Nitek Axis Sony Pelco Transmission
Filter
-
Axis 0418-021 P7224 Video Encoder Blade 10 PK
- Full frame rate in all resolutions
- Simultaneous H.264 and Motion JPEG
- High resolution quad-view
- Two-way audio
- PTZ support
-
Pelco FRV40D2S1FC 4 Channel Single Mode Fiber Receiver, FC
- 1 bi-directional contact closure
- Single-Mode support for distances up to 42.9mi (69km)
- Laser diode for transmission of optical signals
- Compatible NTSC, PAL, and SECAM video standards
- Voltage-transient protection on all power and signal input/output lines
-
Pelco NET6516-UK Rack Mount Encoder16 Channel, UK Power Cord
- Easy Installation
- Compatible With Pelco Cameras, Including Coaxitron And Pelco D
- Customizable Deployment
- Onvif S Compliant
- H.264 And H.265 High, Main, And Base Compression
-
Pelco FMCI-PG1 Single Channel IP Media Converter, Standard Size
- Supports Autonegotiation and Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation for Full-Duplex or Half-Duplex Operation
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
-
Pelco FRV320S1FC 32 Channel Single Mode Fiber Receiver, FC
- Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
- Compatible with NTSC, PAL, or SECAM Video Standards
- Laser Diode for Transmission of Optical Signals
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
-
Pelco FRV320S1ST 32 Channel Single Mode Fiber Receiver, ST
- Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
- Compatible with NTSC, PAL, or SECAM Video Standards
- Laser Diode for Transmission of Optical Signals
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
-
Pelco FRV160S1FC 16 Channel Single Mode Fiber Receiver, FC
- Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
- Compatible with NTSC, PAL, or SECAM Video Standards
- Laser Diode for Transmission of Optical Signals
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
-
Pelco POE130-XT Single Port PoE Gigabit Extender
- Extend PoE Installation Range by Additional 100 Meters
- Supports 10/100/100 Mbps Data Rates
- Provides 802.3af Power Levels When Powered by Any 802.3at Source
- Provides 802.3at Power Levels When Powered by PD-9601G/AC Midspans
- Cost Effective Installation: No Need For Local Power
-
Pelco FMCI-PG1POE Single Channel 1000 Mbps Media Converter, Power Over Ethernet
- IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
