Camera Brackets
- $48.00SKU: MNT-IPMINIDOME-WALL-B-V2
ICRealtime MNT-IPMINIDOME-WALL-B-V2 Black Wall Mount Bracket for Mini IP Dome Cameras
- Black Waterproof Wall Mount Bracket – Rugged, Installer-Ready Upgrade
- Rugged performance – Withstands high heat, humidity, vibration, and corrosive conditions
- Installer-ready kit – Ships with screws, anchors, and a wrench for fast setup
- Compact yet strong – Supports up to 2.2 lbs (1 kg) with lightweight aluminum alloy + SGCC build
- All-weather durability – Operates from -40°F to +140°F (-40°C to +60°C) at <90% humidity
$48.00Low Price Guarantee - $46.00SKU: MNT-IPMINIDOME-WALL-4-B
ICRealtime MNT-IPMINIDOME-WALL-4-B Black Wall Mount Bracket for Wedge and Varifocal Turret Cameras
- Wall mount bracket for dome cameras; Black finish
$46.00Low Price Guarantee - $48.00SKU: MNT-IPMINIDOME-WALL-2-V2
ICRealtime MNT-IPMINIDOME-WALL-2-V2 Wall Mount Bracket for Mini Eyeball Dome Cameras
- White Waterproof Wall Mount Bracket – Versatile, Rugged, Installer-Ready
- Versatile fit – Compatible with a variety of small dome cameras, not limited to one series
- Installer-ready kit – Includes screws, anchors, and a wrench for quick setup
- Rugged design – Built to withstand heat, humidity, vibration, and corrosive conditions
- Compact strength – Supports up to 2.2 lbs (1 kg) with lightweight aluminum alloy + SGCC construction
$48.00Low Price Guarantee - $50.00SKU: MNT-DVIR-B-V2
ICRealtime MNT-DVIR-B-V2 Black Wall Mount Adapter for Full-Size Vandal Dome Cameras
- Adapter for ceiling or wall mounts, Black
- Aesthetic Design
- Mount Adaptor
- Material: Aluminum
- Compatible with Vandal Dome cameras. See accessory selector
$50.00Low Price Guarantee - $62.00SKU: MNT-ARM-B-V2
ICRealtime MNT-ARM-B-V2 Black Wall Mount Arm with Integrated Junction Box
- Wall Mount Bracket with IP66 Junction Box
- Aesthetic design
- Material: Aluminum
- Wall mount bracket with built-in IP66 junction box
- Fits medium sized dome cameras and PTZs with adaptors
$62.00Low Price Guarantee - $68.00SKU: MNT-ADAPT-SM-3
ICRealtime MNT-ADAPT-SM-3 Adapter Plate and Mount for Mini PTZ Cameras with IR Illuminators
- Adapter Plate and Mount for Mini IR PTZ
- Material: Aluminum alloy with anti-corrosion protection — built for tough climates
- Dimensions: Ø134.1 mm × 83.5 mm (5.3" × 3.3") — compact size for clean installs
- Weight: 0.30 kg (0.66 lb) — lightweight and easy to handle
- Load Capacity: 1.0 kg (2.2 lb) — stable support for compatible Mini IR PTZ cameras
$68.00Low Price Guarantee - $76.00SKU: MNT-ADAPT-SM-2-B
ICRealtime MNT-ADAPT-SM-2-B Black Adapter Plate and Mount for Dome Cameras and Pano Turret Cameras
- Adapter Plate and Mount for Dome and Eyeball Turret cameras in a Black, painted finish
- Sleek, Black, Aesthetic Design
- Mount adapter and plate included
- Aluminum construction
- Compatible with Eyeball Turret and Mid-Sized Dome IP cameras such as IPFX-D40V-IRB3
$76.00Low Price Guarantee - $76.00SKU: MNT-ADAPT-SM-2
ICRealtime MNT-ADAPT-SM-2 Adapter Plate and Mount for Dome Cameras and Pano Turret Cameras
- Aesthetic Design
- Mount adapter and plate included
- Material: Aluminum
- Compatible with Wedge and Mid-Sized Dome IP cameras
$76.00Low Price Guarantee - Aesthetic Design
- $635.92SKU: NDA-7100-PA2H
IQSight by Bosch NDA-7100-PA2H Wall Arm & PSU for AD7100i 230VAC
- Aluminum enclosure rated to IP66 to prevent dust and water ingress
- IK10 impact rating ensures enclosure integrity
- 230 VAC transformer
- For applications without PoE or for redundant power applications with PoE
$635.92Low Price Guarantee - $40.81SKU: NDA-7042-WP
IQSight by Bosch NDA-7042-WP Weather Protector, Flexidome Dual
- Corrosion-resistant finish
- Easy installation
- Stylish and robust design allowing use in all environments
- Protects against rain, dirt and sun
$40.81Low Price Guarantee - $87.14SKU: M-WM-JB-V2
Panasonic M-WM-JB-V2 Fixed Dome Outdoor Wall Mount with Junction Box for M-87-V
- Wall mountable
- Outdoor
$87.14Low Price Guarantee - $150.98SKU: WV-QWL506-B
Panasonic WV-QWL506-B 4-Screw Wall Mount Bracket, Black
- Die-cast aluminum with black powder-coat finish: Resists oxidation and UV degradation over extended outdoor life. In coastal, high-humidity, or chemically aggressive environments, standard steel brackets typically fail within 2–3 years; aluminum housings in the WV-QWL506-B class retain structural integrity for 5–7+ years without re-coating. The black finish also reduces visual glint that can draw attention to surveillance equipment on building exteriors
- 4-screw mounting configuration: Distributes load across four anchor points instead of two, reducing strain on individual fasteners and preventing camera sag or rotation over time. Particularly important in high-vibration environments — adjacent HVAC vents, machinery, or seismic zones — where two-screw mounts can loosen within 6–12 months under constant micro-motion
- Compatible with wall and pole installations on concrete, masonry, steel, and wood: Simplifies site planning since you can deploy on existing structural surfaces without custom adapters or rework. Concrete and masonry require appropriate anchors (not supplied with the bracket); steel and wood use standard fasteners. This flexibility reduces lead time on mixed-material facility exteriors
$150.98Low Price Guarantee - $28.66SKU: IBV-DB-BKT-LR-IBV-CHIME
Napco IBV-DB-BKT-LR-IBV-CHIME Bracket for IBV-DBELL, Provides Left/Right Angle, 2 PCS
- Designed for use with Napco IBV-DBELL doorbell systems
- Provides left/right angle adjustment for flexible positioning
- Includes 2 bracket pieces for convenient installation
- Helps optimize doorbell viewing angle and placement
- Durable construction for dependable performance
