Wire Connectors
- $104.00SKU: ICR-S45-1100
ICRealtime S45-1100 Cat6/Cat6a UTP RJ45 Modular Plugs with Bar45 Hi/Lo Stagger Design, Green Tint, 100-Pack
- Bar45 load bar improves signal isolation and substantially reduces near-end crosstalk (NEXT) and far-end crosstalk (FEXT) inside the plug, while also reducing the length of untwisted wire for further crosstalk improvement
- Works with larger LAN cable diameters than the S45-1000, including larger Cat6 UTP solid and Cat6a UTP solid cables, and larger stranded unshielded LAN cables too large for the S45-1000
- 3-Prong Pin Design with 50µ true 24ct gold plating; green tint for visual identification; UL94 V-0 commercial rated; PoE/PoH rated; lifetime warranty
- Provides among the best crosstalk performance of any unshielded RJ45 plug on the market, per manufacturer certification testing on multiple Cat6/6a UTP channel configurations
$104.00Low Price Guarantee - $100.00SKU: ICR-S45-1050
ICRealtime S45-1050 Shielded Cat5e STP RJ45 Modular Plugs with Internal Ground, Blue Tint, 50-Pack
- Single-piece fully shielded RJ45 (8P8C) modular plug with internal ground; no load bar required; accommodates Cat5e STP solid 24 AWG and 28-26 AWG stranded shielded LAN cables, wire conductors 0.95–1.05mm; max cable OD 6.10mm (0.24")
- Internal ground shielding: provides the grounding path required for proper shielded cable termination, critical for maintaining shielding integrity and EMI protection in STP installations
- 3-Prong Pin Design with 50µ of true 24ct gold plating for reliable, durable termination performance; light blue tint with overall internal ground shielding makes the shielded plug easily distinguishable from unshielded variants
$100.00Low Price Guarantee - $82.00SKU: ICR-S45-1000
ICRealtime S45-1000 Cat5e UTP RJ45 Modular Plugs, Blue Tint, 100-Pack Jar
- Single-piece unshielded standard RJ45 (8P8C) modular plug; no load bar required; supports Cat5e UTP solid 24 AWG and 28-26 AWG stranded LAN cables, wire conductors 0.95–1.05mm; max cable OD 6.4mm (0.252")
- 3-Prong Pin Design with 50µ of true 24ct gold plating — 3 points of contact with the copper wire conductor instead of the typical 2-prong design, providing more reliable, longer-lasting termination than standard RJ45 plugs
- Improved crosstalk performance: the internal design allows the LAN cable to be inserted further into the plug, reducing the length of untwisted wire and improving NEXT (near-end crosstalk) performance
$82.00Low Price Guarantee - $2.10SKU: 8232I
ENS 8232I 1/2 Flex Connectors Screw In Type with Insulated Throat Zinc Die Cast
- 1/2" trade size zinc die cast screw-in FMC connector with insulated throat; screws directly into the interior ridges of 1/2" flexible metal conduit (FMC) without clamps, set screws, or tools
- Screw-in connectors screw into the interior ridges of flexible metal conduits and provide a smooth pulling surface for wires when connected to electrical junction boxes or enclosures; require no screws, clamps, or fasteners — save both time and money by connecting directly into flexible conduit interior threads
- Insulated throat: nylon insert eliminates the sharp metal edge at the wire entry, protecting conductor insulation during and after pull-in — satisfies NEC insulated throat/bushing requirements at conduit-to-box entries in a single piece
$2.10Low Price Guarantee - $2.40SKU: 6072I
ENS 6072I 3/4 Connectors Compression with Insulated Throat Steel
- 3/4" trade size steel compression EMT connector with insulated throat; concrete-tight and rain-tight; nylon insulated throat protects conductor insulation at the box entry point
- Correct specification for 3/4" EMT conduit runs entering outdoor enclosures, weatherproof boxes, and concrete-embedded panels where conductor pull-in protection and moisture-resistant box connection are both required
- Steel construction; UL Listed for wet and concrete-tight locations
$2.40Low Price Guarantee - $4.00SKU: 6071I
ENS 6071I 1/2 EMT Connectors Compression with Insulated Throat Type Steel
- 1/2" trade size steel compression EMT connector with insulated throat; concrete-tight and rain-tight; nylon insulated throat protects conductor insulation from abrasion at the box entry point
- Compression type: rain-tight and concrete-tight seal at conduit-to-box entry — the correct specification for outdoor, wet-location, and concrete-embedded conduit entries into panels, boxes, and enclosures
- UL Listed for wet locations and concrete-tight applications; steel construction; for 3/4" trade size
$4.00Low Price Guarantee - $1.10SKU: 8142
ENS 8142 3/4 EMT Coupling Set Screw Type Zinc Die Cast
- 3/4" trade size zinc die cast set-screw EMT coupling; joins two sections of 3/4" EMT end-to-end; two set screws secure both conduit sections in the coupling body
- Set screw type: standard screwdriver installation; the standard interior dry-location coupling for 3/4" EMT conduit systems
- Zinc die cast construction; not rated for outdoor or wet-location applications; for rain-tight or concrete-tight applications in 3/4" EMT, use the compression-type coupling (ENS 6082)
$1.10Low Price Guarantee - $1.00SKU: 8141
ENS 8141 1/2 EMT Coupling Set Screw Type Zinc Die Cast
- 1/2" trade size zinc die cast set-screw EMT coupling; joins two sections of 1/2" EMT conduit end-to-end; two set screws — one per conduit end — secure both conduit sections in the coupling body
- Set screw type: standard screwdriver installation; the most common, economical coupling for interior dry-location EMT; faster installation than compression type
- Zinc die cast construction; lightweight and corrosion-resistant for interior environments; not concrete-tight or rain-tight — for outdoor or wet-location conduit, use the compression-type coupling
$1.00Low Price Guarantee - $1.30SKU: 8132
ENS 8132 3/4 EMT Connectors Set Screw Type Zinc Die Cast
- 3/4" trade size zinc die cast set-screw EMT connector; attaches 3/4" EMT conduit to electrical boxes and enclosures; single set screw secures the conduit in the connector body
- Set screw type: standard screwdriver installation; the most common connector for interior dry-location 3/4" EMT installations
- Zinc die cast construction: lightweight and corrosion-resistant; suitable for interior dry-location conduit runs
$1.30Low Price Guarantee
Filter
Shopping Options
