Cable Management
- $1.60SKU: CB-LBLUE
Kramer CB-LBLUE RJ-45 Strain Relief Boot, Light Blue Colored
- Snagless Boot
- Works with RJ45 Cables
$1.60Low Price Guarantee - $1.60SKU: CB-PURPLE
Kramer CB-PURPLE RJ-45 Strain Relief Boot, Purple Colored
- Snagless Boot
- Works with RJ45 Cables
$1.60Low Price Guarantee - $1.60SKU: CB-GRAY
Kramer CB-GRAY RJ-45 Strain Relief Boot, Gray Colored
- Snagless Boot
- Works with RJ45 Cables
$1.60Low Price Guarantee - $1.60SKU: CW1510-C
ENS CW1510-C Raceway External Bend, 15 x 10mm, Rectangular
- External (outside corner) 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a clean 90° directional transition at outside wall corners and protruding edges
- Used when the raceway travels along a wall face and must turn outward around an outside corner — such as at the corner of a building, a pillar, or a protruding wall section
- Pre-molded external bend eliminates the need to cut miter angles in raceway sections at outside corners; ensures consistent, professional fitting at every outside corner
$1.60Low Price Guarantee - $1.60SKU: CW1510-H
ENS CW1510-H Raceway Connector, 15 x 10mm, Rectangular
- Raceway connector, 15 × 10mm, rectangular; joins two CW1510 raceway sections end-to-end in a straight line
- Used at straight-line joints between two 5-foot CW1510 raceway sections — the connector bridges the gap between sections, maintaining a continuous enclosed channel and preventing the cable from being exposed at the joint
- Essential for installations where the total cable run exceeds 5 feet and multiple CW1510 sections must be chained end-to-end; provides a professional, seamless joint between sections
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC; one connector required per junction between raceway sections
$1.60Low Price Guarantee - $1.60SKU: CW1510-L
ENS CW1510-L Raceway Flat Bend, 15 x 10mm, Rectangular
- Flat 90° bend fitting for CW1510 15 × 10mm rectangular cable raceway; provides a 90° directional change within the same plane (horizontal turn along a wall, baseboard, or ceiling surface)
- Used when the raceway must change direction 90° along a flat surface
- Pre-molded fitting ensures a consistent, professional 90° flat turn without cutting or bending the raceway section
- Sized specifically for the 15 × 10mm CW1510 profile; white PVC
$1.60Low Price Guarantee - $1.60SKU: CW2516-A
ENS CW2516-A Raceway End Cap, Rectangular, 0.98" W × 0.63" H
- End cap for CW2516 25 × 16mm (0.98" W × 0.63" H) rectangular cable raceway; covers the open terminal end of a CW2516 raceway run at each cable entry or exit point
- Provides a clean, professional finished appearance at raceway termination points — exposed open ends leave cut edges visible and the cable inside the raceway unprotected at the termination
- Snaps onto the terminal end of the CW2516 raceway base and cover; white PVC; sized specifically for the 25 × 16mm CW2516 profile
$1.60Low Price Guarantee - $1.60SKU: CW2516-H
ENS CW2516-H Raceway Connector, Rectangular, 0.98" W × 0.63" H
- Raceway connector, 0.98" W × 0.63" H, rectangular; joins two CW2516 25 × 16mm raceway sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW2516 sections — one connector required at each junction between raceway pieces in a straight run
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-H or CW4016-H fittings
- Also used to couple CW2516 sections to end caps, bends, flat bends, and tee fittings
$1.60Low Price Guarantee - $1.60SKU: CW2516-L
ENS CW2516-L Raceway Flat Bend, Rectangular, 0.98" W × 0.63" H
- Flat 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a 90° directional change within the same plane (horizontal turn along a wall, baseboard, or ceiling)
- Used for same-plane 90° turns — distinct from internal bends (CW2516-B, inside corners) and external bends (CW2516-C, outside corners) which handle vertical-to-horizontal corner transitions
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-L or CW4016-L fittings
$1.60Low Price Guarantee - $1.60SKU: CW2516-T
ENS CW2516-T Raceway Equal Tee, Rectangular, 0.98" W × 0.63" H
- Raceway equal tee, 0.98" W × 0.63" H, rectangular; three equal 25 × 16mm openings for splitting or merging CW2516 raceway runs at a T-junction
- Used when a cable run must branch from one direction into two perpendicular directions
- All three tee openings are the same 25 × 16mm profile; any port can serve as incoming or outgoing
$1.60Low Price Guarantee - $1.60SKU: CW4016-A
ENS CW4016-A Raceway End Cap, Rectangular, 1.57" W × 0.63" H
- End cap for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; covers and seals the open terminal end of a CW4016 raceway run