$28.66Low Price Guarantee - $28.66SKU: IBV-DB-BKT-TILT-IBV-CHIME
Napco IBV-DB-BKT-TILT-IBV-CHIME Bracket for IBV-Dbell, Provides Up/Down Tilt, 2 PCS
- Provides precise up/down tilt to optimize doorbell chime alignment and sound projection
- Compatible with Napco Security Technologies doorbell chimes for seamless integration
- Simple, low-voltage installation reduces labor time and simplifies field service
- Durable construction ensures reliable performance in commercial and residential security installs
- Improves monitoring and audible coverage for security and surveillance systems
$28.66Low Price Guarantee - $35.14SKU: ISV2-DOME-BOX
Napco ISV2-DOME BOX Round Mounting Box for ISV2-DOME
- Round mounting box accessory for Napco ISV2-DOME series iBridgeVideo dome cameras; provides a finished, professional housing for the camera's cable connections at the ceiling or wall mounting surface
- Round profile matches the ISV2-DOME camera's circular base footprint — the camera mounts directly over the box, concealing the cable entry and connections behind the dome for a seamless, professional installation appearance
- Conceals the camera's network cable, power cable, and any cable slack or junction behind the camera's mounting base — preventing exposed wiring at the camera mounting point
- Optional accessory: the ISV2-DOME can mount without the ISV2-DOME-BOX using a standard electrical box, but the ISV2-DOME-BOX provides the round form-factor finished appearance that completes the dome camera's aesthetic
$35.14Low Price Guarantee - $21.75SKU: ISV2-DOME-BKT
Napco ISV2-DOME BKT Mounting Bracket for ISV2-DOME
- Mounting bracket designed for ISV2-DOME cameras
- Provides secure and stable camera installation
- Supports proper camera positioning for surveillance coverage
- Durable construction for reliable performance
- Enables flexible mounting applications
$21.75Low Price Guarantee - $118.08SKU: IUWM-WN
American Dynamics IUWM-WN Illustra Universal Wall Mount for Small Cameras
- Universal wall mount for small Illustra cameras; white finish; provides wall-surface mounting for small Illustra compact dome, mini dome, and fixed camera bodies
- Wall mount bracket: mounts directly to the wall surface and provides the camera attachment point — the camera body or pendant cap attaches to the mount bracket face; the wall mount provides the stand-off between the wall and the camera for flexible aiming angle
- White finish matches white-housing small Illustra cameras; designed for the load of small Illustra camera bodies; includes all mounting hardware for wall installation on standard construction surfaces
$118.08Low Price Guarantee - $132.48SKU: IUWM-LK-GB
American Dynamics IUWM-LK-GB Greenbase Universal Wall Mount with Junction Box for Large Cameras
- Wall mount with junction box
- For large cameras
- White
$132.48Low Price Guarantee - $88.56SKU: IUWM-LE-GB
American Dynamics IUWM-LE-GB Greenbase Universal Wall Mount for Large Cameras
- Wall mount
- For large cameras
- White
$88.56Low Price Guarantee - $70.00SKU: IUPM-WN
American Dynamics IUPM-WN Illustra Universal Pole Mount for Small Cameras
- Universal pole mount for small Illustra cameras; white finish; enables mounting of small Illustra cameras on round poles and cylindrical structures
- Provides outdoor pole-mounting capability for small Illustra cameras at locations where wall mounting is impractical — fence posts, light poles, thin columns, and perimeter poles in parking and campus environments
- White finish; designed for the lighter load of small Illustra compact dome, mini dome, and fixed camera bodies; standard stainless steel strap secures to pole
- For large camera pole mounting
$70.00Low Price Guarantee - $105.00SKU: IUPM-LE-GB
American Dynamics IUPM-LE-GB Greenbase Universal Pole Mount for Large Cameras
- Universal pole mount for large form factor Illustra cameras; Greenbase compatibility; enables mounting of large Illustra cameras on round poles and cylindrical structures
- Pole mounting provides camera positioning flexibility at outdoor locations where building walls are not accessible — parking lot light poles, sign poles, fence posts, and utility poles are common deployment points for large PTZ and wide-area surveillance cameras
- Heavy-duty bracket rated for the weight and wind load of large Illustra PTZ cameras and enclosures at outdoor pole-mounted positions; stainless steel strap or clamp secures the mount to the pole
- Greenbase ecosystem compatibility; for small camera pole mounting
$105.00Low Price Guarantee - $191.52SKU: IUPK-W6
American Dynamics IUPK-W6 Illustra Universal Pendant Kit for Small Cameras (Includes 7.87"/20cm Pipe)
- Universal pendant kit for small Illustra cameras; includes 7.87" (20cm) pendant pipe, pendant cap (6-inch/IUPC-W6), and mounting hardware; provides a complete pendant ceiling installation solution for small Illustra cameras
- All-in-one pendant kit: the IUPK-W6 includes all hardware required for a standard pendant installation — the pipe, cap, and mounting hardware are pre-matched and guaranteed to be compatible without separate accessory selection
- 7.87" (20cm) standard pipe provides modest stand-off from the ceiling, suitable for standard ceiling heights
$191.52Low Price Guarantee - $260.00SKU: IUPK-EP
American Dynamics IUPK-EP Illustra Extension Pipe for Universal Pendant Kit (IUPK-W6) - Length 3.3 Feet/1 Meter
- Extension pipe for the IUPK-W6 Illustra universal pendant kit for small cameras; length: 3.3 feet (1 meter); threads onto the IUPK-W6 pipe to extend the pendant drop length
