Connectors
- was $341.14 Special Price $324.80SKU: PA-IP
Viking PA-IP SIP / Multicast Paging Adapter with Amplifier
- PoE powered (class 3, <13 Watts)
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
was $341.14 Special Price $324.80Low Price Guarantee - $99.99SKU: 54VDC4700
TRENDnet 54VDC4700 54V 253W Power Adapter
- 54V DC power adapter
- 253W power output
- Designed for compatible TRENDnet networking devices
- Provides reliable power for supported equipment
$99.99Low Price Guarantee - $40.00SKU: 99-919100101
Kramer 99-919100101 BNC Male to Female Adapter 10 Pieces
- BNC male (plug) to BNC female (jack) barrel adapter; 10-piece pack; 75-ohm characteristic impedance for video signal applications; RF-quality contacts
- BNC barrel adapters enable extension of BNC cable runs by joining two BNC male-terminated cables end-to-end, or provide a gender-conversion interface where a male connector is needed at a female port (or vice versa)
- 75-ohm impedance maintained through the adapter for minimal signal reflection in video, SDI, analog CCTV, and RF signal path applications — impedance mismatch at BNC connectors can cause signal reflections that degrade image quality
- 10-piece pack for installers and integration projects requiring multiple BNC adapter points simultaneously
$40.00Low Price Guarantee - $3.20SKU: 99-9204500
Kramer 99-9204500 K-LAN Crimp Style RJ-45 Connectors for Category Cables
- K-LAN crimp-style RJ-45 (8P8C) modular connectors; for terminating UTP Cat5e/Cat6 solid or stranded bulk category cable; gold-plated contacts for reliable, low-resistance terminations
- Field-terminatable with a standard RJ-45 crimp tool - no punch-down block required; correct for creating custom-length patch cords from bulk Cat6 reel (99-0440300) or terminating in-wall runs at keystone-less positions
- Gold-plated contacts ensure reliable electrical contact and resistance to oxidation over the connector's lifetime - important for signal-sensitive applications like HDBaseT extenders where poor contact resistance can reduce maximum operating distance
- Compatible with standard Cat6 and Cat5e UTP cable constructions; for Cat7a shielded cable termination, a different shielded connector type is required
$3.20Low Price Guarantee - $39.20SKU: 99-9191027
Kramer 99-9191027 DisplayPort (M) to HDMI (F) Adapter
- Resolution support - Up to 1920x1200@60HzSecure Connection - With molded latching DisplayPort connector
- HDCP Compliant
- EDID Pass–Through
- Plug–and–Play - No software required
$39.20Low Price Guarantee - $9.60SKU: 99-9090510
Kramer 99-9090510 Power Adapter European Version
- European standard (CEE 7/4 Schuko Type F / Type E compatible) power adapter for compatible Kramer products; provides the correct European plug for CE-market Kramer equipment deployments
- The European version typically provides a Schuko (Type F) or Type C plug suitable for use across most of continental Europe; correct for Kramer product deployments in Germany, France, Austria, Netherlands, Spain, and most EU countries
- Genuine Kramer OEM power adapter; confirm compatibility with the specific Kramer product model before ordering - power adapters are matched to the product's voltage and current requirements
$9.60Low Price Guarantee - $47.20SKU: 99-9191035
Kramer 99-9191035 Mini DisplayPort (M) to HDMI (F) UHD Adapter
- Mini DisplayPort (male) to HDMI (female) passive adapter; UHD 4K support; compact plug-in adapter for devices with Mini DisplayPort or Thunderbolt 1/2 outputs
- Passive adapter: requires a DP++ (Dual-Mode DisplayPort) source; most MacBooks, Surface Pro, and Thunderbolt 1/2 equipped laptops support DP++; verify source device compatibility before using a passive adapter
- Compact form factor minimizes desk clutter at presentation and collaboration connection points where laptop-to-HDMI connection is needed without a dedicated cable
$47.20Low Price Guarantee - $22.40SKU: 99-9191034
Kramer 99-9191034 HDMI Type-D (M) to HDMI Type-A (F) Adapter
- HDMI Type-D (micro HDMI, male) to HDMI Type-A (standard full-size HDMI, female) adapter; compact plug-in adapter for devices with micro HDMI outputs
- Allows cameras (DSLRs, action cameras, camcorders), tablets, and compact computers with micro HDMI output to connect to standard HDMI displays, capture cards, and extenders using any standard HDMI cable - no dedicated micro-HDMI cable required
- Full HDMI signal support including audio, video, CEC, and HDCP; compact form factor attaches directly to the micro HDMI port
$22.40Low Price Guarantee - $48.80SKU: 99-9191036
Kramer 99-9191036 DisplayPort (M) to HDMI (F) UHD Adapter
- DisplayPort (male) to HDMI (female) passive adapter; UHD (4K) resolution support up to 3840×2160@30Hz over HDMI 1.4; compact adapter directly on the DisplayPort output port
- Passive adapter: works for DisplayPort sources that support DP++ (Dual-Mode DisplayPort), which outputs an HDMI-compatible signal on the same connector - most modern laptops and graphics cards support DP++; check source device specification before using a passive DP-to-HDMI adapter
- Compact form factor plugs directly into the DisplayPort output, minimizing cable clutter and eliminating the need for a separate DP-to-HDMI cable for occasional HDMI display connections
$48.80Low Price Guarantee
Cable Connectors Frequently Asked Questions
What are cable connectors used for in surveillance systems?
Cable connectors are essential components that facilitate the connection between various devices in a surveillance system. They ensure that audio and video signals are transmitted effectively from cameras to recording devices or monitors, maintaining signal integrity and quality.
How do I choose the right connector for my security camera?
To select the appropriate connector, consider the type of cable and the specific requirements of your security camera system. Common types include BNC connectors for coaxial cables and RJ45 connectors for Ethernet cables. Ensure compatibility with both your camera and the recording equipment.
Can I use old connectors with new surveillance equipment?
While some older connectors may work with new equipment, compatibility is not guaranteed. It’s crucial to check the specifications of both the old and new devices to ensure seamless integration. Using mismatched connectors can lead to poor signal quality or malfunction.
What is the difference between shielded and unshielded connectors?
Shielded connectors have additional insulation to protect against electromagnetic interference, making them suitable for environments with high electrical noise. Unshielded connectors are simpler and more cost-effective but may be prone to signal degradation in such conditions.
Do I need special tools to install cable connectors?
Installing cable connectors typically requires specific tools, such as crimping tools for RJ45 connectors or compression tools for BNC connectors. Proper installation is essential for optimal performance, as poorly attached connectors can lead to signal loss or connectivity issues.
Filter
Shopping Options
