Tools
- $199.99SKU: 502
PanaVise 502 - Precision PanaPress
- One end of the ram is reamed 0.251″ (6.4mm) for adding tooling
- Four adjustable nylon gibs provide exceptional ram control
- Arm is 8″ (203.2mm) long
- Used for customer tooling
- Reversible ram applies up to 1/4 ton (500 lbs. / 227kg) of pressure and is 0.75″ x 0.75″ (19.1mm x 19.1mm) square and 5.875″ (149.2mm) long
$199.99Low Price Guarantee - $159.02$159.02Low Price Guarantee
- $65.48SKU: 100004C
Platinum Tools 100004C EZ-RJ45 Crimp Tool
- Crimps and trims extended wire in EZ-RJ45® Connector in a single cycle. (EZ-RJ12/11® requires manual trimming)
- For use with EZ-RJ45® Cat 5/5e & Cat 6 Connectors
- Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP)
- Features precision cast crimping dies for superior accuracy
- Built-in wire cutter and stripper for silver satin
$65.48Low Price Guarantee - $39.87SKU: D151TP
LH Dottie D151TP Tamperproof 15-in-1 Screwdriver
- Contains common security bit load
- Specially loaded for (note cut off)
- 15 in 1 tamper proof driver is a must for all commercial/industrial tradesmen (electricians, security, etc.)
- 15 in 1 tamper proof comes loaded with the most common security bits, including spanner, hex pin and star pin
- Red cap and black body color
$39.87Low Price Guarantee - $110.08$110.08Low Price Guarantee
- $179.14$179.14Low Price Guarantee
- $14.39SKU: 19103
Platinum Tools, 19103, Micro Mini II Precision Screwdriver Set, 13 pc
- Hardened (RC55) CrV 8660 bits
- Smooth action rotating cap
- High impact plastic case
- Bits included Slotted 2.0, 1.5, 1.2, 1.0, Phillips 0000, 000, 00, 0, Torx(tm) 3, 4, 5, 6
$14.39Low Price Guarantee - $15.72SKU: 15034C
Platinum Tools 15034C 3 Level Coaxial Cable Stripper for RG-59/62/6/6 Quad
- Works with RG-59/62/6/6 Quad coax cables
- Adjustable stripping depth for various insulation types and thicknesses
- Uses drop-in replacement blades, no cassettes required
- Hex wrench snaps into housing for convenient storage
- Molded from high impact plastic for long life
$15.72Low Price Guarantee - $25.76SKU: 4007
Platinum Tools 4007 Hanging Pouch for Snap Shot Fault Finding/Cable Length Meter, Coax Clarifier Meters
- Tough black nylon fabric
- Wrap around strap with snap buckle
- D-ring for hanging up rolled-out pouch
- Three zippered compartments
- Compatible with all Platinum Tools Test Equipment
$25.76Low Price Guarantee - $25.50SKU: 15063
Platinum Tools 15063 EZ-Fiber Slitter
- Completely enclosed blades for safe slitting of cable jacket
- Simple push-press-pull operation makes outer jacket slitting simple and fast
- Encased in hard molded plastic to provide durable, field friendly housing
- Field proven high grade stainless steel blades provide sharp, long lasting performance
- Economical design offers cost effective tool for every day operations
$25.50Low Price Guarantee - $20.37SKU: 10514C
Platinum Tools 10514C CCS-6 Cable Cutter
- Fully tested to 10,000 cuts on RG6 CCS, copper clad steel center conductor, with no degradation to the cutting blades
- Provides outstanding cutting performance on all types of solid copper wire, twisted pair and coax cables
- Optimal blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable
- Comfortable PVC handle grips
$20.37Low Price Guarantee - $22.44SKU: 10517C
Platinum Tools 10517C 5" Scissor-Run Electrician's Scissors
- Full serrated bottom blade for non-slip cutting
- Scraper and file on backside of blades
- Inside blade is chrome plated for rust protection
- Easily re-sharpens & holds cutting edge
- Stripping notches for 19 & 23 AWG wire
$22.44Low Price Guarantee - $10.47SKU: 10521C
Platinum Tools 10521C Leather Pouch
- Made of through hardened, high carbon steel
- Includes a leather pouch
- Can be used for telecom, datacom, and security applications
- Steel Nickel-plated with a comfortable, non-slip grip, weighted handle
$10.47Low Price Guarantee - $26.71SKU: 10525C
Platinum Tools, 10525C, Telcom Electrician Scissors, Package for Peghook
- Cuts stranded wire to 12 AWG
- Cuts solid wire to 16 AWG
- Trims Kevlar in fiber optic cable
- Strips 19 to 23 AWG wire
- Serrated edges on back of blades for cleaning wire and binding posts
$26.71Low Price Guarantee - $45.53SKU: 10530C
Platinum Tools, 10530C, Ceramic Kevlar Scissors
- Cuts fiberglass aramid fibers
- Zirconia ceramic blades
- Never needs sharpening