- 1-meter extension: the IUPK-EP adds 1 meter of pendant length beyond the IUPK-W6's standard 20cm pipe — providing a total of approximately 1.2 meters of pendant drop from the ceiling mount point; the correct specification for high-ceiling installations where the standard 20cm pendant pipe is insufficient
- Multiple extension pipes can be cascaded to achieve even longer pendant drops; each IUPK-EP provides 1 meter of additional drop
$260.00Low Price Guarantee - $39.78SKU: IUPC-W6
American Dynamics IUPC-W6 Illustra Universal 6" Pendant Cap for Small Cameras
- 6-inch pendant cap for small Illustra cameras; white finish; the decorative shroud covering the pendant pipe-to-camera junction in pendant ceiling installations
- 6-inch vs. 5-inch pendant cap: the 6-inch cap provides a wider collar coverage at the ceiling mount point — the correct choice when the ceiling junction requires a larger-diameter cover, when a wider pipe footprint requires a wider pendant cap, or simply for aesthetic preference
- White finish; the pendant cap conceals cable entry, pipe threading, and mount hardware from below; compatible with small Illustra compact dome, mini dome, and fixed cameras in pendant configuration
$39.78Low Price Guarantee - $35.10SKU: IUPC-W5
American Dynamics IUPC-W5 Illustra Universal 5" Pendant Cap for Small Cameras
- Universal mounting compatibility
- 5-inch diameter design
- Designed for pendant mounting applications
$35.10Low Price Guarantee - $31.59SKU: IUMP-W6
American Dynamics IUMP-W6 Illustra Universal 6" Mount Plate for Small Cameras
- 6-inch mount plate for small Illustra cameras; white finish; flat surface-mount plate with larger footprint than the 5-inch IUMP-W5
- 6-inch diameter covers a wider area on the mounting surface — the correct choice when the mounting surface has a larger conduit knockout, a wider electrical box cutout, or when a larger surface coverage area is required for a neater installation appearance
- Flat plate design: no enclosed box volume; cable passes through the wall or ceiling surface at the mount point; for plate with enclosed junction box
$31.59Low Price Guarantee - $26.73SKU: IUMP-W5
American Dynamics IUMP-W5 Illustra Universal 5" Mount Plate for Small Cameras
- 5-inch mount plate for small Illustra cameras; white finish; flat surface-mount plate providing camera mounting interface without an enclosed junction box body
- Mount plate (vs. junction box): the IUMP-W5 is a flat plate only — there is no enclosure volume for cable management; the camera's cable passes through the wall or ceiling at the mount point rather than being enclosed in a surface box
- The mount plate is the cleaner, lower-profile option for finished interior walls where the cable is run in the wall and exits cleanly at the mount point — producing a very flat, professional installation appearance
$26.73Low Price Guarantee - $52.26SKU: IUJB-W6
American Dynamics IUJB-W6 Illustra Universal 6" Junction Box for Small Cameras
- 6-inch junction box for small Illustra cameras; white finish; surface-mount enclosure with greater internal cable management volume than the 5-inch IUJB-W5
- 6-inch format provides more internal space than the IUJB-W5 — the correct choice when conduit is used (requiring more space for the conduit entry and cable transition), when longer cable slack must be coiled in the box, or when multiple conductor connections are required at the mount point
- White finish; the camera mounts to the front face of the junction box; compatible with the same small Illustra cameras as IUJB-W5
$52.26Low Price Guarantee - $48.36SKU: IUJB-W5
American Dynamics IUJB-W5 Illustra Universal 5" Junction Box for Small Cameras
- 5-inch junction box for small Illustra cameras; white finish; surface-mount enclosure providing weatherproof cable management at the camera installation point
- The junction box provides the cable entry point and connection enclosure for the camera's network and power cables — the camera mounts to the front face of the junction box, concealing all connections within the box body
- 5-inch format: the smaller of the two Illustra junction box options (5" and 6"); the 5-inch box provides adequate internal volume for standard Cat6 and cable terminations in most small camera installations
- White finish; for the 6-inch version providing more cable volume
$48.36Low Price Guarantee - $70.00SKU: IUCM-WN
American Dynamics IUCM-WN Illustra Universal Corner Mount for Small Cameras
- Universal corner mount for small Illustra cameras; white finish; enables small Illustra cameras to be mounted at external 90° wall corners for dual-plane coverage
- Corner mounting provides the optimal position for coverage of two perpendicular wall planes from a single compact camera installation — minimizing camera count and cable runs for corner surveillance
- White finish matches white-housing small Illustra cameras; designed for the lighter load of small compact dome, mini dome, and fixed camera bodies
$70.00Low Price Guarantee - $92.16SKU: IUCM-LE-GB
American Dynamics IUCM-LE-GB Greenbase Universal Corner Mount for Large Cameras
- Universal corner mount for large form factor Illustra cameras; Greenbase compatibility; enables camera mounting at external 90° wall corners
- Corner mounting positions the camera at the geometric optimal point for covering two perpendicular wall planes simultaneously — one camera at a building corner covers the same ground-level area as two wall-mounted cameras aimed in each wall's direction
- Heavy-duty bracket rated for the weight and wind load of large Illustra PTZ cameras and large dome enclosures; Greenbase ecosystem compatibility for future camera upgrade flexibility
$92.16Low Price Guarantee - $183.60SKU: IUCL-LK-GB
American Dynamics IUCL-LK-GB Greenbase Universal Ceiling Mount with Junction Box for Large Cameras
