Nitek Axis Bosch Keri Systems InVid Ikegami American Dynamics NVT UTP Transmission & Baluns
Send analog or HD video over long UTP runs with our UTP transmission & baluns lineup. Pair cameras and DVRs using audio & video UTP baluns for clean, interference-resistant signals, or carry everything on a single cable with power, video & data (PVD) UTP solutions. Cut coax, simplify wiring, and keep installs tidy without sacrificing picture quality.
Featured UTP & Balun Manufacturers
Filter
- $7,001.95SKU: NV-3272
NVT NV-3272 32-Channel Digital EQ Hub
- Compact rack-mountable 19″ 1U high enclosure features 32 channels with 1 output per channel
- Full motion CCTV at distances up to 1 mile (1,6km) with any NVT passive transmitter
- Full motion CCTV at distances up to 3,000ft (1km) with any NVT passive transceiver
- Includes Built-in transient protection and ground-lifting
- Fully automatic 4-band equalization provides adjustment-free equalization every time
$7,001.95Low Price Guarantee - $4,271.39SKU: NV-32PS42-PVD
NVT NV-32PS42-PVD 32 Channel Power Supply StubEQ Receiver Hub
- Provides Class 2 SELV 28 VAC with up to 0.5 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
- Features 32-Channels with one video output per channel
- Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
- Adaptive StubEQ fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
- Automatic-reset fault protection; transient protection
$4,271.39Low Price Guarantee - $2,383.74SKU: NV-1672
NVT NV-1672 16 Channel Digital EQ Active Receiver Distribution Amplifier Hub
- Provides adjustment-free equalization every time
- Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub, 1 mile (1,6km) when used with the NV-653T active transmitter
- Includes RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors
- Up to 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver
- Automatic compensation for reverse-polarity wiring
$2,383.74Low Price Guarantee - $1,873.54SKU: NV-16PS42-PVD
NVT NV-16PS42-PVD 16 Channel Power Supply StubEQ Receiver Hub
- Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
- Built-in distribution amplifier with 2 video outputs per channel
- Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
- Adaptive StubEQTM fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
- Automatic-reset fault protection; transient protection
$1,873.54Low Price Guarantee - $1,783.70SKU: NV-3213
NVT NV-3213 32 Channel Passive Hub
- High-Density 19" 1U high enclosure features 32 ports
- Full motion CCTV at distances up to 750ft (225m) with any NVT passive transceiver
- Full motion CCTV at distances up to 3,000ft (1km) with any NVT active transceiver
- Includes Built-in transient protection
- Includes RJ45 video connectivity
$1,783.70Low Price Guarantee - $1,548.74SKU: NV-1642
NVT NV-1642 16 Channel StubEQ Active Receiver Hub withPower Supply
- Adaptive StubEQTM fully automatic 2-band equalization provides adjustment-free equalization every time
- Compact rack-mountable 19″ 1U high enclosure features 16 channels
- Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver or hub, 2,000ft (600m) when used with the NV-653T active transmitter
- RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
- Exceptional interference rejection
$1,548.74Low Price Guarantee - $1,356.00SKU: NV-16PS13-PVD
NVT NV-16PS13-PVD Power Supply Passive Video Receiver Hub
- Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
- Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
- Automatic-reset fault protection; transient protection
- Individually floating outputs ensure total ground-loop immunity
- Diagnostic LEDs show load/no load, miswires, and overload conditions
$1,356.00Low Price Guarantee - $1,157.12SKU: NV-EC1701U-K4H
NVT NV-EC1701U-K4H 4-Camera Eo2 Transmission System
- 56 VDC is distributed over the coax to all connected equipment
- Easy configuration, no PC required
- Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast, etc.)
- 128-bit AES encrypted transmission
- Built-in transient protection; Industrial temperature range
$1,157.12Low Price Guarantee - $1,134.52SKU: NV-EC1701U-KIT4
NVT NV-EC1701U-KIT4 Quadruple Entry Station Eo2 Transmission System
- 100 BaseT transmission; Network speeds up to 93 Mbps; Up to 1,000ft (305m)
- One NV-EC1701U transceiver at the network-end can support multiple remote transceivers/IP cameras
- 56 VDC is distributed over the coax to all connected equipment
- Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts
- Easy configuration, no PC required
$1,134.52Low Price Guarantee
UTP Transmission Baluns Frequently Asked Questions
What is a UTP transmission balun?
A UTP transmission balun is a device that allows video signals to be transmitted over unshielded twisted pair (UTP) cables, such as CAT5e or CAT6. It converts the video signal from a coaxial format to a differential signal suitable for UTP transmission, enabling longer distances without signal degradation.
How far can I transmit video using a balun?
The distance for transmitting video using a balun can vary based on the specific model and type of cable used. Many baluns can transmit video signals up to 1.5 miles (2.4 km) using CAT5e cables, while others may support shorter distances. Always check the specifications for the particular balun you are using.
Do I need special cables for baluns?
While baluns can work with standard UTP cables, using low-cost CAT5e or CAT6 cables is recommended for optimal performance. These cables are designed to handle video signals effectively, reducing interference and ensuring high-quality transmission over long distances.
Can I use baluns for both video and power transmission?
Yes, some baluns are designed to transmit both video and power over the same UTP cable. These models typically feature built-in power connectors, allowing you to power your cameras while simultaneously transmitting video signals, simplifying installation and reducing cable clutter.
What are the advantages of using UTP transmission baluns?
UTP transmission baluns offer several advantages, including cost-effectiveness, ease of installation, and reduced interference. They allow homeowners to use existing structured cabling systems, save conduit space, and achieve high-quality video transmission without the need for expensive coaxial cables.
Filter
Now Shopping by
Shopping Options 