- Large finger loops for ease of use
$45.53Low Price Guarantee - $23.80SKU: 10540C
Platinum Tools 10540C BTC-20 (2/0) Cable Cutter
- Cuts solid or stranded cable & wire up to 2/0 (70 sq. mm) soft copper (not hard drawn)
- Cuts up to 4/0 (95 sq. mm) aluminum
- Cuts 100-pair 24 AWG telephone cable
- Cuts cleanly without distorting cable
- High leverage design for greater cutting capacity
$23.80Low Price Guarantee - $34.37SKU: 12507C
Platinum Tools 12507C Tele-Titan Modular Plug Crimp Tool
- Compact, balanced and easy to use - fits hand well
- Uses true parallel or straight action, vertical crimp force
- Precisely seats, or terminates, all pins to industry specified crimp heights
- Stays securely closed for storage with
- Crimps with nominal hand force
$34.37Low Price Guarantee - $6.83SKU: 13004BLC
Platinum Tools, 13004BLC, Replacement Knives, for PN 13004, 3 per, Clamshell
- Lower cost, replace just the cutting knives, not the complete blade
- Beveled cutting edge
- Faster, cleaner termination
- Less stress on sensitive circuitry
$6.83Low Price Guarantee - $44.80SKU: 13008B
Platinum Tools 13008B Punchdown Impact Tool w/110 EZ-Data Blade
- Use to terminate and trim wires in 66 and 110 style cross connect blocks
- Use to terminate and trim wires in 110 & 630 style wall jack modules
$44.80Low Price Guarantee - $28.57SKU: 13023C
Platinum Tools 13023C BIX Style Punchdown Blade
- Manufactured from high carbon tool steel
- Heat treated for durability
- Compatible with industry standard punchdown tools
$28.57Low Price Guarantee - $14.99SKU: 15018C
Platinum Tools 15018C All-In-One Stripping Tool
- Coax (Video) replaceable cassette blades are pre-set, no adjustment required
- Twisted pair (Data) is adjustable and covers a wide range of Cat5e and Cat6 cables
- Round cables (Voice) is adjustable and covers a wide range of telephone round and flat satin cables
- Multi-conductor cables
- Audio cables
$14.99Low Price Guarantee - $11.21SKU: 15020C
Platinum Tools 15020C Double Ended Coax Stripper for RG59/6/6Q/7/11
- Works with RG-7/11/213/8 and RG-59/6/6 Quad cable types
- Quickly and easily remove the cable jacket and inner conductors in a single step
- Control the cutting depth by the number of rotations made around the cable
- Preset, no adjustments required
- Compact, lightweight and simple operation
$11.21Low Price Guarantee - $50.08SKU: 16212C
Platinum Tools 16212C RG11/6 Standard F Type Compression Crimp Tool
- Patented rotating connector positioner
- Molded cushioned handle
- High carbon tool steel frame
- Black oxide rust resistant finish
$50.08Low Price Guarantee - $65.96SKU: 16213C
Platinum Tools 16213C SealSmart PROCON Compression Tool
- Head rotates to switch from RG6Q/6 to RG11/7
- Connector positioner rotates to change between F, BNC or RCA
- Adjustable crimp stroke
- Accommodates all standard compression F, BNC, RCA & right angle connectors
- Convenient, easy to use, all-in-one compression tool
$65.96Low Price Guarantee - $50.08SKU: 16214C
Platinum Tools 16214C RG11/6 Short F Type Compression Crimp Tool
- Patented rotating connector positioner
- Molded cushioned handle
- High carbon tool steel frame
- Black oxide rust resistant finish
$50.08Low Price Guarantee - was $114.44 Special Price $110.00SKU: AVF-1
OPTEX AMERICAC, AVF-1, View Finder for the SIP Detector Series
- View finder from optex which is a necessary tool to use when organizing the proper installation of an SIP detector
- Perfect for taking out the guesswork when setting up and installing a Redwall SIP detector, and helps with visual identification of the infrared areas within a detector′s range which helps in eliminating blind spots that can occur
was $114.44 Special Price $110.00Low Price Guarantee - $77.39SKU: IB31PK
L.H. Dottie IB31PK Compact Combo Bit Kit, 31-Piece
- 31 Piece Assorted Standard and Tamper Proof
- Packed In A Belt Mount Case
- Contains Most Popular Sizes of Standard and Tamper Proof Bits
$77.39Low Price Guarantee - $14.42SKU: JH980
Platinum Tools JH980 Eye Lag Driver
- High quality all steel construction
- Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
$14.42Low Price Guarantee - $65.91SKU: RTTP6000
L.H. Dottie RTTP6000 Replaceable Tip, 1/4-Inch to 1/2-Inch Step Drill
- A real money saver base bits last 3 to 4 times longer at a fraction of the cost
- Economical replaceable tips lock in place