- Universal ceiling mount with integrated junction box for large form factor Illustra cameras; Greenbase compatibility; the junction box provides weatherproof cable management at the ceiling mount point
- Integrated junction box: the camera's network and power cable connections are enclosed within the mount's integral box above the ceiling attachment — creating a finished, weatherproof appearance at the ceiling-to-mount interface without exposed wiring or junction box covers visible below
- Preferred over IUCL-LE-GB for outdoor ceiling installations
$183.60Low Price Guarantee - $99.36SKU: IUCL-LE-GB
American Dynamics IUCL-LE-GB Greenbase Universal Ceiling Mount for Large Cameras
- Universal ceiling mount for large form factor Illustra cameras; Greenbase compatibility; mounts large Illustra cameras including PTZ and large dome configurations from ceiling surfaces
- Ceiling mount (pendant) configuration: the IUCL-LE-GB attaches to the ceiling and the camera hangs below — the preferred mounting position for PTZ cameras covering large interior spaces, atriums, and open commercial floors where the PTZ must pan unobstructed through 360°
- Greenbase compatibility ensures forward-compatible integration with the Illustra Universal mounting ecosystem — the mount base can support future camera upgrades without requiring a new ceiling mount bracket
$99.36Low Price Guarantee - $110.16SKU: IPRM-MT
American Dynamics IPRM-MT Illustra Pro Generation 5 Panoramic Recessed Mount
- Recessed mount for Illustra Pro Generation 5 panoramic cameras; enables flush recessed installation of the Gen 5 panoramic camera through a suspended ceiling tile
- Panoramic cameras benefit particularly from ceiling-recessed installation as the 180° or 360° panoramic coverage zone extends horizontally across the floor beneath the camera — ceiling-flush installation ensures no part of the housing obstructs the wide-angle coverage zone
- Panoramic (MT) specific: the IPRM-MT is dimensioned for the Gen 5 panoramic housing; for multisensor recessed installation
$110.16Low Price Guarantee - $125.28SKU: IPRM-MQ
American Dynamics IPRM-MQ Illustra Pro Generation 5 Multisensor Recessed Mount
- Recessed mount for Illustra Pro Generation 5 multisensor cameras; enables flush recessed installation of the Gen 5 multisensor camera through a drop ceiling tile or suspended ceiling grid
- Recessed installation provides the most architecturally integrated camera deployment — the multisensor camera body is concealed above the ceiling tile with only the lens array and housing dome visible below; consistent with ceiling surface for minimal visual impact
- Multisensor (MQ) specific: the IPRM-MQ is dimensioned for the Gen 5 multisensor housing footprint
$125.28Low Price Guarantee - $170.00SKU: IPPC-MT
American Dynamics IPPC-MT Illustra Pro Generation 5 Panoramic Pendant Cap
- Pendant cap for Illustra Pro Generation 5 panoramic cameras; the decorative shroud covering the pendant pipe-to-camera junction in pendant ceiling installations of the Gen 5 panoramic camera
- The pendant cap provides a finished appearance at the overhead camera mount, concealing wiring and hardware from view from below — important for exposed-ceiling architectural environments
- Panoramic (MT) specific: the IPPC-MT is dimensioned for the Gen 5 panoramic housing collar profile; for multisensor pendant installations
$170.00Low Price Guarantee - $139.68SKU: IPPC-MQ
American Dynamics IPPC-MQ Illustra Pro Generation 5 Multisensor Pendant Cap
- Pendant cap for Illustra Pro Generation 5 multisensor cameras; the decorative shroud covering the pendant pipe-to-camera connection in pendant ceiling installations
- The pendant cap slides over the pendant pipe and attaches to the base of the multisensor camera housing, concealing the cable entry, mount hardware, and pipe-to-camera junction from view below
- Multisensor (MQ) specific: the IPPC-MQ is shaped for the Gen 5 multisensor housing collar; do not substitute the IPPC-MT panoramic pendant cap
$139.68Low Price Guarantee - $44.46SKU: IPMP-MD
American Dynamics IPMP-MD Illustra Pro Mount Plate for Mini Dome Cameras
- Mount plate for Illustra Pro mini dome cameras; provides the mounting interface between the Illustra Pro mini dome camera body and a standard ceiling or wall electrical box
- Pro-series specific: the IPMP-MD is sized for Illustra Pro mini dome cameras, which have a larger body profile than Illustra Flex mini dome cameras — do not substitute IFMP-ID or IFMP-OD Flex series plates
- The mount plate connects to the standard electrical box and provides the surface to which the mini dome camera base ring attaches — the plate is the intermediary hardware that makes the camera installation box-mount compatible
$44.46Low Price Guarantee - $29.16SKU: IPMP-FE
American Dynamics IPMP-FE Pro Mount Plate for Fisheye Cameras
- Mount plate for Illustra Pro fisheye cameras; provides the ceiling or wall mounting interface for the Illustra Pro fisheye camera's circular body
- Fisheye-specific mount plate: the IPMP-FE is dimensioned for the Pro fisheye camera's circular housing footprint — ensuring the camera is centered correctly on the mount plate for the fisheye lens's full hemispherical coverage zone to be unobstructed
- The fisheye mount plate must position the camera precisely at the ceiling surface for the dewarping software to produce correctly aligned perspective views — off-center or angled mounting degrades dewarped image quality
$29.16Low Price Guarantee - $25.11SKU: IPMP-CD
American Dynamics IPMP-CD Illustra Pro Mount Plate for Compact Cameras
- Mount plate for Illustra Pro compact dome cameras; provides the mounting interface between the Illustra Pro compact camera body and a standard indoor ceiling or wall electrical box
