Wireless Transmission
Add cameras where cabling is tough with our wireless transmitters & receivers. Build point-to-point links with wireless bridges, blanket areas using access points and wireless routers, and pair video transmitters with receivers for clean links. Fine-tune range and reliability with high-gain antennas. Most options support PoE and outdoor, long-range, line-of-sight installs.
Featured Wireless Transmission Manufacturers
- $1,017.00SKU: NW10DR
Comnet NW10DR Industrially Hardened Dual Radio Narrow Bandwidth Wireless Bridge, FCC certified for North America
- Narrow Channel Spectrum Widths for large and noisy deployments
- 5,10,20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 miles
$1,017.00Low Price Guarantee - $994.00SKU: NWK11E-M
Comnet NWK11E-M Mini Industrially Hardened Point-To-Point Wireless Ethernet Kit for Short Range Deployments
- Complete wireless kit consisting of two radios, power supplies, and mounting hardware
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Scalable - Narrow Channel 5 and 10 MHz Bandwidths will allow you to expand your WLAN without losing reliability by increasing the total number of non-overlapping channels
- Up to 100 Mbps Throughput
- 802.11a/n Compliant
$994.00Low Price Guarantee - $968.00SKU: NW2/NP
Comnet NW2/NP Industrially Hardened Point-To-Multipoint Wireless Ethernet Link
- Up to 95Mbps Throughput
- 802.11a/n Compliant
- Distance up to 2km (ETSI)
- Powered by the included power injection module or by an IEEE802.3af PoE compliant device
- Environmentally Hardened -40º to +75ºC
$968.00Low Price Guarantee - $872.00SKU: NW7E/M
Comnet NW7E/M Individual Small Size Hardened Single Radio, Two Gb Ethernet Ports
- High throughput: Up to 180 Mbps in one direction, Up to 240 Mbps total full duplex
- IEEE802.3af PoE Compliant PD
- 802.11a/n Compliant
- Distances up to 2km (ETSI)
- Environmentally Hardened -40º to +70ºC
$872.00Low Price Guarantee - $864.00SKU: M2M-RUT240
ICRealtime M2M-RUT240 Compact 4G /LTE & Wi-Fi Cellular Router
- Compact size for NEMA wireless solutions
- Wide operating temperature
- Wireless access point with Hotspot function
- LTE Cat 4 speeds up to 150 mbp/s
- WAN Failover with backup connection
$864.00Low Price Guarantee - $840.00SKU: NW1
Comnet NW1 Individual Hardened Point-To-Multipoint Wireless Ethernet Device
- Up to 95Mbps Throughput
- 802.11a/n Compliant
- Distance up to 2 mi (FCC)
- Powered by the included power injection module or by an IEEE802.3af PoE compliant device
- Environmentally Hardened -40º to +75ºC
$840.00Low Price Guarantee - $797.78SKU: NW2/M/IA870
Comnet NW2/M/IA870 Mini Industrially Hardened Point-to-Multipoint Wireless Ethernet Link
- Up to 95Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2 km (ETSI)
- Environmentally Hardened -40º to +75ºC
- Meets class IP67 dust and water immersion protection standards
$797.78Low Price Guarantee - $797.78SKU: NW1/M/IA870
Comnet NW1/M/IA870 Mini Industrially Hardened Point-to-Multipoint Wireless Ethernet Link
- Up to 95Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2 km (ETSI)
- Environmentally Hardened -40º to +75ºC
- Meets class IP67 dust and water immersion protection standards
$797.78Low Price Guarantee - $774.00SKU: ANAP22005Q
Avycon ANAP22005Q Indoor Dual Band 2,200 Mbps 802.11AC Wireless Access Point
- Indoor Dual Band 2.4Ghz/5.8Ghz 802.11ac Wi-Fi Access Point
- Supports speeds of up to 2,200 Mbps
- Supports the following operation modes: Residential Access Point, Router, Commercial Access Point (Managed with the ANAC100)
- Easy wireless setup mode allows for configuration with any mobile device or computer
- Supports the following wireless encryption: WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
$774.00Low Price Guarantee
Wireless Transmitters & Receivers Frequently Asked Questions
What is a wireless transmitter?
A wireless transmitter is a device that sends audio or video signals over the air without the need for physical cables. It typically uses radio frequency (RF) or Wi-Fi technology to transmit data to a receiver, allowing for flexible installation and mobility. Wireless transmitters are commonly used in security systems, allowing homeowners to monitor their properties without the clutter of wires.
How do I choose the right wireless receiver?
When selecting a wireless receiver, consider factors such as compatibility with your existing surveillance system, range, and signal strength. Look for receivers that support the same frequency as your transmitters and have features like encryption for security. Additionally, ensure it can handle the number of channels you need for your cameras or devices.
Are wireless surveillance systems reliable?
Yes, wireless surveillance systems can be reliable, provided they are installed correctly and maintained. Factors such as distance from the transmitter, interference from other devices, and environmental conditions can affect performance. Choosing high-quality equipment and ensuring proper placement can enhance reliability and provide consistent monitoring.
What is the range of wireless transmitters?
The range of wireless transmitters varies based on the technology used and environmental factors. Most consumer-grade wireless transmitters can operate effectively within a range of 100 to 300 feet indoors, while outdoor models may reach up to several miles, depending on line-of-sight conditions. Always check the specifications for the specific model you are considering.
Do wireless transmitters require power?
Yes, wireless transmitters typically require a power source to operate. Many models use batteries, while others may need to be plugged into an electrical outlet. Battery-operated transmitters offer flexibility in placement but require regular battery changes, whereas wired options provide a constant power supply but limit installation locations.
Filter
Shopping Options
