ICRealtime Connectors
Filter
- $127.72SKU: BNC COMP-PRO
ICRealtime BNC COMP-PRO 50 x RG-59 Compression Connector, 25 Pack
- 3' (1m) 18 AWGX2C power jack to bare copper
$127.72Low Price Guarantee - $8.00$8.00Low Price Guarantee
- $8.00$8.00Low Price Guarantee
- $8.00SKU: BNC-Crimp
ICRealtime BNC-Crimp BNC Crimp-on Connector, 2 Pieces
- BNC crimp-on connector, 2 pieces
$8.00Low Price Guarantee - $6.00$6.00Low Price Guarantee
- $6.00$6.00Low Price Guarantee
- $220.00SKU: ICR-S45-1750P
ICRealtime S45-1750P PROSeries Pass-Through Shielded Cat6/Cat6a STP RJ45 Modular Plugs with Cap45 and Bar45 Technologies, Red Tint
- Combines both Cap45 and Bar45 technologies: Cap45 (Patent 10,811,831 B1) snaps over the front of the plug to cover exposed wire ends and eliminate electrical shorting risk, while the Bar45 load bar improves signal isolation and reduces crosstalk — the only shielded pass-through plug combining both technologies
- Two-piece plug design separates the plug body from the metal shield, allowing larger-diameter shielded LAN cables to be inserted further into the plug for dramatically improved, faster termination
- 3-Prong Pin Design with 50µ true 24ct gold plating; UL94 V-0 commercial rated, supporting CM through CMP and LSZH Eca to B2ca installations
- Red tint identification; manufacturer-certified channel performance reports available for Genesis, Remee, and SCP Cat6/Cat6a STP cable systems; for the equivalent unshielded ProSeries plug, see S45-1700P
$220.00Low Price Guarantee - $203.00SKU: ICR-S45-1155
ICRealtime S45-1155 Shielded Cat7a/Cat7/Cat6a RJ45 Modular Plugs with External Ground and Bar45 Technology, Orange Tint
- Standard WE/SS shielded RJ45 (8P8C) modular plug with external ground; specifically designed for FPE-insulated 10G shielded LAN cables (Cat7a, Cat7, Cat6a S/FTP, U/FTP, F/FTP); IEEE 802.3 10GBase-T compliant
- Addresses a historically difficult termination challenge: terminating shielded 10G LAN cables with standard RJ45 plugs was previously time-consuming and produced inconsistent Fluke test results on longer links — the S45-1155 was engineered specifically to solve this performance gap
- Bar45 load bar technology improves signal isolation and reduces crosstalk specifically tuned for the FPE-insulated 10G shielded cable construction
- Cost-effective alternative to industrial-style RJ45 field plug connectors, which are more expensive and still require more installer effort
$203.00Low Price Guarantee - $194.00SKU: ICR-S45-1150
ICRealtime S45-1150 Shielded Cat6 STP RJ45 Modular Plugs with External Ground and Bar45 Technology, Green Tint
- The two-piece design (rather than single-piece) was specifically engineered to handle the larger and more complex shielded cable termination, after testing determined a one-piece design could not reliably accommodate it
- 3-Prong Pin Design with 50µ true 24ct gold plating; green tint for identification; for FPE (foamed polyethylene) insulated shielded LAN cables typically found on 10G cables, see S45-1155 or the ProSeries S45-1755P instead
- Correct selection for Cat6 STP and Cat6a F/UTP cables with standard PE insulation — confirm insulation type before ordering, as FPE-insulated 10G cables require the S45-1155 or S45-1755P
$194.00Low Price Guarantee
Cable Connectors Frequently Asked Questions
What are cable connectors used for in surveillance systems?
Cable connectors are essential components that facilitate the connection between various devices in a surveillance system. They ensure that audio and video signals are transmitted effectively from cameras to recording devices or monitors, maintaining signal integrity and quality.
How do I choose the right connector for my security camera?
To select the appropriate connector, consider the type of cable and the specific requirements of your security camera system. Common types include BNC connectors for coaxial cables and RJ45 connectors for Ethernet cables. Ensure compatibility with both your camera and the recording equipment.
Can I use old connectors with new surveillance equipment?
While some older connectors may work with new equipment, compatibility is not guaranteed. It’s crucial to check the specifications of both the old and new devices to ensure seamless integration. Using mismatched connectors can lead to poor signal quality or malfunction.
What is the difference between shielded and unshielded connectors?
Shielded connectors have additional insulation to protect against electromagnetic interference, making them suitable for environments with high electrical noise. Unshielded connectors are simpler and more cost-effective but may be prone to signal degradation in such conditions.
Do I need special tools to install cable connectors?
Installing cable connectors typically requires specific tools, such as crimping tools for RJ45 connectors or compression tools for BNC connectors. Proper installation is essential for optimal performance, as poorly attached connectors can lead to signal loss or connectivity issues.
Filter
Now Shopping by
Shopping Options 