Power
- $101.24SKU: P124
ELK P124 Power Supply and Battery Charger, 24VDC
- Built-In Battery Charging Circuit
- Auto Reset ″fuseless″ Overload Protection (PTC)
- Visual AC and DC Power Indicators
- AC and DC Surge Suppression
$101.24Low Price Guarantee - $88.21SKU: PT724A
Altronix PT724A 1 Channel, LCD Display, Battery Charger, Annual Event Timer
- 12 to 24 volts AC or DC operation
- Standby current: 10mA (relay off) 50mA (relay on)
- Battery charging current: 100mA
- Form ″C″ relay contacts are rated 10amp @120VAC/28VDC
- EE Prom memory protects against loss of programming due to power failure
$88.21Low Price Guarantee - $71.28SKU: CTW-UL12VDC9P10A
Cantek CTW-UL12VDC9P10A 9 PTC Output CCTV Distributed Power Supply, UL Listed
- Input 110/120 VAC
- Output 12V DC, 9channels
- 10Amp Supply Current
- Integral Surge Protection
- Individual LED Power Indication
$71.28Low Price Guarantee - $61.20SKU: DTK-DR12B
Ditek DTK-DR12B Din-Rail Low Voltage 12V 5A
- Protects (2) circuit pairs
- Field-replaceable protection module
- Hybrid design utilizing SAD and GDT technologies
- Shorts to ground when compromised
- Connection to ground via grounded DIN rail or the included grounding lug
$61.20Low Price Guarantee - $57.20SKU: DTK-120HW
Ditek DTK-120HW 120VAC Surge Protective Device
- Approved for 20A circuit breakers
- NEMA 4X weatherproof enclosure allows for use in harsh environments
- Diagnostic LED indicates ground presence, system power and SPD function
- Complies with ANSI/IEEE C62.41 and C62.45 category B standards
$57.20Low Price Guarantee - $54.60SKU: CT-W-12VDC-9P-5A-UL
Cantek CT-W-12VDC-9P-5A-UL 12VDC 5 Amps 9 PTC Output CCTV Distributed Power Supply
- Input 110/120 VAC
- Output 12V DC, 9channels
- 5 Amp Supply Current
- Integral Surge Protection
- Individual LED Power Indication
$54.60Low Price Guarantee - $50.70SKU: CTW-12VDC-9P-5A
Cantek CTW-12VDC-9P-5A CCTV Distributed Power Supply
- Input 88-264 V AC
- Output 12V DC, 9channels
- 5 Amp Supply Current
- Integral Surge Protection
- Individual LED Power Indication
$50.70Low Price Guarantee - $27.00SKU: 100
ELK 100 Siren Driver High Performance
- Draws Less Current Than Most Sirens
- MilliMiser™Lowers Current Draw
- Economical - Drives Multiple Speakers
- ComboTrigger™For Single Outputs
- Pre-Wired for easy Installation
$27.00Low Price Guarantee - $22.76SKU: TP2440
Altronix TP2440 Plug-in Transformer, 24VAC @ 40VA
- Plug-in Transformer
- Provides 24VAC @ 40VA
$22.76Low Price Guarantee - $18.95SKU: ST-242A (Grounded)
MG Electronics ST-242A (Grounded) 24VDC 2000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 24VDC 2000MA
- 3rd prong ground pin
- Three Screw Output Terminal
- Lightweight
$18.95Low Price Guarantee - $12.07SKU: ST-PS12VDC2A
SecurityTronix ST-PS12VDC2A 12VDC 2Amp Regulated Power Supply UL Listed
- Output 12V 2000mA
- AC input: 100 ~ 240VAC
- UL Listed
$12.07Low Price Guarantee - $90.40SKU: MX-SNT-INT-PoE
Mobotix MX-SNT-INT-PoE External Power Supply with RJ45 Plug
- Connections: 1x RJ45 (for adapter), 1x network (up to 4x interchangeable adapter)/li>
- Nominal data input: 100 V to 240 V, 50 to 60 Hz/400 mA/li>
- Nominal data output: DC 24 V/750 mA/li>
- Ambient temperature: 0 to +40°C / 32 to +104 °F
- Nominal data input: 100 V to 240 V, 50 to 60 Hz/400 mA/li>
$90.40Low Price Guarantee - Connections: 1x RJ45 (for adapter), 1x network (up to 4x interchangeable adapter)/li>
- $84.00SKU: DTK-MRJ45TDP12
Ditek DTK-MRJ45TDP12 Single Channel TDP Protector RJ45
- Single Channel TDP Protector RJ45
$84.00Low Price Guarantee - $64.35SKU: 912B6
ELK 912B6 Relay SPDT 12/24V Big terminals (6 pack)
- High Quality Cross-head Terminals
- 12 or 24 Volts D.C. Selectable Operation
- Low Current Draw
- Voltage Input LED
- Form ″C″ Dry Contacts
$64.35Low Price Guarantee - $25.92SKU: CT-W-POE-1CH
Cantek CT-W-POE-1CH 1 Port 30W POE Plus Injector
- 1 port POE Plus injector
- 30W PoE Injector 802.3af/at standards
- Injector can power both existing 10/100Base-T network devices and emerging wireless 100Base-T devices
$25.92Low Price Guarantee - $383.04SKU: AL602ULADAJ
Altronix AL602ULADAJ NAC Power Supply, 2 Class A or 4 Class B Outputs, 24VDC @ 6.5A, 115VAC, Red BC600 Enclosure
- Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backupZero voltage drop upon transfer to battery backupAC input and DC output LED indicatorsAC fails supervision
$383.04Low Price Guarantee - $2,744.15SKU: SMX2200HV
APC SMX2200HV Smart-UPS X 2200VA Rack/Tower LCD 200-240V
- Provides actual kilowatt hours of usage for energy conscious users
- Reduces or eliminates bulky transformers resulting in lighter units for ease of handling
- Reduces utility costs, generates less heat
- Allows additional run time to be quickly added as needed
- Customize UPS capabilities with management cards
$2,744.15Low Price Guarantee - $233.19SKU: EFLOW104NB
Altronix EFLOW104NB Single Output Power Supply Charger, 24VDC @ 10A, 115VAC, Board
- Input 120VAC 60Hz, 4.5 amp
- 24VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
$233.19Low Price Guarantee - $69.99SKU: V-LIT-B3
Vosker V-LIT-B3 Rechargeable Lithium Battery Pack for VOSKER V300
- Compatible with VOSKER V300 security camera
- Type-C USB port
- Voltage: 3.7V
- Capacity: 14 000mAh
$69.99Low Price Guarantee - $1,329.95SKU: POE1236-ATUS
Pelco POE1236-ATUS 12 Port 36W POE Midspan
- High Power over 2-pairs - 36W per port
- PowerView Pro secure, remote SNMPv3 and Cloud-based management
- Safe & reliable power over existing Ethernet infrastructure
- Cisco and legacy PoE support (dongles required)
- Plug-and-play installation
$1,329.95Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