- Illustra Pro series compact cameras use a different body profile than the Illustra Flex compact cameras — the IPMP-CD is the correct plate for Pro compact cameras; do not substitute IFMP-CD (Flex compact) plates
- Standard single-gang electrical box compatible; provides a stable, flat mounting surface for the Pro compact camera body in ceiling or wall indoor installations
$25.11Low Price Guarantee - $12.00SKU: IPCA-MT
American Dynamics IPCA-MT Illustra Pro Generation 5 Panoramic Conduit Adapter
- Conduit adapter for Illustra Pro Generation 5 panoramic cameras; provides a conduit-to-camera cable entry interface for panoramic camera installations wired via rigid conduit
- Panoramic (MT) specific: the IPCA-MT is sized and configured for the Illustra Pro Gen 5 panoramic camera housing — do not substitute the IPCA-MQ multisensor adapter, which is dimensioned for the different multisensor housing footprint
- Enables the Illustra Pro Gen 5 panoramic camera to be integrated into conduit-wired installations in compliance with commercial building codes that require conduit protection for exposed camera wiring
$12.00Low Price Guarantee - $12.00SKU: IPCA-MQ
American Dynamics IPCA-MQ Illustra Pro Generation 5 Multisensor Conduit Adapter
- Conduit adapter for Illustra Pro Generation 5 multisensor cameras; provides a conduit-to-camera cable entry interface for installations where the camera is wired via rigid conduit rather than free cable
- Multisensor (MQ) specific: the IPCA-MQ is dimensioned and configured for the Illustra Pro Gen 5 multisensor camera housing, which differs from the panoramic (MT) housing — do not substitute the IPCA-MT conduit adapter
- Conduit wiring is required in many commercial and institutional code jurisdictions for exposed and in-ceiling camera installations
$12.00Low Price Guarantee - $29.16SKU: IFMP-OD
American Dynamics IFMP-OD Illustra Flex Mount Plate for Mini Dome Outdoor Cameras
- Mount plate for Illustra Flex outdoor mini dome cameras; provides the weatherproof mounting interface between the Illustra Flex outdoor mini dome body and an outdoor-rated mounting surface
- Outdoor-rated: the IFMP-OD incorporates weatherproofing at the camera-to-plate interface for outdoor installation — the cable entry point and plate-to-surface sealing are designed to prevent moisture ingress at the mount base; the indoor IFMP-ID does not provide this protection
- Outdoor mini dome cameras require the outdoor-specific mount plate for correct IP66/IP67 weatherproofing compliance — installing an outdoor camera on an indoor mount plate can compromise the system's IP rating at the mount junction
$29.16Low Price Guarantee - $30.00SKU: IFMP-ID
American Dynamics IFMP-ID Illustra Flex Mount Plate for Mini Dome Indoor Cameras
- Mount plate for Illustra Flex indoor mini dome cameras; provides the mounting interface between the Illustra Flex indoor mini dome body and a standard indoor ceiling or wall electrical box
- Indoor-specific design: the IFMP-ID is the correct plate for indoor-rated Illustra Flex mini dome cameras — indoor mount plates are not weatherproofed and must not be used with outdoor cameras in exterior installations
- Mini dome mount plates differ from compact camera mount plates — confirm the IFMP-ID is the correct plate for the specific Illustra Flex indoor mini dome model before ordering; do not substitute the outdoor IFMP-OD or the compact IFMP-CD
$30.00Low Price Guarantee - $30.00SKU: IFMP-CD
American Dynamics IFMP-CD Illustra Flex Mount Plate for Compact Cameras
- Mount plate for Illustra Flex compact cameras; provides the interface between the Illustra Flex compact camera body and a ceiling, wall, or electrical box mounting surface
- The mount plate attaches directly to the flat mounting surface or to a standard single-gang electrical box, providing the camera body with a stable, secure base for ceiling or wall installation
- Illustra Flex compact cameras require their specific mount plate (IFMP-CD) rather than the mini dome mount plates — the compact camera body profile and mounting footprint differ from the mini dome series
$30.00Low Price Guarantee - $499.00SKU: CX-XTND-G3
Flir CX-XTND-G3 Extendable Gooseneck Mount for CP-640x PTZs
- CX-XTND-G3 extendable gooseneck mount kit. Comes with cable box and wall mount plate (1.5 in. PF inner thread)
- Dimensions (L × W × H) are 900 – 1140 × 256 × 975 mm
- Weighs 12.29 kg
- Can be used with FMS00003238 PF-NPT Adapter
$499.00Low Price Guarantee - $95.85SKU: PMAX-0542
ACTi PMAX-0542 Horizontal Pole Mount (for A966, A967, A967B, A967B-2MP, A972)
- Horizontal pole mount bracket for ACTi A966, A967, A967B, A967B-2MP, and A972 camera models; mounts cameras to round poles and cylindrical structures for outdoor perimeter and wide-area surveillance
- Pole mounting is the preferred installation method at parking lot poles, light poles, utility poles, and fence posts where wall mounting is not practical — provides camera elevation and positioning flexibility independent of building wall availability
- Compatible with the same A-series camera model range as the PMAX-0135 pendant mount — allowing the installer to choose between pendant and pole mounting for these cameras based on the specific deployment geometry
$95.85Low Price Guarantee - $36.95SKU: PMAX-0360
ACTi PMAX-0360 Tilted Wall Mount (for A912)
- Designed for ACTi A912 Camera
- Tilted Wall Mount
$36.95Low Price Guarantee - $125.55SKU: PMAX-0135
ACTi PMAX-0135 Pendant Mount (for A966, A967, A967B, A967B-2MP, A972, A973)
- Pendant mount bracket for ACTi A966, A967, A967B, A967B-2MP, A972, and A973 camera models; positions cameras in pendant (hanging) configuration from a ceiling conduit or pipe drop