- Step bit performance remains identical to that of non replaceable tip bits
- Constructed of M2 high speed steel, coated with titanium and cobalt
- Tri-cut tip cuts smoother, faster and cooler
$65.91Low Price Guarantee - $105.46SKU: RTTP6020
L.H. Dottie RTTP6020 Step Drill Bit, 1/4-Inch to 1-1/8-Inch Base and Tip
- A real money saver base bits last 3 to 4 times longer at a fraction of the cost
- Economical replaceable tips lock in place
- Step bit performance remains identical to that of non replaceable tip bits
- Constructed of M2 high speed steel, coated with titanium and cobalt
- Tri-cut tip cuts smoother, faster and cooler
$105.46Low Price Guarantee - $110.00$110.00Low Price Guarantee
- $8.91$8.91Low Price Guarantee
- $11.58$11.58Low Price Guarantee
- $11.14$11.14Low Price Guarantee
- $26.73SKU: CT-W-T5009
Cantek CT-W-T5009 Crimper for BNC and Similar Connectors
- Crimper for BNC and similar Connectors
$26.73Low Price Guarantee - $5.64$5.64Low Price Guarantee
- $162.00SKU: CT-W-T5082
Cantek CT-W-T5082 Crimper for Waterproof BNC/RCA/RG58(RG-59,RG-6) Connectors
- Waterproof Connectors
$162.00Low Price Guarantee - $21.38$21.38Low Price Guarantee
- $12.89SKU: 10503
Platinum Tools 10503 - Cut-N-Strip
- 26 AWG to 14 AWG
- Full-flush cutting jaws
- Self adjusting stripping jaws, no stripping holes to locate
- For use on copper wire only
$12.89Low Price Guarantee - $17.35SKU: 11008
Platinum Tools, 11008, BNC 8" Removal Tool, Economy
- Use to insert and remove BNC connectors in digital video patch bays and in high-density
- DSX cross connect systems
- Machined from tool steel and heat treated
- Durable handle made from resin
$17.35Low Price Guarantee - $18.91SKU: 11009
Platinum Tools, 11009, BNC 12" Removal Tool, Economy
- Use to insert and remove BNC connectors in digital video patch bays and in high-density
- DSX cross connect systems
- Machined from tool steel and heat treated
- Durable handle made from resin
$18.91Low Price Guarantee - $18.39SKU: 11020
Platinum Tools 11020 - F Connector Tool
- 7/16 inch hex socket for mating and un-mating
- 3/8-32 threaded end for connector assembly
- Rugged extruded plastic handle
- Long life chrome finish
$18.39Low Price Guarantee - $20.19SKU: 11022
Platinum Tools 11022 - F Connector Tool
- 7/16" hex socket for mating and un-mating
- 3/8-32 threaded end for connector assembly
$20.19Low Price Guarantee - $85.83SKU: 15316
Platinum Tools, 15316, Maxim 16 Wire Stripper, 10-5 AWG, Boxed
- Ergonomic Handle Design
- Auto Form Laminated Stripping Jaws
- Adjustable Wire Stop
- Built-In Cutter with Safety Guard
- High Grade Polymers & Carbon Steels
$85.83Low Price Guarantee - $99.99SKU: 100054C
Platinum Tools 100054C EZ-RJPRO HD Crimp Tool
- Zero flex frame prevents torque loss during the crimping cycle
- Clean, ultra flush trim on the EZ-RJ45® extended conductors
- Built-in cutter and stripper for flat and round cable
- Full surface to surface contact delivers uniform crimp force
- Laser marked with wiring guide for proper wire sequence
$99.99Low Price Guarantee - $39.28SKU: 10200C
Platinum Tools, 10200c, Heavy Duty Cable Tie Gun
- Maximum capacity of .250" width
- Tension adjustment wheel in handle
- Automatic flush cut-off eliminates sharp edges on ties
$39.28Low Price Guarantee - $30.17SKU: 10500C
Platinum Tools, 10500C, Coax & Round Wire Cable Cutter
- Cuts solid and stranded wire to 8 AWG
- Cuts multi-conductor cable to 1/2" diameter
- Cuts coaxial cables without deforming the dielectric
$30.17Low Price Guarantee - $20.28SKU: 10510C
Platinum Tools, 10510C, BTP - 6" Coax & Data Cable Cutter
- Cuts solid, stranded and multi-conductor cables to 6 AWG
- Cuts coaxial cables without deforming the dielectric
- Dual elliptical cutting blades
$20.28Low Price Guarantee - $28.59SKU: 10512C
Platinum Tools 10512C Steel Wire Cutter
- Contractor quality
- Forged from chrome molybdenum & hardened to 58-60 HRC
- Rust resistant electrophoretic deposition finish
- Smooth spring action for easy, repetitive cutting
- Handles contoured for comfortable hand grip
$28.59Low Price Guarantee - $18.99SKU: 10550C
Platinum Tools, 10550C, 100 Pair (2/0) Cable Cutter
- Cuts to 100 pair group telephone cable
- Cuts solid or stranded cable to 2/0 AWG
- Cuts large diameter coaxial cable such as RG9U
$18.99Low Price Guarantee
Filter
Shopping Options
