LSDI Accessories
Filter
- $143.00SKU: LS-81-000
LSDI LS-81-000 Creep-ZitTM Pro 36 Ft Threaded Connector Wire Running Rod Kit
- Five FiberFuseTM 6 ft. push/pull rods with
- Male and female threaded connector ends
- One luminous (glows in the dark) FiberFuseTM 6 ft. push/pull rod with male and female threaded connector ends
- One threaded connector 6 ft. Fish-TailzTM 1/8″ diameter mesh pull sock
- Luminous whisk threaded connector tip
$143.00Low Price Guarantee - $68.04SKU: LS-54-105
LSDI LS-54-105 P-1 Portasol Soldering Kit
- Assorted spare tips
- Flint ignition
- 60 minute run time
- Anti Static ESD Safe
- Ready to melt solder less than 30 seconds from ignition
$68.04Low Price Guarantee - $47.75SKU: LS-62-338
LSDI LS-62-338 3/8” ReBore-Zit (1/4” Pilot Size)
- The bit is fabricated with a hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft.
- The bit will not twist the wire.
- ReBore-Zit bit to accommodate the preexisting hole
- step-up in ReBore-Zit sizes until you obtain your desired final hole size.
- The ReBore-Zit the Standard 3/8″
$47.75Low Price Guarantee - $1,447.99SKU: LS-80-610
LSDI LS-80-610 RoyRodsTM All-Tool-Mate Master Tool Kit (USA Only)
- LS-81-700 RoyRodsTM Pro 36″
- LS-81-709 RoyRodsTM Drag-Zit Magnet
- LS-81-706 Z-Tip Quick Connect Tip
- LS-81-707 J-Tip Quick Connect Tip
- LS-81-708 RoyRodsTM Female/Bullnose
$1,447.99Low Price Guarantee - $1,171.00SKU: LS-80-600
LSDI LS-80-600 All-Tool-Mate Master Threaded Tool Kit (USA Only)
- LS-81-000 Creep-Zit Pro 36″
- LS-81-360 Creep-Zit Drag-Zit Magnet
- LS-82-350 Z-Tip Push/Pull Tip
- LS-82-370 J-Tip Hook
- LS-81-300 Creep-Zit Replacement Threaded
$1,171.00Low Price Guarantee - $175.00SKU: LS-56-115
LSDI LS-56-115 12” Double Blade Hole Cutter
- For cutting round holes in ceilings, walls and floors
- Cuts veneer, plywood, sheet rock (gypsum board), f iberglass, fiber cement board, plaster, stucco, etc.
- Can be used with either hand drill or pillar drill
- Maximum cutting depth: 2″ (50 mm)
- Maximum cutting diameter: 12″ (305 mm)
$175.00Low Price Guarantee - $130.00SKU: LS-85-330
LSDI LS-85-330 YFTTM 30 Fret Yellow Epoxy Fish Tape in case
- Fiberglass Fish Tapes are designed with the patented FiberFuseTM process, are continuous length rods which are smaller in diameter (.120″) than your Creep-Zit rods (.175″) and have no rigid connectors
- When flexibility is important, these fish tapes are the perfect solution
- Designed for conduit and tight rod runs that might otherwise stress your standard Creep-Zit rods
- Metal bullnose tip with push/pull eye on both ends. Ball chain with clip included on one end
$130.00Low Price Guarantee - $113.05SKU: LS-56-015
LSDI LS-56-015 10” Double Blade Hole Cutter
- Adjust to desired width and depth
- Attach to drill Pilot Drill Bit Blades Durable case included: 13″ x 14″ DESCRIPTION 10″ Double Blade Hole Cutter Replacement Blades for 10″ Hole Cutter
- Remove safety caps from blades and pilot bit
- Always wear safety glasses when using product
- Verify that there are no electrical components behind the surface to be drilled
$113.05Low Price Guarantee - $105.00SKU: LS-62-368
LSDI LS-62-368 3/4” ReBore-Zit (3/8” Pilot Size)
- The bit is fabricated with a hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft.
- The bit will not twist the wire.
- ReBore-Zit bit to accommodate the preexisting hole
- step-up in ReBore-Zit sizes until you obtain your desired final hole size.
- The ReBore-Zit the Standard 3/4″
$105.00Low Price Guarantee
Accessories Frequently Asked Questions
What types of accessories are available for surveillance systems?
Surveillance system accessories include connectors, mounts, enclosures, and installation tools. These components enhance the functionality and installation of cameras and other surveillance equipment, ensuring optimal performance and security.
How do I choose the right connector for my surveillance system?
Selecting the right connector depends on your specific camera and cable type. Common options include BNC connectors for coaxial cables and RJ45 connectors for networked cameras. Ensure compatibility with your existing equipment to maintain signal integrity.
What is the purpose of using enclosures for surveillance cameras?
Enclosures protect surveillance cameras from environmental factors like dust, moisture, and vandalism. They are essential for outdoor installations, ensuring the longevity and reliability of the camera while maintaining optimal performance.
Are there specific tools needed for installing surveillance accessories?
Yes, installation tools like crimpers, cable testers, and screwdrivers are essential for properly setting up surveillance accessories. These tools help ensure secure connections and proper alignment, which are crucial for effective surveillance.
Can I use any mount for my surveillance camera?
Not all mounts are compatible with every camera model. It's important to select a mount designed for your specific camera type and weight to ensure stability and proper positioning for optimal surveillance coverage.
Filter
Now Shopping by
Shopping Options 