or CW4016-L fittings
$1.60Low Price Guarantee - $78.00SKU: CW2516-KIT
ENS CW2516-KIT Raceway Cord Cover Kit, 3.5 Feet (10 Covers), Connectors & Accessories Included
- Complete CW2516 25 × 16mm raceway kit; 10 × raceway cover sections totaling approximately 3.5 feet; connectors, end caps, and bend fittings included for a complete installation
- 25 × 16mm mid-size profile accommodates two to three cables (e.g., CAT5/6 + coaxial, or multiple CAT5/6) in a single raceway run — more capacity than the CW1510-KIT without requiring the full-width CW4016
- PVC raceway with adhesive backing; white finish; all included fittings are the same 25 × 16mm profile as the CW2516 sections
- For longer or more complex installations
$78.00Low Price Guarantee - $1.60SKU: CW2516-H
ENS CW2516-H Raceway Connector, Rectangular, 0.98" W × 0.63" H
- Raceway connector, 0.98" W × 0.63" H, rectangular; joins two CW2516 25 × 16mm raceway sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW2516 sections — one connector required at each junction between raceway pieces in a straight run
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-H or CW4016-H fittings
- Also used to couple CW2516 sections to end caps, bends, flat bends, and tee fittings
$1.60Low Price Guarantee - $1.60SKU: CW2516-C
ENS CW2516-C Raceway External Bend, Rectangular, 0.98" W × 0.63" H
- External (outside corner) 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a clean 90° transition at outside wall corners and protruding edges
- Used when the CW2516 raceway must navigate around an outside building corner, pillar edge, or other convex 90° surface transition
- Sized for the 25 × 16mm CW2516 profile; white PVC; pair with CW2516-B (internal bend) for inside corners
$1.60Low Price Guarantee - $1.60SKU: CW2516-B
ENS CW2516-B Raceway Internal Bend, Rectangular, 0.98" W × 0.63" H
- Internal (inside corner) 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a clean 90° transition at inside wall corners
- Allows the CW2516 raceway to turn at an inside corner where two walls meet at an interior angle without cutting or bending the raceway channel
- Sized for the 25 × 16mm CW2516 profile; white PVC; pair with CW2516-C (external bend) for outside corners and CW2516-L (flat bend) for same-plane 90° turns
$1.60Low Price Guarantee - $1.60SKU: CW2516-A
ENS CW2516-A Raceway End Cap, Rectangular, 0.98" W × 0.63" H
- End cap for CW2516 25 × 16mm (0.98" W × 0.63" H) rectangular cable raceway; covers the open terminal end of a CW2516 raceway run at each cable entry or exit point
- Provides a clean, professional finished appearance at raceway termination points — exposed open ends leave cut edges visible and the cable inside the raceway unprotected at the termination
- Snaps onto the terminal end of the CW2516 raceway base and cover; white PVC; sized specifically for the 25 × 16mm CW2516 profile
$1.60Low Price Guarantee - $16.00SKU: CW2516
ENS CW2516 Raceway Cord Cover, 5 Feet with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 25mm wide × 16mm tall (0.98" W × 0.63" H); 5-foot section with adhesive backing
- Mid-size profile in the ENS CW series — larger capacity than the CW1510 (15 × 10mm) for multi-cable runs, and more compact than the CW4016 (40 × 16mm) for installations where the largest profile is not required
- Adhesive backing for tool-free quick mounting on flat wall surfaces; can also be screw-mounted through the base for additional security
- Snap-on cover allows cables to be laid into the base channel after mounting, then covered without threading; cables can be added or removed without removing the raceway
$16.00Low Price Guarantee - $1.60SKU: CW1510-T
ENS CW1510-T Raceway Equal Tee, 15 x 10mm, Rectangular
