Installation Tools & Supplies
- $12.00SKU: CC6600-15
ENS CC6600-15 Cat6 Premade Ethernet Cable, 15 Feet
- Pre-terminated Cat6 patch cable; 15-foot (approximately 4.5-meter) length; factory-crimped RJ45 connectors on both ends; ready for immediate use
- 15-foot length is suited for patch panel to switch connections, NVR to PoE switch connections, and short equipment-to-equipment runs within a rack, server closet, or small equipment room
- Supports Cat6 Gigabit Ethernet and PoE/PoE+/PoE++ power delivery without performance degradation; compatible with all ENS NVRs, PoE switches, and network equipment
$12.00Low Price Guarantee - $666.00SKU: CAT6-W-P
ENS CAT6-W-P Cat6 CMP Plenum Ethernet Cable, Bare Copper, UL/ETL Listed, 1000', White
- Cat6 CMP (Communications Multipurpose Plenum) rated Ethernet cable; bare copper 23 AWG solid conductors; UL Listed and ETL Verified; 1000-foot spool; white jacket
- CMP plenum rating: the highest NEC cable jacket rating — required for cable runs in plenum air-handling spaces (above drop ceilings, in raised floor systems) without conduit; CMP jackets are fire-resistant, produce low smoke, and low toxicity when burned
- Bare copper conductors: superior conductivity for full Cat6 Gigabit performance and PoE delivery versus CCA alternatives; consistent with professional installation standards that specify solid bare copper
- UL Listed and ETL Verified
$666.00Low Price Guarantee - $348.00SKU: CAT6-OD
ENS CAT6-OD Cat6 Outdoor Ethernet Cable, Bare Copper, Clear Waterproof Layer, ETL Verified, 1000', Black
- Cat6 outdoor Ethernet cable; clear waterproof layer construction; bare copper 23 AWG solid conductors; unshielded (UTP); ETL Verified; 1000-foot spool; black jacket
- UV-resistant black polyethylene outer jacket: protects the cable from sun damage in installations where the cable is exposed to direct sunlight along some or all of its run
- Bare copper conductors: superior conductivity for Gigabit Ethernet and PoE performance versus copper-clad aluminum (CCA) alternatives, particularly important for longer runs
- ETL Verified to Cat6 standards; suitable for outdoor installation in conduit
$348.00Low Price Guarantee - $450.00SKU: CAT6-DB
ENS CAT6-DB Cat6 Direct Burial Ethernet Cable, Bare Copper, Gel Filled Unshielded, ETL Verified, 1000', Black
- Direct burial rated: the gel filling and heavy-duty polyethylene (PE) jacket protect the cable conductors from groundwater, soil moisture, and UV exposure for permanent underground installation without conduit
- Gel-filled construction: the water-blocking gel fills all voids around the conductors inside the jacket, preventing moisture from wicking along the cable into junction boxes and equipment — the most effective waterproofing method for underground cable
- Bare copper conductors (not CCA): provides superior conductivity, flexibility, and consistent performance over the full 100-meter Cat6 segment length for PoE camera power and Gigabit data
$450.00Low Price Guarantee - $148.00SKU: AWR-500-W
ENS AWR-500-W 22/4 Alarm Wire, CMR, UL Listed, 500 Feet, White
- 22 AWG 4-conductor alarm wire; CMR (Communications Multipurpose Riser) jacket rating; UL Listed; 500-foot spool; white jacket
- 4-conductor cable provides two signal conductors + two power conductors in a single cable — enabling single-cable installation of powered sensors (motion detectors, glass break sensors, smoke detectors) that require both zone connection and 12V power
- White jacket for clean installation appearance in finished spaces; 500-foot spool for medium-to-large residential or commercial alarm system wiring projects; UL Listed for compliance with security installation code requirements
$148.00Low Price Guarantee - $1.60SKU: CW4016-T
ENS CW4016-T Raceway Equal Tee, Rectangular, 1.57" W × 0.63" H
- Equal tee (T-junction) fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; three equal 40 × 16mm openings for splitting or merging raceway runs at a T-junction
- Used when the CW4016 main cable trunk must branch to serve two directions simultaneously
- All three tee openings are the same 40 × 16mm profile; any port can serve as the incoming trunk and either of the other two as the branch outputs
