Access Control Power products
- $82.95SKU: LBP-124500
MG Electronics LBP-124500 Lithium Rechargeable Battery
- 4500AH rated lithium-ion rechargeable battery pack
- 2.1mm Barrel output plug
- Charger included
- On/Off Switch built-in
- Automatic charger with complete indicator
$82.95Low Price Guarantee - $27.81SKU: 1280
ELK 1280 Sealed Lead Acid Battery 12V 8.0Ah
- Sealed Lead Acid / SLA Battery
- Non Spillable
- Nominal voltage: 12VDC
- Rated Capacity: 8aH (20 hour rate)
- Terminals: F1 Faston Tab No 187
$27.81Low Price Guarantee - $37.78SKU: 1800-mAh-9-6V-BATT
Visonic 1800-mAh-9-6V-BATT Flat Backup for Powermax Pro and Amberx - NiMHZ
- Flat backup for powermax pro and amberx - NiMHZ
$37.78Low Price Guarantee - $191.46SKU: AL600ULXB
Altronix AL600ULXB Power Supply Charger, Single Class 2 Output, 12/24VDC @ 6A, 115VAC, Board
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
- Low battery supervision
- Battery presence supervision
- AC input and DC output LED indicators
$191.46Low Price Guarantee - $38.87SKU: SMP3
Altronix SMP3 Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 24/28VAC, Board
- 16VAC to 28VAC
- 6VDC, 12VDC or 24VDC selectable output
- 2.5 amp continuous supply current
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
$38.87Low Price Guarantee - $71.97SKU: AL175ULB
Altronix AL175ULB Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1.75A, Board
- Input 28VAC/56VA
- Access control trigger input
- 12VDC or 24VDC selectable outputs
- 1.75 amp supply current
- PTC protected outputs, rated @ 2.5 amp
$71.97Low Price Guarantee - $144.83SKU: AL125UL
AltronixAL125UL Access Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1A, 115VAC, BC100 Enclosure
- Input 115VAC, 50/60Hz, 0.6 amp
- Access control trigger input
- 12VDC or 24VDC selectable outputs
- 1 amp supply current
- PTC protected outputs, rated @ 2.5 amp
$144.83Low Price Guarantee - $261.48SKU: AL1012ULXPD4
Altronix AL1012ULXPD4 Power Supply Charger, 4 Fused Outputs, 12VDC @ 10A, 115VAC, BC400 Enclosure
- Input 115VAC, 60Hz, 1.9A
- Input fuse rated @ 5A/250V
- 12VDC output
- 10A continuous supply current
- Four (4) fuse protected outputs
$261.48Low Price Guarantee - $65.94SKU: RBC35
APC RBC35 Replacement Battery Cartridge 35 with 2 Year Warranty
- 12V 3.0AH replaceable battery for APC Back-UPS
- Brand new battery shipped from strictly managed warehouse
- Peace of mind with 2-year warranty and UPS safety certifications
- Lead-acid battery
$65.94Low Price Guarantee - $1,265.00SKU: PDM2330L6-23-980
APC PDM2330L6-23-980 IT Power Distribution Module 2 Pole 3 Wire 30A L2-L3 L6-30 980CM
- Power distribution module with one 2-pole breaker
- 30A breaker
- 980cm output cable
$1,265.00Low Price Guarantee - $7,185.00SKU: APDU11452MO
APC APDU11452MO NetShelter Rack PDU Advanced Generation 2, Metered Outlet, 3Phase, 17.3kW
- Ideal for AI and other high density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Live Swap Network Management Card 3
- Enhanced cybersecurity and EcoStruxureTM IT compatible
- 1 year free subscription to Secure NMC3 System
$7,185.00Low Price Guarantee - $4,065.00SKU: APDU11151SW
APC APDU11151SW NetShelter Rack PDU Advanced Generation 2, Switched, 5.0kW
- Ideal for high-density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- 1 year free subscription to Secure NMC3 System
- Next-gen PDU speeds up IT deployments, one PDU for every type of device
- Enhanced cybersecurity and EcoStruxureâ„¢ IT compatible
$4,065.00Low Price Guarantee - $2,075.00SKU: AP8932US
APC AP8932US NetShelter Switched Rack PDU, 0U, 2.9kW
- Ideal for Colocation, large data centers or distributed IT sites
- Plan capacity and balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh)
- Power sequencing delays determine the order in which power is turned on or off
- Zero U toolless installation
- Remote management of rack PDUs for efficient time-saving
$2,075.00Low Price Guarantee - $1,440.00SKU: AP8830US
APC AP8830US NetShelter Metered Rack PDU, 0U, 1.9kW
- Ideal for Colocation, large data centers or distributed IT sites
- Real-time remote monitoring of connected load through EcoStruxure IT and other platforms