- Equal tee (T-junction) fitting for CW1510 15 × 10mm rectangular cable raceway; splits one raceway run into two perpendicular branches, or merges two incoming raceway runs into one outgoing run
- Raceway equal tee, 15 × 10mm, rectangular; three equal-sized openings for splitting or merging CW1510 raceway runs at a T-junction
- Used when a camera cable run must branch off to serve two separate cameras, devices, or endpoints from a single cable route along a wall or ceiling
- All three tee openings are the same 15 × 10mm profile — any of the three ports can be used as the incoming run and either of the other two as the outgoing branch
$1.60Low Price Guarantee - $1.60SKU: CW1510-L
ENS CW1510-L Raceway Flat Bend, 15 x 10mm, Rectangular
- Flat 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a 90° directional change within the same plane (horizontal turn along a wall, baseboard, or ceiling surface)
- Used when the raceway must change direction 90° along a flat surface
- Pre-molded fitting ensures a consistent, professional 90° flat turn without cutting or bending the raceway section
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC
$1.60Low Price Guarantee - $64.00SKU: CW1510-KIT
ENS CW1510-KIT Raceway Cord Cover Kit, 3.5 Feet (10 Covers), Connectors & Accessories Included
- Complete CW1510 15 × 10mm raceway kit; 10 × raceway cover sections totaling approximately 3.5 feet; connectors and fittings included for a complete installation
- 15 × 10mm profile; smallest raceway in the ENS CW series; suited for single CAT5/6 or coaxial cable runs with minimal wall footprint
- PVC raceway with adhesive backing; white finish; all included fittings are the same 15 × 10mm profile as the CW1510 base covers
$64.00Low Price Guarantee - $1.60SKU: CW1510-H
ENS CW1510-H Raceway Connector, 15 x 10mm, Rectangular
- Raceway connector, 15 × 10mm, rectangular; joins two CW1510 raceway sections end-to-end in a straight line
- Used at straight-line joints between two 5-foot CW1510 raceway sections — the connector bridges the gap between sections, maintaining a continuous enclosed channel and preventing the cable from being exposed at the joint
- Essential for installations where the total cable run exceeds 5 feet and multiple CW1510 sections must be chained end-to-end; provides a professional, seamless joint between sections
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC; one connector required per junction between raceway sections
$1.60Low Price Guarantee - $1.60SKU: CW1510-C
ENS CW1510-C Raceway External Bend, 15 x 10mm, Rectangular
- External (outside corner) 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a clean 90° directional transition at outside wall corners and protruding edges
- Used when the raceway travels along a wall face and must turn outward around an outside corner — such as at the corner of a building, a pillar, or a protruding wall section
- Pre-molded external bend eliminates the need to cut miter angles in raceway sections at outside corners; ensures consistent, professional fitting at every outside corner
$1.60Low Price Guarantee - $1.60SKU: CW1510-B
ENS CW1510-B Raceway Internal Bend, 15 x 10mm, Rectangular
- Internal (inside corner) 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a clean 90° directional transition at inside wall corners
- Eliminates the need to cut, miter, or bend raceway sections to navigate inside corners; the pre-molded bend ensures a consistent, professional fit at every inside corner
- Snaps into the CW1510 base channel ends at the corner; the raceway cover sections abut the bend fitting for a continuous, sealed appearance
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC; pair with CW1510-C (external bend) for outside corners
$1.60Low Price Guarantee - $1.60SKU: CW1510-A
ENS CW1510-A Raceway End Cap, 15 x 10mm, Rectangular
