Access Control Power products
- $1,018.12SKU: T1RALK33WV
Altronix T1RALK33WV Access and Power Integration Rack Mount Enclosure with Backplane, Trove1 Rack Series
- Power status LED for use where power and access control boards share the same enclosure
- Simplifies board layout and wire management
- Convenient knockout configuration
- Six (6) 1.25″ diameter knockouts located on the back of enclosure
- 2U drawer on extendable rails
$1,018.12Low Price Guarantee - $1,016.38SKU: T2AXK7F8SD
Altronix T2AXK7F8SD 8-Door Altronix/Axis Access and Power Integration Kit
- Voltage: 120VAC, 60Hz, 4.5A max
- Fuse Rating: 10A/32V
- AC Failure: Form ″C″ contacts
- Battery: Form ″C″ contacts
- Fail-Safe and/or Fail-Secure power outputs. Form ″C″ Relays rated 28VAC or VDC @ 2.5A
$1,016.38Low Price Guarantee - $1,006.03SKU: APCRBC152
APC APCRBC152 Replacement Battery Cartridge for Smart-UPS On-Line, 12V 5Ah Lead-Acid Battery
- Brand new battery shipped from strictly managed warehouse
- Leak-proof sealed lead-acid battery
- Fully assembled and ready for use
- Supports APC-authorized recycling for earth-friendly disposal
$1,006.03Low Price Guarantee - $983.46SKU: MAXIMAL77F
Altronix MAXIMAL77F 16 Fused Relay Outputs Access Power Controller with Power Supply/Chargers, BC800 Enclosure
- 120VAC 60Hz, 9 amp input
- Sixteen (16) Access Control System trigger inputs
- 24VDC outputs
- Maximum output current 24VDC @ 9.6 amp plus 24VDC @ 9.6 amp
- Sixteen (16) independently controlled outputs
$983.46Low Price Guarantee - $983.46SKU: MAXIMAL77FD
Altronix MAXIMAL77FD 16 PTC Class 2 Relay Outputs Access Power Controller with Power Supply/Chargers, BC800 Enclosure
- 120VAC 60Hz, 9 amp input
- Sixteen (16) Access Control System trigger inputs
- 24VDC outputs
- Maximum output current: 24VDC @ 9.6 amp plus 24VDC @ 9.6 amp
- Power-limited outputs
$983.46Low Price Guarantee - $974.00SKU: MAXFIT7512APS
Altronix MAXFIT7512APS 20Amp 12/24VDC Access Control Power Supply
- Altronix ACMS12/ACMS12CB are sub-assemblies designed to be used in Altronix wall and rack mount enclosures
- Dual input design allows power to be steered from two (2) independent low voltage 5 to 24VDC power sources into twelve (12) independently controlled fuse or PTC protected outputs
- Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger
- Altronix PDS16 dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources
- Two Inputs can be either, both DC (e.g. 12VDC and 24VDC) or both AC (e.g. 16VAC and 24VAC)
$974.00Low Price Guarantee - $974.00SKU: MAXFIT7512APSD
Altronix MAXFIT7512APSD 20Amp 12/24VDC Access Control Power Supply ACMS12 & PDS16
- Altronix ACMS12/ACMS12CB are sub-assemblies designed to be used in Altronix wall and rack mount enclosures
- Dual input design allows power to be steered from two (2) independent low voltage 5 to 24VDC power sources into twelve (12) independently controlled fuse or PTC protected outputs
- Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger
- Altronix PDS16 dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources
- Two Inputs can be either, both DC (e.g. 12VDC and 24VDC) or both AC (e.g. 16VAC and 24VAC)
$974.00Low Price Guarantee - $959.00SKU: T2PXK7F8V
Altronix T2PXK7F8V 8-Door Access and Power Integration Kit - Trove2PX2 with eFlow104NBV, ACM8, VR6, PDS8
- 24VDC @ 10A power supply charger
- Accommodates the following Paxton module Net2 Plus
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
$959.00Low Price Guarantee - $957.00SKU: T2MK7F8MM
Altronix T2MK7F8MM 8-Door Access and Power Integration Kit - Trove2 with eFlow104NB, PDS8, ACM8 Minuteman Version
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
- AC input and DC output LED indicators
- Supervision: AC Fail, Low Battery and Battery Presence, Low power shutdown
$957.00Low Price Guarantee
Access Control Power Products Frequently Asked Questions
What are access control power products?
Access control power products are devices that provide the necessary power and management for access control systems. These products include power supplies, controllers, and battery backups designed to ensure that access control systems operate reliably and efficiently.
How do I choose the right power supply for my access control system?
To choose the right power supply, consider the voltage and current requirements of your access control devices. Ensure the power supply can handle the total load and has features like short circuit protection and battery backup capabilities for reliability during power outages.
What is the importance of battery backup in access control systems?
Battery backup is crucial for maintaining access control functionality during power outages. It ensures that doors remain secure and accessible when the main power is lost, preventing unauthorized access and maintaining safety and security for your property.
Can I use multiple battery packs in my access control system?
Yes, many access control systems support multiple battery packs for extended power supply and redundancy. This setup can provide additional runtime during outages and ensure that your system remains operational even if one battery fails.
What features should I look for in an access power controller?
When selecting an access power controller, look for features such as multiple output options, built-in battery chargers, and protection against short circuits and thermal overloads. Additionally, ensure it supports the voltage and current requirements of your access control devices for optimal performance.
Filter
Shopping Options
