Bogen MG Electronics Polycom Audio Kit
Filter
- $25,714.28SKU: 4MN-SYSTEM
Bogen 4MN-SYSTEM Quad Driver Speaker Module with Yoke Bracket and Pole Stand Adaptor in Pelican Case with DSP, AMP
- Quad driver speaker module with yoke bracket and pole stand adaptor in Pelican case with DSP, Amp
- Batteries in a separate Pelican case, Battery charger included
- 4MN module use four MAD-1 drivers arrayed into a 2x2 configuration with each driver coupled to a waveguide
- Standard rigging hardware is built into the module allowing line arrays
- Optional mounting brackets to be installed on a wall or ceiling, a tripod stand, or on a magnetic vehicle mount
$25,714.28Low Price Guarantee - $25,570.00SKU: 2MN-Turbo-Ext-SYS
Bogen 2MN-Turbo-Ext-SYS 2MN Module, Yoke-TB, MP3 Player, Headphone, 25' Cable, Turbo Power Pack in Pelican Case
- 2MN module use two vertically arrayed MAD-1 drivers
- All MN unpowered speakers are controlled and powered using the portable TURBO Power Pack
- Power Pack provides remote power and signal control for any MN system
- Lithium Polymer batteries, and a battery status indicator
- MN speakers is available in 25' length
$25,570.00Low Price Guarantee - $24,664.22SKU: 1MN-360-P
Bogen 1MN-360-P (4) 1MN Drivers on 360 Degree Metal Frame
- (4) 1MN drivers on 360 degree metal frame.Requires Clear Voice Rack-Mounted PS/U and DSP Modules -
$24,664.22Low Price Guarantee - $22,190.13SKU: 2-Turbo-SYS
Bogen 2-Turbo-SYS Self Powered 2MN Speaker with Internal Rechargeable Battery, DSP and Amp
- 2MN speaker with internal rechargeable battery, DSP and Amp
- Includes Yoke stand, MP3 player, microphone headset, Aux input cable, and unit charger
- 2MN module use two vertically arrayed MAD-1 drivers
- Standard rigging hardware is built into the module allowing line arrays
- 2MN-Turbo speakers are self-contained systems with amplifiers, control, Turbo DSP, and Lithium Polymer batteries
$22,190.13Low Price Guarantee - $15,504.30SKU: IDA8C-RU
Bogen IDA8C-RU Networkable Voice Alarm PAVA System, Controller Unit, RU
- Public address and emergency sound system control unit
- Fully digital with 8 audio inputs and 8 audio outputs
- 4 dedicated and monitored PDC-ports for firemen's microphones
- 2 dedicated audio in and outputs for back-up amplifiers
- Enhanced loudspeaker line surveillance for AB-zoned installation
$15,504.30Low Price Guarantee - was $24,997.15 Special Price $15,402.00was $24,997.15 Special Price $15,402.00Low Price Guarantee
- $13,928.57SKU: 4-1MN-SP360
Bogen 4-1MN-SP360 4 x 1MN-SP Drivers on 360-Degree Metal Frame
- 4 x 1MN-SP drivers on 360-degree metal frame
- Requires clear voice power and DSP module
- 1MN and 1MN-P have one MAD-1 driver coupled to a wave guide with 20°V x 30°H coverage at 2 Khz.
- Various mounting brackets allow installation in corners, on walls or ceilings, on tripod stand, on a magnetic vehicle mount, or in a line array
$13,928.57Low Price Guarantee - $9,684.04SKU: IDA8C-SW
Bogen IDA8C-SW Switching Networkable Voice and PAVA System
- Enhanced loudspeaker line surveillance for A/B zone wiring
- The IDA8C-SW supports redundant network cabling, wired as a redundant loop
- Up to 48 simultaneous audio channels per local network
- Up to 256 zones in a local network, and up to 8,192 zones in a global network
- 4 channel audio distribution for EVAC, Paging, BGM & Backup
$9,684.04Low Price Guarantee - $9,320.45$9,320.45Low Price Guarantee
Audio Kit Frequently Asked Questions
What is an audio kit in surveillance systems?
An audio kit in surveillance systems is a combination of devices designed for monitoring and communication purposes, typically including microphones and speakers. These kits enable two-way audio communication, allowing users to listen and speak through the system, enhancing the security and monitoring capabilities of a property.
How does a wireless audio transmitter and receiver work?
A wireless audio transmitter and receiver work by capturing sound through a microphone, converting it into an audio signal, and transmitting it wirelessly to a receiver. The receiver then converts the signal back into sound, allowing for real-time audio monitoring without the need for physical connections between devices.
Can I integrate an audio kit with my existing security system?
Yes, many audio kits can be integrated with existing security systems, provided they are compatible. This integration allows homeowners to enhance their surveillance capabilities by adding audio monitoring and communication features, making the overall security system more effective.
What features should I look for in an audio monitoring kit?
When selecting an audio monitoring kit, consider features such as omnidirectional microphones, adjustable volume controls, two-way communication, and compatibility with smartphones or tablets. Additional features like motion detection and night vision can also enhance the functionality of the kit.
Are audio kits suitable for outdoor use?
Some audio kits are designed for outdoor use and are built to withstand various weather conditions. Look for kits that specify weather-resistant or vandal-resistant features to ensure they perform effectively in outdoor environments while maintaining audio quality and durability.
Filter
Now Shopping by
Shopping Options 