- End cap for CW1510 15 × 10mm rectangular cable raceway; covers and seals the open terminal ends of a CW1510 raceway run
- Provides a professional, finished appearance at each raceway termination point — without end caps, the open ends of raceway sections expose the cable inside and leave unfinished cut edges visible at the wall
- Snaps onto the terminal end of the CW1510 raceway base and cover; no adhesive or fasteners required in most installations
- Sized specifically for the 15 × 10mm CW1510 profile — not interchangeable with CW2516-A or CW4016-A end caps
$1.60Low Price Guarantee - $12.00SKU: CW1510
ENS CW1510 Raceway Cord Cover, 5 Feet with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 15mm wide × 10mm tall (approximately 0.59" W × 0.39" H); 5-foot section with adhesive backing for tool-free wall mounting
- Adhesive backing on the raceway base allows quick, tool-free mounting to flat wall surfaces without drilling; for additional security, the raceway base can also be screwed to the wall through pre-drilled mounting holes
- Hinged or snap-on cover (depending on design variant) allows the cable to be laid into the base channel and the cover snapped closed — no need to thread the cable through; cables can be added or removed after installation without removing the raceway
$12.00Low Price Guarantee - $14.00SKU: CT-8W-100H
ENS CT-8W-100H Zip Tie with Screw Hole, White, 8 Inch 100 Pack 4.5mm
- White nylon zip tie with integrated screw hole in the head; length: 8 inches; cable tie width: 4.5mm; 100-pack
- Dual function: the screw hole in the cable tie head allows the tie to be mechanically anchored to a wall, conduit, raceway, or frame via a single screw — eliminating the need for a separate adhesive-backed cable tie mount
- Screw-mount anchor provides a far more reliable and permanent cable bundle anchor than adhesive mounts, which can debond in warm environments, high humidity, or on surfaces that cannot accept adhesive
- White color for clean, professional installations on white-painted walls, ceilings, and conduit where black cable ties would be visually conspicuous
$14.00Low Price Guarantee - $433.82SKU: AR8715
APC AR8715 Valueline Vertical Cable Manager for 2 & 4 Post Racks, 84" H X 6" W, Single-Sided with Door
- Provides vertical cable management for 2 and 4 post racks
- Features a single-sided cable channel with multiple tie-off locations
- Includes smooth plastic fingers at 1U increments for organized patching
- Comes with a door, installation guide, and mounting hardware
$433.82Low Price Guarantee - $122.66SKU: ICRESDP28E
ICC ICRESDP28E Net Media Center, Plastic, 28", White
- Durable ABS: Lightweight, strong, and enhances Wi-Fi
- Flexible Installation: Fits 16″ studs or mounts on walls
- Certified & Compliant: UL Listed, TAA, Section 889, RoHS compliant
- Vented Reversible Doors: Aids cooling; opens both ways; includes mud guard & knockouts
- Universal Mounting: Supports ICC/modules with built-in cable management
$122.66Low Price Guarantee - $219.26SKU: ICRDSMMBE8
ICC ICRDSMMBE8 8" Junction Box with Cover, Plastic, 6-Pack Contractor Value
- Multi-Purpose Use: Organizes and protects electrical and low-voltage wiring
- 6-Pack Value: Ideal for contractors and multi-install projects
- Strong ABS Build: Lightweight, durable plastic with improved Wi-Fi performance
- Easy Installation: Fits 16″ studs, wall-mountable, with cable knockouts
- Secure Cover Design: Snap-on cover with screw-down and padlock option
$219.26Low Price Guarantee - $22.54SKU: IC107B54WH
ICC IC107B54WH 4 Port Surface Mount Box, 5 Pack, White
- Compact & Versatile Design: Low-profile appearance ideal for offices, conference rooms, and home networks. Perfect for adding network, voice, audio, video, or fiber optic connections where in-wall installation is not possible
