Vitek Pelco Intellinet Power
Filter
- $1,723.17SKU: POE16ATN-EU
Pelco POE16ATN-EU 16 Port IEEE802.3at Midspan with European Power Cord
- Fully 802.3at Compliant Detection, Disconnect, Over Voltage, and Current Protection
- Diagnostic LEDs
- SNMP Network Management
- Optional Secure Sockets Layer (SSL) with SNMPv3
- 10/100/1000Base-T Compatibility
$1,723.17Low Price Guarantee - $63.99SKU: 561600
Intellinet 561600 2-Port Gigabit Ultra PoE Extender
- Doubles the maximum connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
- Connects and powers two PoE devices such as network cameras, wireless access points or VoIP phones, from one PoE injector or PoE switch PSE port
- Delivers up to 60 W to two connected PoE devices with up to 30 W per port
- Supports 10/100/1000 Mbps data rates
- Total PoE power budget of 60 watts
$63.99Low Price Guarantee - $1,329.95SKU: POE1236-ATUS
Pelco POE1236-ATUS 12 Port 36W POE Midspan
- High Power over 2-pairs - 36W per port
- PowerView Pro secure, remote SNMPv3 and Cloud-based management
- Safe & reliable power over existing Ethernet infrastructure
- Cisco and legacy PoE support (dongles required)
- Plug-and-play installation
$1,329.95Low Price Guarantee - $111.78SKU: POE1AT-EU
Pelco POE1AT-EU Single Port PoE+ Midspan with European Power Cord
- Fully 802.3at Compliant Detection, Disconnect, Over Voltage, and Current Protection
- 30 W Output
- Diagnostic LEDs
- Gigabit Compatibility
- Nonvented Case
$111.78Low Price Guarantee - $126.99SKU: 561648
Intellinet 561648 IPE-OD2G60 2-Port Outdoor Vandalproof Gigabit PoE++ Extender
- Doubles the maximum connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
- Connects and powers two PoE devices, such as network cameras, wireless access points or VoIP phones, from a PSE port on a PoE injector or PoE switch
- Delivers up to 60 W to two connected PoE devices with per-port power up to 30 W
- IP67-rated, dustproof and waterproof
- IK10-rated, vandal-proof
$126.99Low Price Guarantee - $32.14SKU: OHOVPS1B
Pelco OHOVPS1B Wide Range Power Supply for Camera IN 100-240Vac - OUT 12Vdc
- Wide range power supply for camera IN 100-240Vac - OUT 12Vdc
$32.14Low Price Guarantee - $199.99SKU: 120234
Intellinet 120234 6-Outlet 19" Rackmount Managed Metered Power Distribution Unit
- Intelligent 6-way single-phase PDU for electrical equipment, ideal for networking, telecom, security, and audio/video
- Six metered US NEMA 5-15R outlets plus one non-metered bypass outlet
- 2,160 joule surge protection against dangerous power surges, line noise, and spikes
- Remote access and control via web browser
- Monitors delivered power in voltage and current
$199.99Low Price Guarantee - $100.99SKU: 561778
Intellinet 561778 Outdoor Vandal proof Gigabit High-Power PoE+ Injector
- Power over Ethernet with output up to 30 watts
- IP67-rated, dustproof and waterproof
- IK10-rated, vandal-proof
- Suitable for extreme operating temperatures of -40 to 75ºC (-40 to 167ºF)
- Compatible with IEEE 802.3at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more
$100.99Low Price Guarantee - $2,074.16SKU: POE2436-ATEU
Pelco POE2436-ATEU 24 Port 36W POE Midspan
- High Power over 2-pairs - 36W per port
- PowerView Pro secure, remote SNMPv3 and Cloud-based management
- Safe & reliable power over existing Ethernet infrastructure
- Cisco and legacy PoE support (dongles required)
- Plug-and-play installation
$2,074.16Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Now Shopping by
Shopping Options 