Nitek Axis Bosch Keri Systems InVid American Dynamics Seco-Larm UTP Transmission & Baluns
Filter
-
Seco-Larm MVE-AHMPM-41NQ 4K HDMI Extender over IP - Tx and Rx Kit
- Extends HDMI over one Cat5e/6 cable or IP network
- Supports One-to-One, and One-to-Many applications
- Power adapters and IR hardware included
- IR Support (20kHz~60kHz)
- HDCP Compliant
-
Seco-Larm EB-P101-20PHQ 4-In-1 HD Video and Power Balun
- 4-in-1 TVI / CVI / AHD / Analog video up to 5MP
- NTSC / PAL / SECAM compatible
- Transmits video up to 1,476ft (450m) depending on format, resolution, and cable used
- Transmits power for 12/24 VAC/VDC cameras
- Built-in TVS surge protection
-
American Dynamics ADACTP01BNC Cable Accessory, Twisted Pair to BNC Adapter
- No external power required
- 50 dB cross-talk and noise immunity
- Compatible with NTSC or PAL formats
- Compatible with Up-The-Coax (UTC) control signals
- Compatible with any video device with composite video output
-
Seco-Larm EVT-AH16-VT2Q ENFORCER CCTV 1U Rack-Mount 16-Port Active Balun Hub
- Easy installation with removable terminal blocks
- Cable management brackets included
- Power input: Dual voltage - 12/24 VDC/VDC
- 1.5 Amp 12VDC power adapter included
- Perfect for use with DVRs
-
Nitek EL1500U IP Video Network Extender
- Environmentally hardened – meets NEMA TS-1/TS-2
- Transmits up to distances of 600 meters (1960 feet)
- Supports mega-pixel technology
- Fully transparent to the network
- Supports any network device, including IP cameras
-
InVid IA-16BALUNHUB 16 Position BNC to RJ45 Female with Power Pigtails
- 16 position BNC to RJ45 female with power pigtails
-
Seco-Larm MVE-AH1E4-42NQ 4K HDMI 1x4 Splitter/Extender over Cat6
- 4K HDMI 1x4 Splitter/Extender over Cat6
- 4K HDMI Splitter/Extender 1 x 4 over Cat5e/6
- Extends range up to 230ft (70m) over Cat6. Connect HDMI equipment using low-cost Cat5e/6 UTP cables
- Supports 4K@30Hz resolution. Special features include Local Loop-Out and IR. Includes one 12VDC power supply , four IR receiver, and one IR transmitter
-
Seco-Larm MVE-AH1E1-42NQ 4K HDMI Extender over Single Cat5e/6
- Extends HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 4K with zero signal loss
- Plug and play operation
- Active operation ensures signal strength
- IR for remote control extension
-
Seco-Larm MVD-V1201-1Q VGA Over Cat5e/6 With Audio 1-In 2-Out Up to 984ft (300m)
- Extends the range of VGA and stereo signals over 984ft (300m) over one Cat5e/6 cable
- Gain and peak adjustments to account for different UTP cable lengths. Use gain for brightness adjustment and peak for skew adjustment
- Supports up to 1920x1200 resolution
- Works with monitors, projectors, HDTV and flat panel screens
- Each set includes one transmitter and one receiver and is plug-and-play ready