Audio Kit
- $647.00SKU: SSVC-4
Linear SSVC-4 Speaker Selector with Volume Controls for Four Pairs of Speakers
- Power handling: 100 watts per channel RMS; 200 watts peak
- Selectable impedance magnification for 1, 2, 3/4, 5/6 pairs of speakers
- Individual room on/off selector switches
- 12-step controls; 54dB maximum attenuation
- Separate left and right ground paths for compatibility with all amplifiers
$647.00Low Price Guarantee - $410.00SKU: SS8P
Linear SS8P Eight-Pair Resistor-Based On/Off Speaker Selector
- Power Handling: 125 Watts per Channel
- Frequency Response: 20Hz - 20kHz
- Protection: Front Mounted Switch & Rear Override Includes Area Labels
- Dimensions (H x W x D): 2-3/16″ x 17″ x 6-13/32″
$410.00Low Price Guarantee - $236.00SKU: SS-4
Linear SS-4 Standard Speaker Selector for Four Pairs of Speakers
- Power handling: 100 watts per channel RMS, 200 watts peak
- Protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiers, including bridged designs
- Removable screwless connectors accommodate up to 14-gauge wire
- Rugged all metal chassis construction
$236.00Low Price Guarantee - $159.95SKU: FG01040
Linear FG01040 SS-6 Standard Speaker Selector for Six Pairs of Speakers
- Power handling: 100 watts per channel RMS, 200 watts peak
- Protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiers
- Removable connectors accommodate up to 14-gauge wire
- Rugged all metal chassis construction
$159.95Low Price Guarantee - $2,204.00SKU: CON-ARRAYSPEAKER
InVid CON-ARRAYSPEAKER Complete Audio System Including Speakers, Mic & Receiver
- Integrated design: The control panel integrates MIC receiver, preamplifier, audio processor, centralised controller, power sequencer, etc.
- Quick Start: Press one button to power on the system
- Beam-forming Control: Adjustable beam-forming area with built-in software settings
- Audio over Ethernet: Digital Dante interface supported
- Reliable Installation: Wall-mount available for speakers
$2,204.00Low Price Guarantee - $25,714.28SKU: 4MN-SYSTEM
Bogen 4MN-SYSTEM Quad Driver Speaker Module with Yoke Bracket and Pole Stand Adaptor in Pelican Case with DSP, AMP
- Quad driver speaker module with yoke bracket and pole stand adaptor in Pelican case with DSP, Amp
- Batteries in a separate Pelican case, Battery charger included
- 4MN module use four MAD-1 drivers arrayed into a 2x2 configuration with each driver coupled to a waveguide
- Standard rigging hardware is built into the module allowing line arrays
- Optional mounting brackets to be installed on a wall or ceiling, a tripod stand, or on a magnetic vehicle mount
$25,714.28Low Price Guarantee - $20,561.15SKU: 4MN-P-DSP-PSU-CASE
Bogen 4MN-P-DSP-PSU-CASE 4MN-P with Separate DSP and PSU, 25' Speaker Cable, MP-3 Digital Audio Player
- 4MN-P with separate DSP and PSU in Pelican travel case
- Includes 25' speaker cable, MP-3 digital audio player, and MP-3 cable
- Rack mounted MN-PSU provide DC voltage for the MN-DSP and the built-in amplifiers in the 4MN-P modules
- 4MN-P speakers require the outboard MN-DSP system controller and MN-PSU
- DSP output connects audio input on each speaker
$20,561.15Low Price Guarantee - $13,928.57SKU: 4-1MN-SP360
Bogen 4-1MN-SP360 4 x 1MN-SP Drivers on 360-Degree Metal Frame
- 4 x 1MN-SP drivers on 360-degree metal frame
- Requires clear voice power and DSP module
- 1MN and 1MN-P have one MAD-1 driver coupled to a wave guide with 20°V x 30°H coverage at 2 Khz.
- Various mounting brackets allow installation in corners, on walls or ceilings, on tripod stand, on a magnetic vehicle mount, or in a line array
$13,928.57Low Price Guarantee - $22,190.13SKU: 2-Turbo-SYS
Bogen 2-Turbo-SYS Self Powered 2MN Speaker with Internal Rechargeable Battery, DSP and Amp
- 2MN speaker with internal rechargeable battery, DSP and Amp
- Includes Yoke stand, MP3 player, microphone headset, Aux input cable, and unit charger
- 2MN module use two vertically arrayed MAD-1 drivers
- Standard rigging hardware is built into the module allowing line arrays
- 2MN-Turbo speakers are self-contained systems with amplifiers, control, Turbo DSP, and Lithium Polymer batteries
$22,190.13Low Price Guarantee
Audio Kit Frequently Asked Questions
What is an audio kit in surveillance systems?
An audio kit in surveillance systems is a combination of devices designed for monitoring and communication purposes, typically including microphones and speakers. These kits enable two-way audio communication, allowing users to listen and speak through the system, enhancing the security and monitoring capabilities of a property.
How does a wireless audio transmitter and receiver work?
A wireless audio transmitter and receiver work by capturing sound through a microphone, converting it into an audio signal, and transmitting it wirelessly to a receiver. The receiver then converts the signal back into sound, allowing for real-time audio monitoring without the need for physical connections between devices.
Can I integrate an audio kit with my existing security system?
Yes, many audio kits can be integrated with existing security systems, provided they are compatible. This integration allows homeowners to enhance their surveillance capabilities by adding audio monitoring and communication features, making the overall security system more effective.
What features should I look for in an audio monitoring kit?
When selecting an audio monitoring kit, consider features such as omnidirectional microphones, adjustable volume controls, two-way communication, and compatibility with smartphones or tablets. Additional features like motion detection and night vision can also enhance the functionality of the kit.
Are audio kits suitable for outdoor use?
Some audio kits are designed for outdoor use and are built to withstand various weather conditions. Look for kits that specify weather-resistant or vandal-resistant features to ensure they perform effectively in outdoor environments while maintaining audio quality and durability.
Filter
Shopping Options
