Pelco G3515-2PJR3AK Image Pack 650 TVL Box Camera, 3-8.5mm Lens with EH3515-2, EM1450, SS3515

Image Pack Consists of the following Pelco models: EH3515-2, C20-DW-6, 13VDIR3-8.5, EM1450, SS3515.

The C20-DW-6 is an ultra high resolution digital camera with 650 TVL of resolution and 0.13 lux minimum illumination. Camera features include autosensing power; 18 to 32 VAC (Revision A) or 12 VDC with AC line lock or internal synchronization) and automatic gain control (AGC). The C20-DW-6includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to a strong backlight. The C20-DW-6 also uses slow electronic shutter technology to improve the illumination performance for low-light environments. The C20-DW-6 is Pelco’s full-featured digital day/night wide dynamic range (WDR) CCD camera. Its WDR technology provides 120 dB dynamic range and produces superior images over a range of lighting conditions, including extreme backlight conditions. Its day/night technology provides outstanding performance in low lighting conditions. The camera uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change and as the need for infrared sensitivity is realized.

The purpose of Pelco’s 13VDIR3-8.5 is to compensate for the focus shift that results from the different wavelengths of visible and IR light. IR corrected lens focus light energy on the same plane. The result is better focus, sharper contrast, and better overall image quality. IR corrected lens are particularly of benefit to Pelco’s day/night cameras, which “see” both visible and IR light. IR corrected lens allow a camera’s imager to take in visible and IR illumination in “night” conditions (when the IR cut filter is not deployed), while eliminating the problem of IR focus shift.

The EH3515-2 from Pelco is an indoor/outdoor, low cost camera enclosures constructed from die-cast and extruded aluminum. The EH3515-2 has a lower body length of 32.38 cm (12.75 inches) and the EH3515-2 has a lower body length of 40.00 cm (15.75 inches). This enclosure are for use with cameras having fixed focal length lens or motorized zoom lens (with or without auto iris operation). The front hinged lid provides easy access to the removable camerasled. Two adjustable glands (PG13.5) on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

The EM1450 is a light duty wall mount designed manufactured from die-cast aluminum, the EM1450 is capable of supporting a maximum load of 9 kg (20 lb) and can be safely mounted to any vertical load-bearing surface. The EM1450 features a small adjustable mounting head that is unobtrusive and provides ample clearance between the cable feedthrough glands and the mounting head. The EM1450 can also be adapted for pole mount applications when used with our PA101 adapter.

The SS3515 from Pelco is a sun shield for the EH3515/EH3515L from Pelco provides air space between itself and the enclosure. It protects the enclosure from the direct rays of the sun and reduces the internal temperature of the enclosure.

C20-DW-6 Features

• Wide Dynamic Range
• 650 TV Lines
• High Sensitivity
• Day/Night with Automatic or Manual Control
• 1/3-Inch Format CCD Imager
• Digital Signal Processing
• CS Lens Mount
• Autosensing DC Drive Auto Iris
• Automatic/Manual White Balance Settings for Difficult Lighting Situations
• Selectable Automatic Gain Control
• Advanced Backlight Compensation
• Autosensing Power; 18 to 32 VAC/12 VDC with Selectable AC Line Lock/Internal Synchronization (Revision A)
• 3D Digital Noise Reduction (DNR)
• Privacy Zones

13VDIR3-8.5 Features

• Designed for All Day/Night and Monochrome Cameras
• Increased Sharpness in Monochrome Mode
• Focuses IR and Visible Light
• Eliminates the Problem of IR Focus Shift
• Auto Iris, Manual Focus, and Zoom

EH3515-2 Features

• Low Cost
• Small, Contemporary Design
• Die-Cast and Extruded Aluminum Construction
• Forward-Opening Hinged Lid
• Rear Link-Lock Latch
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/Outdoor Applications
• Easy Access for Servicing and Installation
• Models Available with Factory-Installed Low Power Heater, Blower and Defroster, or with Heater and Defroster

EM1450 Features

• Light Duty Wall Mount
• Maximum Load 9 kg (20 lb)
• Adjustable Head for Mechanical Positioning of the Enclosure
• Can Be Adapted for Pole Mount Applications with Use of PA101 Adapter

SS3515 Features

• For the EH3515/EH3515L
• Protects From Direct Sun Rays
• Easy to Install
• Reduces Internal Enclosure Temperature