Vitek Bosch MG Electronics Thinkware Comnet Linear Power
Filter
- $28.00SKU: PS12-1-25
Linear PS12-1-25 Power Supply, Wall Mount, 100-240 V, 0.50A 12VDC, 1.25A Level VI
- Power Supply
- Wall Mount
- 100-240 V, 0.50A
- 12VDC, 1.25A Level VI
$28.00Low Price Guarantee - $38.94SKU: PS-8C
MG Electronics PS-8C Regulated and Filtered Power Supply with Cigarette Lighter Plug
- Thermal overheating protection with auto reset
- Input Fuse Protection
- Short circuit protection with auto reset
- Built-in voltage surge protection
- Low ripple
$38.94Low Price Guarantee - $25.12SKU: UPA-1220-60
IQsight by Bosch UPA-1220-60 Plug-In Power Supply, 100-240VAC Input, 12VDC Output, 60Hz
- Used for providing efficient and continuous power to CCD and Megapixel cameras, and keyboards
- Meets Energy Efficiency Level IV ratings
- Suitable for powering devices that consume less power, allegiant system accessories, and control devices
- Operates at 100-240 VAC (rated input) and 12VDC (rated output)
- Complies with CE regulations, UL, CSA, EN, and IEC standards
$25.12Low Price Guarantee - $195.99SKU: BC-MX5102
Linear BC-MX5102 Replacement Battery Pack (1) MX5102
- Battery Backup
- 600VA UPS, 2 Outlets
- Clean Power Level 3
$195.99Low Price Guarantee - $122.00SKU: PS-MORD1260
Comnet PS-MORD1260 Industrial DIN Rail Mountable Power Supplie
- Universal AC input: 85 to 264 VAC, 47-63Hz
- Small package size for limited space installations
- Mounts on standard 35 mm (DIN 3 or TS-35) DIN rail ″ "TS-35 x 7.5 or TS-35 x 15
- Wide operating temperature range: - 40° C to +70° C
- Natural convection cooling ″ "no troublesome fans
$122.00Low Price Guarantee - $15.95SKU: ST-122A
MG Electronics ST-122A 12VDC 2000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 12VDC 2000MA
- Two Screw Output Terminals
- Lightweight
- UL, cUL, FCC Listed
$15.95Low Price Guarantee - $10.46SKU: ST-121A
MG Electronics ST-121A 12VDC 1000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 12VDC 1000MA
- Two Screw Output Terminals
- Lightweight
- UL, cUL, FCC Listed
$10.46Low Price Guarantee - $399.00SKU: NPD-9501A
IQsight by Bosch NPD-9501A 1-Port High PoE Midspan, 95W
- Supports high-power PoE/PoH and complies to both the IEEE 802.3af and the IEEE 802.3at standards.
- 60 W and 95 W models
- Mounts to a wall, shelf, bench, desktop, and to other units
$399.00Low Price Guarantee - $50.30SKU: MIW-SURGE-1G
Linear MIW-SURGE-1G 15A In-Wall Duplex, 2 Outlets with Surge Protection
- Decora Faceplate Interface
- Piece surrounds the receptacles and fits within a standard cover plates Decora cutout.
- Uses standard wiring device screw-hole.
- Bi-color Indicator LED.
- Green = Power OnRed = Line Fault
$50.30Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
