Nitek AG Neovo Ganz Seco-Larm SecurityTronix Ditek Comnet Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Comnet CNFE1002M1A 10/100 Mbps Standard Mount DC-Only Media Converter
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
-
Seco-Larm SK-919TP1H-BQ 1 Button, 1 Channel Handheld Slimline RF Transmitter
- Extreme Durability
- Magic LED only appears when buttons are pressed
- Frequency 315MHz (433.92MHz available by special order)
- Compatible with all 315MHz SECO-LARM receivers
- Over 68 billion (6.8x1010) possible codes
-
Comnet CNFE1005POES/M 10/100 Mbps Ethernet 2 Port Media Converter with PoE+
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- The Ethernet electrical interface auto-negotiates to either 10 or 100 Mbps without the need for any user selection
- The optical interface operates at 100 Mbps (100-FX)
- Power Sourcing Equipment (PSE): Provides 30 watts in two modes at 48 VDC, for high output demand applications of remote Ethernet equipment
- ST optical connector
-
Comnet SFP-46 1000FX 1310nm, 2km, 2 Fiber, LC, MSA Compliant
- Interchangeable SFP for fiber type, distance and connector
- IEEE 802.3 compliant
- Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)
- Operating temperature: -40Ëš C to +75Ëš C
- Storage temperature: -40Ëš C to +85Ëš C
-
Seco-Larm VC-3YAQ 4-in-1 HD to HDMI Converter
- Wall mountable with included screws
- Picture-in-picture mode when dual HD Analog video input used
- HDMI/VGA output support: 480p, 576p, 720p, 1080i, 1080p
- CVBS output support: NTSC, PAL
- CVBS under scan adjustment
-
Seco-Larm MVA-TH01Q Composite-to-HDMI Converter with Scaler
- Converts composite video and stereo audio to 720p or 1080p HDMI
- Supports NTSC, PAL, and SECAM video inputs
- Supports up to 1080p on HDMI output
- Stereo audio input
- Selectable between 720p and 1080p upscaling
-
Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6
- Extend HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
- HDMI Loop output for local HDMI display
- Plug and play operation – comes as a complete set
-
Comnet CLLFE16POEU Local 16 Channel Ethernet-over-UTP Extender With 30W PSE PoE+
- Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP
- Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
-
Comnet CLLFE4POEC Local 4 Channel Ethernet-over-COAX Extender With 30W PSE PoE+
- Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over Coaxial cable
- Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