- Compatible with multiple A-series PTZ and specialty camera models — a single mount accessory serving a range of compatible camera models reduces mounting hardware inventory requirements for installers working with multiple A-series models
- ACTi OEM mount ensuring correct dimensional fit and load rating for the listed camera models; consult the ACTi mounting selector tool for compatibility confirmation and pipe thread specifications
$125.55Low Price Guarantee - $52.95$52.95Low Price Guarantee
- $56.00SKU: SGA-POLE-EX
ENS SGA-POLE-EX SG Pole Extension Arm 300mm
- Compatible with SGA-POL36 and SGP-POLE6poles
- Camera pole installation bracket
- Internal wiring design (with built-in cable storage)
- Easy installation and maintenance
- Support quick installation of PTZ cameras
$56.00Low Price Guarantee - $18.00SKU: AC-BRACKET
ENS AC-BRACKET Frosted Surface Junction Box for AC-06 and AC-07, 115 x 70mm
- Frosted finish: the translucent/frosted surface aesthetic gives the junction box a premium, modern appearance that complements the AC-06/AC-07 glass-face reader aesthetic — more refined than a standard electrical box cover
- Surface-mount format: mounts directly to the wall without a wall cutout; the AC-06 or AC-07 reader mounts to the face of the junction box, concealing the wiring connections behind the reader
- 115 × 70mm dimensions are matched to the AC-06 and AC-07 reader mounting footprint — genuine ENS/Akuvox accessory ensuring correct fit
$18.00Low Price Guarantee - $14.00SKU: 7152X
ENS 7152X 3/4 Weatherproof Box Outlets Single Gang 5 Hole
- 3/4" trade size weatherproof single-gang aluminum outlet box; five conduit entry knockouts for flexible conduit routing; accepts 3/4" EMT or rigid conduit
- Five-knockout flexible entry: knockouts on multiple box faces allow the conduit to enter from the most convenient direction for the installed conduit run
- 3/4" hub accommodates the larger conduit fill of 3/4" EMT — the correct box when the conduit feeding the outlet point is 3/4" rather than 1/2"
- Single-gang; aluminum construction; for 1/2" conduit
$14.00Low Price Guarantee - $15.00SKU: 7151X
ENS 7151X 1/2 Weatherproof Box Outlets Single Gang 5 Hole
- 1/2" trade size weatherproof single-gang aluminum outlet box; five conduit entry knockouts (5 Hole) for flexible conduit routing direction; accepts 1/2" EMT or rigid conduit
- Five-knockout design: provides knockout locations on multiple box faces — top, bottom, left, right, and back — allowing the conduit to enter the box from whichever direction the conduit routing requires, without needing a specific box orientation
- Single-gang: accepts one standard device (receptacle, keystone, switch, or blank cover) behind a weatherproof cover plate; aluminum construction for outdoor corrosion resistance
- Standard single-gang weatherproof box for outdoor security camera power points
$15.00Low Price Guarantee - $1.90SKU: ENS-7511
ENS 7511 4" Round Ceiling Closure Plate Aluminum
- 4" round aluminum ceiling closure plate; mounts over a standard 4" round ceiling or wall electrical box to seal and cover the box opening flush with the ceiling or wall surface
- Aluminum construction provides corrosion resistance for use in damp, outdoor, and corrosive environment ceiling installations; flat plate profile sits flush against the ceiling surface for a clean appearance
- Standard screw mounting directly to the 4" round box; compatible with both indoor and outdoor 4" round box configurations
$1.90Low Price Guarantee - $1.90SKU: 7471
ENS 7471 Weatherproof Single Gang Device Mount Cover Blank
- Blank weatherproof cover plate for single-gang weatherproof electrical boxes; seals the box opening with a weatherproof gasket seal — no device opening, no device mount features; blank closure only
- Used when a conduit-fed box is installed but no device is currently connected, when a box is taken out of service and must be sealed, or as a placeholder during rough-in when the final device has not yet been selected
- Aluminum construction
$1.90Low Price Guarantee - $54.93SKU: 7302
ENS 7302 3/4 Weatherproof Boxes Double Gang 4" Round Box Aluminum
- 3/4" trade size weatherproof aluminum double-gang 4" round junction/device box; for outdoor exposed 3/4" EMT conduit installations
- 3/4" conduit entry hubs accommodate 3/4" EMT or rigid conduit connections — the correct box when the camera or device conduit run uses 3/4" conduit for higher conductor fill
- Aluminum construction for corrosion resistance in outdoor, wet, and coastal installations; double-gang capacity for two devices or a combination of device and blank cover
$54.93Low Price Guarantee - $54.93SKU: 7301
ENS 7301 1/2 Weatherproof Boxes Double Gang 4" Round Box Aluminum
- 1/2" trade size weatherproof aluminum double-gang 4" round junction/device box; designed for outdoor exposed conduit installations
- 1/2" conduit entry: pre-drilled or tapped 1/2" hubs accommodate 1/2" EMT or rigid conduit connections; aluminum construction resists corrosion in outdoor, coastal, and wet-environment installations
- Double-gang: accommodates two devices (receptacles, switches, keystone inserts) side-by-side in a standard double-gang configuration for outdoor installation points
$54.93Low Price Guarantee - $74.00SKU: BRACKET13-W
ENS BRACKET13-W Wall Mount for IP-5PT4IEN8-4X
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the bracket so that the installation look more elegant
- Wall mounting bracket for dome cameras
- Dust-proof design
$74.00Low Price Guarantee - $60.00SKU: B15-W
ENS B15-W Waterproof Junction Box B15-W for IP-5VPXXX3/MZ