- TAA & Section 889 Compliant: Meets U.S. government regulations, including TAA and Section 889. Made from high-quality ABS plastic for durability and impact resistance. Manufactured in approved countries. UL Listed (UL# E125268), UL 1863 compliant, and RoHS compliant
- Compatibility Limitation: Not compatible with HDMI and USB couplers due to oversized connector ends
$22.54Low Price Guarantee - $47.53SKU: IC066NB053
ICC IC066NB053 66M Wiring Block Kit 50-Pair Without Bracket, 22-AWG With Clear Snap On Cover
- High-Impact Construction: Withstands 3.0–20.0 ft-lbs/in, ensuring reliable performance in demanding environments
- Flame-Retardant Material: Made from UL 94V-0 rated plastic for enhanced fire safety
- UL Listed Safety: UL Listed (E125268) for trusted professional installations
- Professional Compliance: Meets UL 1863 standards for industry-grade and commercial use
- TAA Compliant: Approved for government and institutional installations
$47.53Low Price Guarantee - $16.38SKU: IC066CV05T
ICC IC066CV05T 66 Wiring Block, Clear Cover, Snap On, 10 Pack
- Clear cover protects terminations
- Provides clean appearance
- Snaps on for convenience
$16.38Low Price Guarantee - $30.26SKU: IC066CH05T
ICC IC066CH05T 66 Wiring Block, Hinged Cover, Orange, 10 Pack
- Hinged cover protects terminations
- Provides clean appearance
- Snaps on for convenience
$30.26Low Price Guarantee - $113.71SKU: IC066BRCLT
ICC IC066BRCLT 66 Wiring Block, Bridging Clip, 100 Pack X10
- Bulk pack ideal for large-scale 66 wiring block installations and maintenance
- Tin-plated phosphor bronze for excellent conductivity and corrosion resistance
- Electrically connects adjacent terminals in the same row on 66 blocks
- U-shaped spring design ensures fast, secure insertion over terminals
- Compact size designed specifically for 66 wiring block applications
$113.71Low Price Guarantee - $481.67SKU: SLB-SA1SU1-SM3-500M
Platinum Tools SLB-SA1SU1-SM3-500M Universal Launch Cable Box, 500 Meter
- Length: 500m
- SC/APC to SC/UPC
- 9um/SM
- Provides users with 3mm Micro Armored Jacket
$481.67Low Price Guarantee - $425.00SKU: SLB-SA1SU1-SM3-150M
Platinum Tools SLB-SA1SU1-SM3-150M Universal Launch Cable Box, 150 Meter
- Length: 150m
- SC/APC to SC/UPC
- 9um/SM
- Provides users with 3mm Micro Armored Jacket
$425.00Low Price Guarantee - $552.50SKU: SLB-SA1SU1-SM3-1000M
Platinum Tools SLB-SA1SU1-SM3-1000M Universal Launch Cable Box, 1000 Meter
- Length: 1000m
- SC/APC to SC/UPC
- 9um/SM
- Provides users with 3mm Micro Armored Jacket
$552.50Low Price Guarantee - $247.92SKU: LCR-SA1SU1-SM3-500M
Platinum Tools LCR-SA1SU1-SM3-500M Universal Launch Cable Ring, 500 Meter
- Universal Launch Cable Ring
- Length: 500m
- SC/APC to SC/UPC
- 9um/SM
- Provides users with 3mm Micro Armored Jacket
$247.92Low Price Guarantee - $226.67SKU: LCR-SA1SU1-SM3-150M
Platinum Tools LCR-SA1SU1-SM3-150M Universal Launch Cable Ring, 150 Meter
- Universal Connectivity: SC/APC to SC/UPC for versatile compatibility
- High-Performance Fiber: 9µm single-mode for accurate signal transmission
- Durable Design: 3mm micro armored jacket resists wear and tear
- Compact Length: 150m cable, perfect for portable and efficient testing setups
- Professional-Grade: Built for installers, technicians, and network managers who value precision
$226.67Low Price Guarantee - $290.43SKU: LCR-SA1SU1-SM3-1000M
Platinum Tools LCR-SA1SU1-SM3-1000M Universal Launch Cable Ring, 1000 Meter
- Universal Launch Cable Ring
- Length: 1000m
- SC/APC to SC/UPC
- 9um/SM
- Provides users with 3mm Micro Armored Jacket
$290.43Low Price Guarantee - $6.36SKU: 31049
Platinum Tools 31049 Cable Tie Mount 3/4" 4-Way, 50lb Black
