Access Control Power products
- was $847.00 Special Price $839.00SKU: EFLOW104NKA8QM
Altronix EFLOW104NKA8QM Networkable Dual Output Power Supply/Charger, 8 Fuse Protected Auxiliary Class 2 Power-limited Outputs, BC400 Enclosure
- Unit provides 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power)
- Additional aux. Class 2 power-limited output rated @ 1A
- Short circuit and overvoltage protection
- Fire alarm disconnect
- Bi-colored LEDs provide visual verification of voltage on each output
was $847.00 Special Price $839.00Low Price Guarantee - was $752.00 Special Price $745.00SKU: T1PHK1F4S
Altronix T1PHK1F4S 4-Door Access and Power Integration Kit - Trove1C1 with eFlow4NB, ACM4, VR6, PDS8. Trove1 Series
- 12VDC or 24VDC power supply/charger
- Accommodates up to one (1) Openpath OP-ACC, OP16EM, and one (1) OP-EX-4E or OP-X-8E modules
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Supervision - AC Fail
- Enclosure accommodates up to two (2) 12VDC/7AH batteries
was $752.00 Special Price $745.00Low Price Guarantee - was $770.00 Special Price $763.00SKU: MAXFIT7F8APS
Altronix MAXFIT7F8APS Access Power Controller Kit - BC750 enclosure with eFlow104NB, ACM8, PDS8, VR6
- Low Battery and Battery Presence
- Low power shutdown
- Eight (8) distributed 12VDC or 24VDC fuse protected outputs
- Eight (8) independently controlled 24VDC fuse protected relay outputs
- Convenient knockout configuration
was $770.00 Special Price $763.00Low Price Guarantee - was $2,061.00 Special Price $2,043.00SKU: T3SSK75F28D
Altronix T3SSK75F28D 28-Door Access and Power Integration Kit - Trove3SS3 with eFlow104NB, eFlow102NB, (3) ACM8CB, ACM4CB, (2) PD16WCB, RSB2
- 24VDC and 12VDC power supply/chargers
- Accommodates S2-INST Installation Kit
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Supervision - AC Fail
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
was $2,061.00 Special Price $2,043.00Low Price Guarantee - $65.94SKU: RBC35
APC RBC35 Replacement Battery Cartridge 35 with 2 Year Warranty
- 12V 3.0AH replaceable battery for APC Back-UPS
- Brand new battery shipped from strictly managed warehouse
- Peace of mind with 2-year warranty and UPS safety certifications
- Lead-acid battery
$65.94Low Price Guarantee - $1,265.00SKU: PDM2330L6-23-980
APC PDM2330L6-23-980 IT Power Distribution Module 2 Pole 3 Wire 30A L2-L3 L6-30 980CM
- Power distribution module with one 2-pole breaker
- 30A breaker
- 980cm output cable
$1,265.00Low Price Guarantee - $7,185.00SKU: APDU11452MO
APC APDU11452MO NetShelter Rack PDU Advanced Generation 2, Metered Outlet, 3Phase, 17.3kW
- Ideal for AI and other high density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Live Swap Network Management Card 3
- Enhanced cybersecurity and EcoStruxureTM IT compatible
- 1 year free subscription to Secure NMC3 System
$7,185.00Low Price Guarantee - $4,065.00SKU: APDU11151SW
APC APDU11151SW NetShelter Rack PDU Advanced Generation 2, Switched, 5.0kW
- Ideal for high-density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- 1 year free subscription to Secure NMC3 System
- Next-gen PDU speeds up IT deployments, one PDU for every type of device
- Enhanced cybersecurity and EcoStruxure™ IT compatible
$4,065.00Low Price Guarantee - $2,075.00SKU: AP8932US
APC AP8932US NetShelter Switched Rack PDU, 0U, 2.9kW
- Ideal for Colocation, large data centers or distributed IT sites
- Plan capacity and balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh)
- Power sequencing delays determine the order in which power is turned on or off
- Zero U toolless installation
- Remote management of rack PDUs for efficient time-saving
$2,075.00Low Price Guarantee
Access Control Power Products Frequently Asked Questions
What are access control power products?
Access control power products are devices that provide the necessary power and management for access control systems. These products include power supplies, controllers, and battery backups designed to ensure that access control systems operate reliably and efficiently.
How do I choose the right power supply for my access control system?
To choose the right power supply, consider the voltage and current requirements of your access control devices. Ensure the power supply can handle the total load and has features like short circuit protection and battery backup capabilities for reliability during power outages.
What is the importance of battery backup in access control systems?
Battery backup is crucial for maintaining access control functionality during power outages. It ensures that doors remain secure and accessible when the main power is lost, preventing unauthorized access and maintaining safety and security for your property.
Can I use multiple battery packs in my access control system?
Yes, many access control systems support multiple battery packs for extended power supply and redundancy. This setup can provide additional runtime during outages and ensure that your system remains operational even if one battery fails.
What features should I look for in an access power controller?
When selecting an access power controller, look for features such as multiple output options, built-in battery chargers, and protection against short circuits and thermal overloads. Additionally, ensure it supports the voltage and current requirements of your access control devices for optimal performance.
Filter
Shopping Options
