Linear Transmission
Move video and data reliably over any distance with our transmission gear. Bridge long runs with fiber optic transmission, repurpose coax with UTP & baluns, or go cable-free using wireless transmission. Split and route sources via video distribution and matrix solutions, and convert streams with video encoders & decoders. For short hops and accessories, see data transmission—all built for surveillance uptime.
Featured Transmission Manufacturers
Filter
- $23.26SKU: MCS109410
Linear MCS109410 109410 2-Channel Visor Transmitter
- Compatible with 310 MHz Stanley and Multi-Code receivers
- Supplied with visor clip
- Easy access to battery and coding switches
- Power: 9-volt battery
- Codes: 1,024 per channel (set by dip switches)
$23.26Low Price Guarantee - $68.00SKU: 190-109025
Linear 190-109025 3-Button 3-Door, Open-Close-Stop Transmitter 318 MHz
- Compatible with 3-channel Allstar and MVP receivers
- Portable transmitter
- Easy access to battery and coding switch
- Slide switch selects door to operate
- Power: 9-volt battery
$68.00Low Price Guarantee - $123.45SKU: DA-520A
Linear DA-520A Bi-directional RF Amplifier
- 54 MHz to 806 MHz forward bandwidth
- 5 MHz to 42 MHz reverse bandwidth
- ±1.5 dB gain flatness
- Maximum output level 30 dBmv
- 3.5" W x 1.2" H x 2.5" D
$123.45Low Price Guarantee - $44.21SKU: DNT00062
Linear DNT00062 Keypad Transmitter
- Activates multiple Delta-3 receivers
- 1-8 digit PIN
- Backlit keys for easy viewing
- Mounting hardware supplied
- Power: 9-volt battery
$44.21Low Price Guarantee - $376.61SKU: GTV-COMPSVID-2-HDMIS
Linear GTV-COMPSVID-2-HDMIS Composite to HDMI Scaler
- Inputs S-Video or Composite Video at 480i or 576i resolutions
- Outputs HDMI video at resolutions of up to 1080p
- Input resolution is automatically detected while the output resolution and refresh rate can be selected via the on-screen display (OSD) menu system and front panel push-buttons
- 48MB frame buffer for frame rate conversion
- Scales Composite Video and S-Video to HDMI with embedded audio
$376.61Low Price Guarantee - $17.20SKU: MCS308911
Linear MCS308911 1-Channel Visor Transmitter
- Compatible with 300 MHz Multi-Code receivers
- Supplied with visor clip
- Easy access to battery and coding switches
- Power: 9-volt battery
- Codes: 1,024 (set by dip switches)
$17.20Low Price Guarantee - $66.55SKU: DNP00006
Linear DNP00006 Delta Double 24 Volt, Single Channel
- Radio receiver and transmitter set
- One DR receiver
- Two DT transmitters
- Compatible with 310 MHz Delta-3 systems
$66.55Low Price Guarantee - $1,125.00SKU: XT-4K-VIP-RX
Linear XT-4K-VIP-RX 4K Video Over IP Receiver with Audio Breakout
- Advanced UHD video over 1Gb Network
- Virtually unlimited system size
- Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
- Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)
- Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
$1,125.00Low Price Guarantee - $124.95SKU: DNT00072
Linear DNT00072 Delta-3 Safety Edge Transmitter
- Safety edge transmitter
- Activates one Delta-3 receiver for remote stop or reverse safety edge
- No cables or coiled wires
- Mounting screws (4) supplied
- Power: 9-volt battery
$124.95Low Price Guarantee
Transmission Frequently Asked Questions
What is video transmission in surveillance systems?
Video transmission refers to the process of sending video signals from a camera to a recording device or monitor. This can be done through various methods, including wired connections like coaxial cables or fiber optics, and wireless technologies. The quality and reliability of the transmission are crucial for ensuring clear video footage for security monitoring.
How does wireless video transmission work?
Wireless video transmission uses radio waves to send video signals from cameras to receivers without the need for physical cables. This method typically involves the use of Wi-Fi or other wireless protocols, allowing for greater flexibility in camera placement. However, it may be subject to interference and requires a stable power source for the cameras.
What are the benefits of using fiber optic transmission for surveillance?
Fiber optic transmission offers high bandwidth and long-distance capabilities, making it ideal for large surveillance systems. This technology is less susceptible to electromagnetic interference and provides superior image quality compared to traditional copper cables. Additionally, fiber optics can transmit data over several miles without degradation, ensuring reliable performance.
What is a balun and how is it used in video transmission?
A balun is a device that converts between balanced and unbalanced signals, commonly used in video transmission systems. It allows video signals to be sent over twisted pair cables or coaxial cables, facilitating longer distances without loss of quality. Baluns are particularly useful for integrating different types of video equipment in surveillance setups.
What should I consider when choosing a video transmission method for my home?
When selecting a video transmission method, consider factors such as distance between the camera and the recording device, environmental conditions, and the desired video quality. Wired options like coaxial or fiber optic cables provide stable connections, while wireless methods offer flexibility. Additionally, assess the installation complexity and the potential for future scalability of your surveillance system.
Filter
Now Shopping by
Shopping Options 