- Zero U toolless installation
- Plan capacity and balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh)
- Stay on top by defining alarm thresholds in order to avoid overloaded circuits
$1,440.00Low Price Guarantee - $1,669.00SKU: SGP-2800IN
ENS SGP-2800IN Sun Guardian Battery for SGP-V2, 25.2V, 2800Wh
- Compatible with ENS SGP-V2 Sun Guardian system
- 25.2V battery output
- 2800Wh energy capacity
- High-capacity lithium battery technology
- Reliable backup power for remote installations
$1,669.00Low Price Guarantee - $62.40SKU: AIVO-BATT-54T4KP
Avycon AIVO-BATT-54T4KP Spare Battery for AIVO-54T4KP
- Genuine replacement battery for the Avycon AIVO-54T4KP camera
- Designed for seamless compatibility and reliable performance
- Ideal as a spare or replacement battery for uninterrupted surveillance
- Supports continuous operation in remote and off-grid installations
- Quick and easy installation with a direct-fit design
$62.40Low Price Guarantee - $475.00SKU: VS-L6Q-SPEB
Pelco VS-L6Q-SPEB L6Q Solar Panel Expansion Battery Only
- Additional 12V 18Ah expansion battery
- Solar Battery Expansion Y cable
- 12V, 4A battery charger with 2-pin output plug
- Used to charge the battery without solar panel
$475.00Low Price Guarantee - $130.58SKU: APCRBC162
APC APCRBC162 Replacement Battery Cartridge #162
- 12V 6.5AH replaceable battery for APC Back-UPS Pro
- Brand new battery shipped from strictly managed warehouse
- Peace of mind with 2-year warranty and UPS safety certifications
- Lead-acid battery
$130.58Low Price Guarantee - $3,771.59SKU: APDU11452ME
APC APDU11452ME NetShelter Rack PDU Advanced Generation 2, Metered, 3Phase
- Ideal for AI and other high density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Live Swap Network Management Card 3
- Enhanced cybersecurity and EcoStruxureTM IT compatible
- 1 year free subscription to Secure NMC3 System
$3,771.59Low Price Guarantee - $4,775.00SKU: APDU11151SM
APC APDU11151SM NetShelter Rack PDU Advanced Generation 2, Switched Metered Outlet, 5.0kW
- Ideal for high-density applications
- Next-gen PDU speeds up IT deployments — one PDU for every type of device
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Enhanced cybersecurity and EcoStruxureâ„¢ IT compatible
- 1 year free subscription to Secure NMC3 System
$4,775.00Low Price Guarantee
Access Control Power Products Frequently Asked Questions
What are access control power products?
Access control power products are devices that provide the necessary power and management for access control systems. These products include power supplies, controllers, and battery backups designed to ensure that access control systems operate reliably and efficiently.
How do I choose the right power supply for my access control system?
To choose the right power supply, consider the voltage and current requirements of your access control devices. Ensure the power supply can handle the total load and has features like short circuit protection and battery backup capabilities for reliability during power outages.
What is the importance of battery backup in access control systems?
Battery backup is crucial for maintaining access control functionality during power outages. It ensures that doors remain secure and accessible when the main power is lost, preventing unauthorized access and maintaining safety and security for your property.
Can I use multiple battery packs in my access control system?
Yes, many access control systems support multiple battery packs for extended power supply and redundancy. This setup can provide additional runtime during outages and ensure that your system remains operational even if one battery fails.
What features should I look for in an access power controller?
When selecting an access power controller, look for features such as multiple output options, built-in battery chargers, and protection against short circuits and thermal overloads. Additionally, ensure it supports the voltage and current requirements of your access control devices for optimal performance.




