$1.60Low Price Guarantee - $1.60SKU: CW4016-L
ENS CW4016-L Raceway Flat Bend, Rectangular, 1.57" W × 0.63" H
- Flat 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a 90° directional change within the same plane
- Used for same-plane 90° turns — such as routing the main cable trunk along a baseboard and turning left or right at a room corner while remaining flat against the floor-level wall — distinct from inside corner (CW4016-B) and outside corner (CW4016-C) bend fittings
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-L or CW2516-L fittings
- Pre-molded fitting ensures a consistent, professional 90° flat turn without cutting or bending the raceway sections
$1.60Low Price Guarantee - $94.00SKU: CW4016-KIT
ENS CW4016-KIT Raceway Cord Cover Kit, 3.5 Feet (10 Covers), Connectors & Accessories Included
- Complete CW4016 40 × 16mm raceway kit; 10 × raceway cover sections totaling approximately 3.5 feet; end caps, connectors, and bend fittings included for a complete installation without ordering components separately
- 40 × 16mm profile — the largest in the ENS CW series — accommodates three to four cables simultaneously (multiple CAT5/6 and coaxial cables in a single raceway channel); the correct kit for multi-camera main cable trunk runs
- PVC raceway with adhesive backing; white finish; all included fittings are the same 40 × 16mm profile as the CW4016 covers
- For longer or more complex installations
$94.00Low Price Guarantee - $1.60SKU: CW4016-H
ENS CW4016-H Raceway Connector, Rectangular, 1.57" W × 0.63" H
- In-line connector for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; joins two CW4016 sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW4016 sections — prevents cable from being exposed at the joint between pieces
- Essential for multi-section installations where the total cable run exceeds 5 feet; one connector per joint between raceway sections in a straight run
$1.60Low Price Guarantee
Installation Tools & Supplies Frequently Asked Questions
What tools do I need to install a surveillance camera?
To install a surveillance camera, you'll typically need a drill, screwdriver, and various installation tools like cable strippers and crimpers. Additionally, having a level and measuring tape can help ensure proper placement. Depending on the type of camera, you may also need specific cables, connectors, and mounting hardware, which are often included in the camera kit.
How do I choose the right cable for my surveillance system?
The right cable for a surveillance system depends on the camera type and distance from the recording device. Common options include coaxial cables for analog cameras and Ethernet cables for IP cameras. Ensure the cable is compatible with your system's specifications, such as gauge and shielding type, to maintain video quality and prevent interference.
What is the purpose of a keystone jack in surveillance installation?
A keystone jack is used to connect cables in a structured wiring system, providing a secure and organized way to connect surveillance cameras to networking equipment. It allows for easy insertion and removal of cables, facilitating maintenance and upgrades. Using keystone jacks can help manage cable clutter and improve the overall aesthetics of your installation.
Do I need special tools for terminating alarm wire?
Yes, terminating alarm wire requires specific tools, such as a wire stripper, crimper, and possibly a punch-down tool for connecting wires to terminals. These tools ensure proper connections and minimize signal loss, which is crucial for the reliability of your alarm system. Using the right tools can also prevent damage to the wires during the termination process.
What should I consider when selecting installation supplies for my surveillance system?
When selecting installation supplies, consider the type of surveillance system, the environment (indoor or outdoor), and the distance between components. Look for high-quality cables, connectors, and tools that match the specifications of your cameras and recording devices. Additionally, ensure that the supplies are compatible with the installation location to avoid issues like signal loss or physical damage.
Filter
Shopping Options
