Connectors
- $2.10SKU: 6082
ENS 6082 3/4 Coupling Compression Type Steel
- 3/4" trade size steel EMT compression coupling; joins two sections of 3/4" EMT end-to-end; concrete-tight and rain-tight when properly tightened
- Compression type: threaded ring compresses ferrule against EMT outer wall — more secure and moisture-resistant joint than set-screw type; suitable for outdoor, concrete-embedded, and wet-location conduit runs
- UL Listed for wet locations; concrete-tight for poured concrete applications; suitable for 3/4" EMT conduit runs requiring outdoor weather resistance at coupling points
$2.10Low Price Guarantee - $2.40SKU: 6081
ENS 6081 1/2 EMT Coupling Compression Type Steel
- 1/2" trade size steel EMT compression coupling; joins two sections of 1/2" EMT conduit end-to-end; concrete-tight and rain-tight when properly tightened
- Compression type: the threaded ring compresses a ferrule against the EMT outer wall when tightened — no tool access needed inside the conduit, and no risk of stripping as with set-screw types; provides a more secure, weatherproof joint than set-screw couplings
- Concrete-tight rating: suitable for burial in concrete poured walls and slabs where the conduit joint must resist moisture migration through the concrete into the conduit system
- Rain-tight: suitable for outdoor exposed conduit runs where moisture resistance at conduit joints is required; UL Listed for wet locations
$2.40Low Price Guarantee - $2.20SKU: CC5900-CAT6KS
ENS CC5900-CAT6KS Cat6 Keystone Jack
- Cat6 keystone jack; IDC punch-down termination for Cat6 solid conductor cable (22–24 AWG); snap-in installation into standard keystone patch panels and wall plates; RJ45 front-face port
- Cat6 performance: supports 1000BASE-T (Gigabit Ethernet) at 100 meters and 10GBASE-T at distances up to 37 meters; full PoE, PoE+, and PoE++ power delivery for IP cameras, access points, and access control devices
- 568A/568B dual-labeled IDC terminals; snap-in keystone form factor compatible with ENS S-C-PATCH24-SD and S-C-PATCH24-UNSD blank keystone patch panels and standard wall plates
- White finish standard; use in conjunction with ENS CAT6 bulk cable for a complete end-to-end Cat6 structured cabling solution
$2.20Low Price Guarantee - $1.90SKU: CC5900-CAT5KS
ENS CC5900-CAT5KS Cat5 Keystone Jack
- Cat5 keystone jack; IDC punch-down termination for Cat5/5e solid conductor cable (22–24 AWG); snap-in installation into standard keystone patch panels and wall plates; RJ45 front-face port
- Snap-in keystone form factor: snaps into any standard 1-port keystone wall plate or blank keystone patch panel slot without tools; compatible with ENS S-C-PATCH24-SD and S-C-PATCH24-UNSD patch panels
- Cat5 performance: supports 100Base-TX (100 Mbps) Ethernet; for Cat6 performance and Gigabit Ethernet/PoE, use the CC5900-CAT6KS
- White finish standard
$1.90Low Price Guarantee - $55.04SKU: SPP-K004EP
Hanwha Vision SPP-K004EP RJ45 Push-Pull Ruggedised Connector Kit
- RJ45 Push-pull ruggedized Connector Kit
$55.04Low Price Guarantee - $163.56SKU: SPP-C1245
Hanwha Vision SPP-C1245 M12 to RJ45 Converter (Pack of 5)
- Supports M12-RJ45 Ethernet cable
- Color : Black
- Product dimensions / weight : 50.8x20.2x20mm / 31.8g
$163.56Low Price Guarantee - $14.88SKU: NOC-AXPGTL
Hanwha Vision NOC-AXPGTL Pig Tail Accessory for Wavelynx Readers
- Designed for use with compatible Wavelynx readers
- Provides secure and reliable cable connectivity
- Simplifies installation and system integration
- Supports efficient access control deployment
- Durable construction for dependable long-term performance
$14.88Low Price Guarantee - $67.56SKU: IC107LATYL
ICC IC107LATYL CAT 6A EZ Module Connector, 10 Pack, Yellow
- CAT 6A rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth
- PCB technology provides maximum performance and superior signal quality
- Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals
- Exceeds ANSI/TIA-568-C requirements for permanent, channel link and component performances
- Engineered to provide 110 IDC termination reducing installation time
$67.56Low Price Guarantee - $64.89SKU: IC107LATWH
ICC IC107LATWH CAT 6A EZ Module Connector, 10 Pack, White
- CAT 6A rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth
- PCB technology provides maximum performance and superior signal quality
- Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals
- Exceeds ANSI/TIA-568-C requirements for permanent, channel link and component performances
- Engineered to provide 110 IDC termination reducing installation time
$64.89Low Price Guarantee
Cable Connectors Frequently Asked Questions
What are cable connectors used for in surveillance systems?
Cable connectors are essential components that facilitate the connection between various devices in a surveillance system. They ensure that audio and video signals are transmitted effectively from cameras to recording devices or monitors, maintaining signal integrity and quality.
How do I choose the right connector for my security camera?
To select the appropriate connector, consider the type of cable and the specific requirements of your security camera system. Common types include BNC connectors for coaxial cables and RJ45 connectors for Ethernet cables. Ensure compatibility with both your camera and the recording equipment.
Can I use old connectors with new surveillance equipment?
While some older connectors may work with new equipment, compatibility is not guaranteed. It’s crucial to check the specifications of both the old and new devices to ensure seamless integration. Using mismatched connectors can lead to poor signal quality or malfunction.
What is the difference between shielded and unshielded connectors?
Shielded connectors have additional insulation to protect against electromagnetic interference, making them suitable for environments with high electrical noise. Unshielded connectors are simpler and more cost-effective but may be prone to signal degradation in such conditions.
Do I need special tools to install cable connectors?
Installing cable connectors typically requires specific tools, such as crimping tools for RJ45 connectors or compression tools for BNC connectors. Proper installation is essential for optimal performance, as poorly attached connectors can lead to signal loss or connectivity issues.
Filter
Shopping Options