- Aluminum alloy material with a surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Wall or ceiling mounting
- Water-proof design
$60.00Low Price Guarantee - $50.00SKU: PTM-512
ENS PTM-512 Pendant Mount for IP-5DT8E3N2-36
- Designed for IP-5DT8E3N2-36 Camera: Engineered for precise compatibility and secure mounting
- Durable Construction: Made from high-quality materials to provide long-lasting support and reliability
- Versatile Mounting Options: Suitable for pendant or ceiling installations to fit various surveillance requirements
- Optimized Camera Positioning: Enables proper placement for optimal camera coverage and performance
- Easy Installation: Designed for quick and straightforward setup with the specified camera model
$50.00Low Price Guarantee - $38.00SKU: PTM-506
ENS PTM-506 Pendant Mount for IP-5IRD, IP-5VP
- Pendant mount bracket for ENS IP-5IRD series IR dome cameras and IP-5VP series varifocal cameras; provides the mounting interface for pendant (pipe-drop) ceiling installation
- Pendant mounting positions the camera hanging below the ceiling surface, providing the correct downward viewing angle for coverage of the area directly beneath — the preferred configuration for high-ceiling warehouses, atriums, and production floors
- Metal construction provides structural rigidity and corrosion resistance for permanent overhead camera installation
$38.00Low Price Guarantee - $65.00SKU: PM-215
ENS PM-215 Pole Mount
- Pole or lamppost Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 163,3 (W) x 54,5 (D)
- Suitable for Inside / Outside
- Allows the internal cabling
$65.00Low Price Guarantee - $54.00SKU: PFB5203C
ENS PFB5203C In-Ceiling Mount Bracket
- The screws are embedded in the frame and the camera neatly installed into its bracket without hindering its visual range
- Easy to disassemble and maintain
- Easy to install and aesthetically pleasing
- The bracket is stable, as it firmly secures the camera in position on the ceiling
$54.00Low Price Guarantee - $56.00SKU: PFB2212C
ENS PFB2212C Universal Adjustable Pendent Brackets, 815-1500mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 815 to 1500 mm
$56.00Low Price Guarantee - $50.00SKU: PFB2211C
ENS PFB2211C Universal Adjustable Pendent Brackets, 475-800mm
- Built of aluminum alloy and SECC material, it is cost-effective
- With its internal wiring, it is compact and suitable for a variety of cameras
- It can be scaled from 475 to 800 mm
$50.00Low Price Guarantee - $42.00SKU: PFB2204W
ENS PFB2204W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W-B
ENS PFB2203W-B Weather Proof Wall Mount Bracket, Black
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $42.00SKU: PFB2203W
ENS PFB2203W Weather Proof Wall Mount Bracket
- Built of aluminum alloy and SGCC material
- Suitable for a variety of cameras and is elegant
$42.00Low Price Guarantee - $278.00SKU: PFA6400S
ENS PFA6400S Power Box for PTZ Wall Mount
- Made from aluminum alloy and SECC steel
- IP66 rated
- Easy to install, it supports the wall mount, pole mount and corner mount installation methods
- Highly adaptable, it can be used with PTZ cameras and IPCs
- Large enclosure that can accommodate many types of power adapters
$278.00Low Price Guarantee - $44.00SKU: PFA5300R
ENS PFA5300R Junction Box for Diamond Dual Lens Turret
- G3/4" Pipe Thread
- IP66 Ingress Protection
- 6.6 lb Load Capacity
- Aluminum Construction
$44.00Low Price Guarantee - $28.00SKU: PFA109
ENS PFA109 Pendent Mount Adapter
- Aluminum alloy material
- Matched with particular cameras, beautiful and elegant designed
$28.00Low Price Guarantee - $98.00SKU: ES1271ZJ-120
ENS ES1271ZJ-120 Pendant Mounting Bracket for Mini Dome Camera
- Suitable for dome camera pendant mounting
- Aluminum alloy material with a surface spray treatment
- Waterproof rubber suits for indoor/outdoor design
- The internal wiring makes the feature looks better
- The outlet hole is reserved for convenient wiring indoor
$98.00Low Price Guarantee - $18.00SKU: ES1250ZJ
ENS ES1250ZJ Rain Shade for Outdoor Dome Camera
- Plastic material with good tenacity and high reliability
- Water chute design for preventing rainwater from flowing to the camera housing
- Prevent direct sunlight and improve image quality
- Rain protection and six-level windproof
- Weaken the possibility of freezing
$18.00Low Price Guarantee - $60.00SKU: CRM-215
ENS CRM-215 Corner Mount Bracket
- Corner Mount
- Bracket for bullet and PTZ Cameras
- 215 (H) x 215,1 (W) x 121,4 (D)
- Suitable for Inside / Outside
- Colour: White
$60.00Low Price Guarantee - $75.00SKU: CEM-139W
ENS CEM-139W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $49.00SKU: CEM-131W
ENS CEM-131W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Ceiling mounting bracket for fisheye cameras
$49.00Low Price Guarantee - $75.00SKU: CEM-118W
ENS CEM-118W Ceiling Mount
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $80.00SKU: BRACKET14-W
ENS BRACKET14-W Wall Mount Arm with Pole Mount for 360° Multi Sensor
- Wall mount arm with integrated pole-mount capability for ENS 360° multi-sensor panoramic cameras; provides mounting to both flat wall surfaces and round poles or pipes
- Designed for multi-sensor panoramic cameras that require a specific mounting geometry to achieve their full 360° horizontal field of view — the camera must be positioned away from the wall surface to prevent the wall from blocking portions of the panoramic coverage zone
- Wall arm standoff provides the necessary clearance between the camera and the mounting surface; pole mount capability allows installation on light poles, sign posts, and other round structures commonly available at outdoor surveillance locations
- White finish; genuine ENS OEM bracket engineered for the specific multi-sensor camera models in the ENS lineup
