Accessories
- $17.60SKU: 91-000186
Kramer 91-000186 Power Cord Japan Type C-19 180cm
- C-19 (female IEC connector) to Japanese standard (JIS C 8303 Type A polarized with ground, or Type B) plug; 180cm length; for Kramer equipment with C-20 power inlets
- Japanese power standard: 100V AC at 50 Hz (eastern Japan) or 60 Hz (western Japan); Japanese outlets use non-polarized two-pin (Type A) or grounded three-pin (Type B) plugs similar to North American style but specifically rated for Japan's 100V system
- Confirm the Kramer equipment's accepted input voltage range includes 100V before deploying in Japan - most modern switching power supplies accept 100-240V; verify before installation
$17.60Low Price Guarantee - $17.60SKU: 91-000184
Kramer 91-000184 Power Cord Israel Type C-19 180cm
- C-19 (female IEC connector) to Israeli SI 32 (Type H) plug; 180cm length; for Kramer equipment with C-20 power inlets
- Israeli Type H plug uses a unique Y-shaped arrangement of three flat pins (two current-carrying + ground) not compatible with any other regional standard - the SI 32 plug is mandatory for Israeli electrical code compliance on equipment over certain power thresholds
- C-19/C-20 connector pair rated for up to 16A at 250V for higher-current equipment
$17.60Low Price Guarantee - $17.60SKU: 91-000183
Kramer 91-000183 Power Cord Australia Type C-19 180cm
- C-19 (female IEC connector) to Australian/NZ Type I plug; 180cm length; for Kramer rack-mount equipment with C-20 power inlets typically found on higher-current-rated power supplies and UPS units
- The C-19/C-20 connector pair is rated for up to 16A at 250V - used on equipment with higher power draw than the standard C-13/C-14 (10A) connector pair; the C-19 female end connects to the equipment's C-20 inlet
- 180cm cord length accommodates standard rack-to-PDU distances; Australian Type I plug for AU/NZ power outlets
$17.60Low Price Guarantee - $46.40SKU: 99-9318250
Kramer 99-9318250 Bulk Speaker Cable 18AWG - Plenum Rated, 250'
- 18 AWG stranded 2-conductor speaker cable; CMP (Communications Multipurpose Cable Plenum) rated; 250-foot reel
- Plenum-rated (CMP): required by the National Electrical Code (NEC Article 800) for cable routed through air-handling ceiling plenums and HVAC return-air spaces in commercial buildings - plenum cable uses flame-retardant, low-smoke materials that meet the more stringent NEC plenum fire safety requirements vs. CMR riser-rated or CM-rated cables
- 18 AWG wire gauge is appropriate for background music and paging applications at typical distributed audio levels and run lengths (up to approximately 50 feet per conductor at 8Ω for less than 0.5dB loss); for longer runs requiring lower resistance, see the 14 AWG 99-2416300
$46.40Low Price Guarantee - $360.00SKU: 99-0450100
Kramer 99-0450100 Four–Pair Cat7a S/FTP Data Bulk Cable (23AWG)
- Quality Construction - 4 individually aluminum–foil shielded twisted pairs (S/FTP), cabled with a drain conductor and overall braid–shielded
- Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted pair digital transmitter–receiver sets. Terminate with shielded RJ–45 connectors
$360.00Low Price Guarantee - $483.20SKU: 99-0440300
Kramer 99-0440300 Cat6 Cable for Digital Tx/Rx (1000')
- Cat6 UTP solid-conductor 23 AWG bulk cable; 1,000-foot reel; validated for use with Kramer HDBaseT, DGKat, and other digital Tx/Rx extender systems
- Kramer-validated cable for digital extenders: the Cat6 parameters (characteristic impedance, attenuation, NEXT, return loss) of this specific cable are known to meet Kramer extender requirements - using validated cable reduces the risk of signal issues at maximum extension distances that unvalidated generic Cat6 may exhibit
- Solid-conductor 23 AWG construction is the correct cable type for in-wall and structured cabling runs; for patch cords and flexible jumper applications, stranded conductor cables are preferred
$483.20Low Price Guarantee - $755.20SKU: 99-2416300
Kramer 99-2416300 Low Smoke Speaker Cable 14 AWG, 985'
- 14 AWG stranded 2-conductor speaker cable; Low Smoke Zero Halogen (LSZH) jacket; 985-foot (300-meter) reel
- LSZH jacket: in a fire, standard PVC cable jackets emit thick black smoke and toxic halogen gases that impede evacuation and cause injury - LSZH jackets produce significantly less smoke and no halogen gases, required or preferred in EU buildings, transportation infrastructure, schools, and public-access spaces under local fire safety regulations
- 14 AWG wire gauge provides low resistance for longer speaker cable runs (up to approximately 100 feet per conductor at 8Ω load for less than 0.5dB loss) and handles the current of typical 4-8Ω commercial speaker installations
$755.20Low Price Guarantee - $8.00SKU: 96-0235006
Kramer 96-0235006 USB 3.0 A (M) to B (M) Cable, 6'
- USB 3.0 A Male to B Male
- Transfer Rates up to 4.8Gbps - 10x the capability of USB 2.0
- Foil & Overall Braid Provide Maximum Protection Against EMI/RFI
- Molded Strain Relief
- Backward Compatibility - USB Specifications 1.0, 1.1 and 2.0
$8.00Low Price Guarantee - $7.20SKU: 96-0235003
Kramer 96-0235003 USB 3.0 A (M) to B (M) Cable, 3'
- USB 3.0 A Male to B Male
- Transfer Rates up to 4.8Gbps - 10x the capability of USB 2.0
- Foil & Overall Braid Provide Maximum Protection Against EMI/RFI
- Molded Strain Relief
- Backward Compatibility - USB Specifications 1.0, 1.1 and 2.0
$7.20Low Price Guarantee
Accessories Frequently Asked Questions
What types of accessories are available for surveillance systems?
Surveillance system accessories include connectors, mounts, enclosures, and installation tools. These components enhance the functionality and installation of cameras and other surveillance equipment, ensuring optimal performance and security.
How do I choose the right connector for my surveillance system?
Selecting the right connector depends on your specific camera and cable type. Common options include BNC connectors for coaxial cables and RJ45 connectors for networked cameras. Ensure compatibility with your existing equipment to maintain signal integrity.
What is the purpose of using enclosures for surveillance cameras?
Enclosures protect surveillance cameras from environmental factors like dust, moisture, and vandalism. They are essential for outdoor installations, ensuring the longevity and reliability of the camera while maintaining optimal performance.
Are there specific tools needed for installing surveillance accessories?
Yes, installation tools like crimpers, cable testers, and screwdrivers are essential for properly setting up surveillance accessories. These tools help ensure secure connections and proper alignment, which are crucial for effective surveillance.
Can I use any mount for my surveillance camera?
Not all mounts are compatible with every camera model. It's important to select a mount designed for your specific camera type and weight to ensure stability and proper positioning for optimal surveillance coverage.
Filter
Shopping Options