- Cable tie mount will keep your wire bundle secured to the wall
- Simply pull, peel, and stick the mount in the ideal location
- Cable tie made from high-strength nylon for strong, durable performance
$6.36Low Price Guarantee - $160.13SKU: 31033
Platinum Tools 31033 Cable Tie 11 Inch Plenum Rated, Red
- 11-inch plenum-rated cable tie for safe use in plenum spaces
- Constructed from high-strength nylon for durability and reliability
- Red finish for easy identification and organization
- Compatible with most tie guns for quick installation
- Ideal for temporary or permanent storage solutions
- Packaged 1000 per bag for bulk projects and efficient stocking
$160.13Low Price Guarantee - $2.62SKU: 31021
Platinum Tools 31021 Cable Tie 4 Inch Plenum Rated, Red
- Plenum‑rated 4-inch cable tie for safe use in plenum spaces
- Rugged high‑strength nylon construction for long‑lasting durability
- Red finish for easy identification and organization
- Compatible with most tie guns for quick installation
- Ideal for temporary or permanent storage solutions
$2.62Low Price Guarantee - $2.39SKU: 31009
Platinum Tools 31009 Cable Tie 6 Inch, 40lb Black
- Rugged high‑strength nylon construction for durability
- 6-inch length with 40 lb tensile strength for versatile use
- UV resistant for long‑lasting performance indoors or outdoors
- Compatible with most tie guns for easy installation
- Ideal for securing bundles to walls, racks, or other surfaces
$2.39Low Price Guarantee - $14.32SKU: 31008
Platinum Tools 31008 Cable Tie 6 Inch, 18lb Black, 1000/Bag
- Cable ties will keep your wire bundle secured to the wall
- Made from high-strength nylon for strong, durable performance
- UV resistant
- Compatible with most tie guns
- Created for a variety of weights & applications
$14.32Low Price Guarantee - $1.90SKU: 31007
Platinum Tools 31007 Cable Tie 6 Inch, 18lb Black, 100/Bag
- Cable ties will keep your wire bundle secured to the wall
- Made from high-strength nylon for strong, durable performance
- UV resistant
- Compatible with most tie guns
- Created for a variety of weights & applications
$1.90Low Price Guarantee - $7.50SKU: 31002
Platinum Tools 31002 Cable Tie 4 Inch, 18lb Black, 1000/Bag
- Cable ties will keep your wire bundle secured to the wall
- Made from high-strength nylon for strong, durable performance
- UV resistant
- Compatible with most tie guns
- Created for a variety of weights & applications
$7.50Low Price Guarantee - $1.09SKU: 31001
Platinum Tools 31001 Cable Tie 4 Inch, 18lb Black, 100/Bag
- Cable ties will keep your wire bundle secured to the wall
- Made from high-strength nylon for strong, durable performance
- UV resistant
- Compatible with most tie guns
- Created for a variety of weights & applications
$1.09Low Price Guarantee - $0.58SKU: FE020500FTTPCW100
Wire Trak FE020500FTTPCW100 1" x 1/2" Cover
- Durable plastic material resists wear and tear.
- Easy installation with adhesive backing.
- Sleek design enhances aesthetics and organization.
- Versatile size fits various cable types.
- Reduces tripping hazards and protects cables.
$0.58Low Price Guarantee - $0.58SKU: FE020500FTTPCI100
Wire Trak FE020500FTTPCI100 1" x 1/2" Cover, Ivory
- Durable plastic construction for long-lasting use
- 1" x 1/2" size hides multiple cables efficiently
- Elegant ivory finish complements any interior design
- Easy peel-and-stick installation, no professional help needed
- Versatile for home, office, and commercial applications
$0.58Low Price Guarantee - $0.58SKU: FE020500FTTPCC100
Wire Trak FE020500FTTPCC100 1" x 1/2" Cover
- Elegant 1" x 1/2" cover blends with any decor.
- Quick and easy installation for hassle-free setup.
- Durable, high-quality material ensures long-lasting performance.
- Versatile for residential and commercial wiring needs.