$80.00Low Price Guarantee - $29.00SKU: B-131W
ENS B-131W Junction Box
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$29.00Low Price Guarantee - $45.00SKU: AR-38W
ENS AR-38W Arm
- Aluminum alloy material with surface spray treatment
- Wall mounting bracket for PTZ cameras
$45.00Low Price Guarantee - $75.00SKU: AR-139W
ENS AR-139W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $49.00SKU: AR-131W
ENS AR-131W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the bracket so that the installation look more elegant
- Wall mounting bracket for fisheye cameras
$49.00Low Price Guarantee - $75.00SKU: AR-118W
ENS AR-118W Arm
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$75.00Low Price Guarantee - $42.00SKU: WP-139W
ENS WP-139W Waterproof Junction Box for IP-5IRDXXX5/MZ & IP-5IRXXX3/MZ
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$42.00Low Price Guarantee - $40.00SKU: WP-139G
ENS WP-139G Waterproof Grey
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$40.00Low Price Guarantee - $37.00SKU: WP-118W
ENS WP-118W Waterproof Junction Box for IP-5IRDXXX4/28 & IP-5IRXXX2(1)/28
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$37.00Low Price Guarantee - $36.00SKU: WP-118G
ENS WP-118G Waterproof Grey
- Aluminum alloy material with surface spray treatment
- Camera cables can be perfectly collected to the junction box so that the installation looks more elegant
- Bottom inlet and side inlet
- Available for wall or ceiling mounting
- Water-proof design
$36.00Low Price Guarantee - $64.09SKU: SHD-1000F1
Hanwha Vision SHD-1000F1 In-ceiling Mount Compatible with QNF-8010/9010, QNF-C9010
- Color : White
- Materials : PC(Polycarbonate)
- Dimensions (WXH) : ø137x131mm (ø5.39x5.15"), Ceiling hole size : ø119mm (ø4.69")
$64.09Low Price Guarantee - $24.27SKU: SBP-215C
Hanwha Vision SBP-215C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 225.66(W)x145.66(D)x10(H)/ 65g (0.11lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-180C
Hanwha Vision SBP-180C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 190.65(W)x190.65(D)x10(H)/ 69g (0.15lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-160C
Hanwha Vision SBP-160C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 170.65(W)x170.65(D)x10(H)/ 54g (0.11lb)
$24.27Low Price Guarantee - $24.27SKU: SBP-140C
Hanwha Vision SBP-140C Mounting Hole Cover for SBP-250WMW & SBP-400WMW
- Color : White
- Material : PC(Polycarbonate)
- Product dimensions / weight : 150.65(W)x150.65(D)x10(H) / 40g (0.08lb)
$24.27Low Price Guarantee - $304.50SKU: SBP-004WMW
Hanwha Vision SBP-004WMW Wall Mount Compatible with TNP Ruggedised PTZ Positioning Cameras
- Color : White
- Product dimensions / weight : 360x210x245mm(14.17x8.27x9.65”) / 3800g(8.38lb)
- Mount screw size : TR30
- Max. load : 15kg
- Reversible design for all installation mode-upright, canted, inverted
$304.50Low Price Guarantee - $123.25SKU: SBP-004PBW
Hanwha Vision SBP-004PBW Mounting Converter 4" to 4.75" for TNP Ruggedized PTZ Positioning Cameras
- Color : White
- Product dimensions / weight : 155x155x18mm(6.10x6.10x0.71”), 340g(0.75lb)
- Mount screw size : TR30
- Universal 4"(101.6mm) PCD Mounting converter for 4.75"(120.65mm) PCD Holes
- Compatible model : TNP-A6550RW, TNP-A7430RW, TNP-A9430RW
$123.25Low Price Guarantee - $73.08SKU: SBO-BPM0
Hanwha Vision SBO-BPM0 Pivot Bracket for Mono BCR Cameras
- Material: Stainless(SUS316L)
- Mount Screw size(Hexagonal screw): 6mm
- Max. load: 5kg
- Adjustment Angle: 0 ~ 120°
- Supported products: TNS-7000M
$73.08Low Price Guarantee - $359.00SKU: Z-BRACKET
Dotworkz Z-BRACKET Modular Non-Penetrating Wall and Corner Mount System
- Non-penetrating mounting system using mechanical pressure
- Dual configuration support: straight-wall and corner-wall installation
- Supports small, large, and extra-large (combined) arm sets for variable span requirements
- Three-axis leveling support with bubble levels
- Compatible with multiple commercial mounting patterns for Dotworkz housings and many Axis products
$359.00Low Price Guarantee - $40.62SKU: PMT1B
Speco PMT1B Pole Mount for Select Dome & Bullet Cameras, Black
- For Select Dome \& Bullet Cameras
- Multiple Mounting Holes
- 3 x Adjustable Pole Straps Built-In
- NDAA Compliant
$40.62Low Price Guarantee - $34.19SKU: WMT1B
Speco WMT1B Wall Mount, Black
- Wall mount bracket for Speco cameras including O4B7M, O2BFRM, O8B7M, O2BLP1M, VLD6M, O2VT1V, O4VT1VM, O4T7M, and O8FBMS1; designed for wall-surface installation when ceiling mounting is not practical
- Black finish: matches black housing camera variants for a consistent professional appearance; for white cameras, use the white WMT1 variant; for dark gray cameras, use WMT1G
- Wall mount format: attaches the camera to a flat wall surface, enabling downward and outward viewing angles from the wall — ideal for building exteriors, corridor coverage, parking structure coverage, and building perimeter monitoring
- Genuine Speco OEM wall mount; NDAA compliant
$34.19Low Price Guarantee - $31.19SKU: O4D6WMG
Speco O4D6WMG Wall Mount, Dark Gray
- Wall mount for select Speco dome cameras including O4D6M, O8D6M, VLDT6, and O4VLD5; designed for use when ceiling installation is not practical
- Wall mount format: mounts the camera to a flat wall surface, angling the camera downward and outward from the wall to provide coverage of the area in front of the wall — ideal for building entrances, parking lot coverage from building walls, and exterior perimeter monitoring
- Adjustable camera positioning allows precise downward angle adjustment to optimize the field of view after mounting
- Genuine Speco OEM mount
$31.19Low Price Guarantee
Filter
Shopping Options