- The largest end cap in the ENS CW series — sized for the 40mm wide × 16mm tall CW4016 profile; not interchangeable with CW2516-A (0.98" W × 0.63" H) or CW1510-A (15 × 10mm) end caps
- Provides a clean, professional finished appearance at each raceway termination point where cables enter or exit the raceway channel
- Snaps onto the terminal end of the CW4016 base and cover; white PVC; typically two end caps used per independent raceway run
$1.60Low Price Guarantee - $1.60SKU: CW4016-B
ENS CW4016-B Raceway Internal Bend, Rectangular, 1.57" W × 0.63" H
- Internal (inside corner) 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a clean 90° transition at inside wall corners
- Allows the CW4016 raceway to turn at an inside corner where two walls meet at an interior angle — maintaining the enclosed cable channel across the corner without any cutting or bending of the raceway sections
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-B (15 × 10mm) or CW2516-B (25 × 16mm) fittings
$1.60Low Price Guarantee - $1.58SKU: FE0001116F
Wire Trak FE0001116F 3/4" Flanged Wire Guards, 50 pcs @ 8' length (400')
- Alpha Trak flanged Wire Guards Designed for Extreme Environment Use
- Durable wire enclosure solutions designed for extreme outdoor environment use
- Available in PVC, high density and low density polyethylene and nylon materials
- Flange suitable punched for mechanical fastening
- Parts made from UL VO-94 compliant material
$1.58Low Price Guarantee - $1.52SKU: FE0001109F
Wire Trak FE0001109F 1/2" Flanged Wire Guards, 75 pcs @ 8' length (600')
- Alpha Trak- Ground Wire Guards and flanged Wire Guards Designed for Extreme Environment Use
- Durable wire enclosure solutions designed for extreme outdoor environment use
- Flange suitable punched for mechanical fastening
- Parts made from UL VO-94 compliant material
$1.52Low Price Guarantee - $1.52SKU: FMEC500
Wire Trak FMEC500 Outside Corner
- Creates seamless 90° turns around exterior wall corners
- Compatible with both 1-piece and 2-piece surface raceways
- Snap-on installation—no fasteners or tools required
- Made from flame-rated UL V0-94 PVC
- Color-matched for streamlined appearance
$1.52Low Price Guarantee - $1.52$1.52Low Price Guarantee
- $1.52SKU: FE020375SRB8
Wire Trak FE020375SRB8 Surface Raceway 3/4" X 1/2" X 8' (160' Per Carton – 20 Pieces Per Box)
- 2-piece design: separate base and snap-on cover allows easy cable loading and a clean, finished appearance; positive locking mechanism keeps the cover securely in place
- 375 series sizing (3/4" × 1/2") accommodates moderate cable bundle capacity — the correct size step between the smaller and larger Wire Trak raceway series for typical low-voltage and power cable runs
- 8-foot lengths, 20 pieces per carton (160 total feet) — efficient bulk packaging for contractors and installers running multiple raceway segments across a job site
- Pre-applied adhesive backing enables fast, no-drilling mounting to walls, baseboards, and other flat surfaces;
$1.52Low Price Guarantee - $1.52SKU: FE020375SRI8
Wire Trak FE020375SRI8 Surface Raceway 3/4" X 1/2" X 8' Ivory (160' Per Carton)
- 2-piece base-and-cover design with positive locking cover for easy cable loading and a clean, professional finish; ivory color coordinates with light-colored walls, baseboards, and millwork
- 375 series sizing (3/4" × 1/2") for moderate cable bundle capacity; 8-foot lengths packaged in bulk cartons (160 total feet) for efficient job-site supply
- Pre-applied adhesive backing for fast, no-drilling installation directly to walls and other mounting surfaces
- Compatible with the complete line of Wire Trak molded fittings (elbows, tees, end caps) in matching ivory finish for a fully coordinated installation
$1.52Low Price Guarantee - $1.50SKU: FE020375SRI160
Wire Trak FE020375SRI160 One Piece Latching 3/4" x 1/2" Surface Raceway, 20 pcs @ 8' length (160'), Ivory
- Integrated Cover Latching Raceway for concealing and organizing cables and wires
- Co-extruded one piece design featuring a patented, durable, flexible hinge connecting the base and cover
- Parts made from a UL VO-94 compliant PVC
- UL 62DB
- Comes with pre-applied foam tape for speedy installation
$1.50Low Price Guarantee - $1.50SKU: FE020375SRW120
Wire Trak FE020375SRW120 One Piece Latching 3/4" x 1/2" Surface Raceway, 20 pcs @ 6' length (120'), White
- Integrated Cover Latching Raceway for concealing and organizing cables and wires
- Co-extruded one piece design featuring a patented, durable, flexible hinge connecting the base and cover
- Parts made from a UL VO-94 compliant PVC
- UL 62DB
- Comes with pre-applied foam tape for speedy installation
$1.50Low Price Guarantee
Filter
Shopping Options