- Improves safety by preventing cable damage and tripping hazards.
$0.58Low Price Guarantee - $0.58SKU: FE020500FTTPCB100
Wire Trak FE020500FTTPCB100 1" x 1/2" Cover, Beige
- Durable high-quality plastic for long-lasting use.
- Easy cut-to-fit installation, no tools required.
- Beige color blends seamlessly with any decor.
- Fits wires up to 1" x 1/2" size.
- Ideal for home and office cable management.
$0.58Low Price Guarantee - $1.13$1.13Low Price Guarantee
- $1.13$1.13Low Price Guarantee
- $1.13$1.13Low Price Guarantee
- $1.52$1.52Low Price Guarantee
- $1.38SKU: FMSC375
Wire Trak FMSC375 Surface Raceway Joint Cover Fitting
- Fits 1-Piece Latching \& 2-Piece Surface Raceways
- Snaps on for easy installation
$1.38Low Price Guarantee - $1.65SKU: FMSC1125
Wire Trak FMSC1125 Surface Raceway Joint Cover Fitting
- Fits 1-Piece Latching \& 2-Piece Surface Raceways
- Snaps on for easy installation
$1.65Low Price Guarantee - $2.47SKU: FMOC500
Wire Trak FMOC500 Surface Raceway Joint Cover Fitting
- Fits 1-Piece Latching \& 2-Piece Surface Raceways
- Snaps on for easy installation
$2.47Low Price Guarantee - $2.19SKU: FMOC375
Wire Trak FMOC375 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$2.19Low Price Guarantee - $3.04SKU: FMOC1125
Wire Trak FMOC1125 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$3.04Low Price Guarantee - $4.20SKU: FMJB1R
Wire Trak FMJB1R Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$4.20Low Price Guarantee - $2.19SKU: FMIN375
Wire Trak FMIN375 Inside Corner
- Creates smooth 90° turns at interior wall corners
- Compatible with Wire Trak 1-piece and 2-piece raceways
- Snap-on design—no tools or fasteners required
- Flame-rated, high-impact UL V0-94 compliant PVC
- Color-matched for seamless appearance
$2.19Low Price Guarantee - $3.04SKU: FMIN1125
Wire Trak FMIN1125 Inside Corner
- Creates smooth 90° turns at interior wall corners
- Compatible with Wire Trak 1-piece and 2-piece raceways
- Snap-on design—no tools or fasteners required
- Flame-rated, high-impact UL V0-94 compliant PVC
- Color-matched for seamless appearance
$3.04Low Price Guarantee - $3.00SKU: FMFO500
Wire Trak FMFO500 Inside Corner
- Creates smooth 90° turns at interior wall corners
- Compatible with Wire Trak 1-piece and 2-piece raceways
- Snap-on design—no tools or fasteners required
- Flame-rated, high-impact UL V0-94 compliant PVC
- Color-matched for seamless appearance
$3.00Low Price Guarantee - $2.19SKU: FMFO375
Wire Trak FMFO375 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$2.19Low Price Guarantee - $3.71SKU: FMFO1125
Wire Trak FMFO1125 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$3.71Low Price Guarantee - $1.52SKU: FMEC500
Wire Trak FMEC500 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$1.52Low Price Guarantee - $1.38SKU: FMEC375
Wire Trak FMEC375 End Cap
- Finishes open ends of raceway runs with a clean look
- Compatible with 1-piece and 2-piece surface raceways
- Snap-on installation—no tools required
- Made from flame-rated UL V0-94 compliant PVC
- Color-matched for seamless integration
$1.38Low Price Guarantee - $1.65SKU: FMEC1125
Wire Trak FMEC1125 End Cap
- Finishes open ends of raceway runs with a clean look
- Compatible with 1-piece and 2-piece surface raceways
- Snap-on installation—no tools required
- Made from flame-rated UL V0-94 compliant PVC
- Color-matched for seamless integration
$1.65Low Price Guarantee
Filter
Shopping Options
