Nitek AG Neovo AVE TRENDnet Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Nitek EL1500U IP Video Network Extender
- Environmentally hardened – meets NEMA TS-1/TS-2
- Transmits up to distances of 600 meters (1960 feet)
- Supports mega-pixel technology
- Fully transparent to the network
- Supports any network device, including IP cameras
-
TRENDnet TI-F11SFP Hardened Industrial 100/1000Base-T to SFP Media Converter
- Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter
- SFP port accommodates Multi or Single Mode fiber
- Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module
- Includes DIN-rail and wall mounts
- Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
-
TRENDnet TFC-1000S40D5 Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
- Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
-
TRENDnet TI-W100 Industrial AC1200 Wireless Gigabit Router
- Industrial AC1200 Dual-Band Wireless
- 4 x Gigabit ports, 1 x Gigabit WAN port
- Hardened IP30 rated metal housing
- Operating temperature range of -30° – 70° C (-22° – 158° F)
- Up to 8 SSIDs per band
-
TRENDnet TEW-840APBO2K-CA 14 dBi WiFi AC867 Outdoor PoE Preconfigured Point-to-Point Bridge Kit
- 5GHz WiFi AC867 point-to-point bridge kit
- Includes two preconfigured TEW-840APBO access points
- 14 dBi directional antennas
- Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
- Proprietary PoE power adapters included
-
TRENDnet TEW-840APBO2K 14 dBi WiFi AC867 Outdoor PoE Preconfigured Point-to-Point Bridge Kit
- 5GHz WiFi AC867 point-to-point bridge kit
- Includes two preconfigured TEW-840APBO access points
- 14 dBi directional antennas
- Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
- Proprietary PoE power adapters included
-
TRENDnet TEW-829DRU AC3000 Wireless Gigabit Multi-WAN VPN SMB Router
- Dual-WAN ports support load-balancing and fail-over modes
- 8 x Gigabit LAN ports, 1 x Console port
- SSL, IPsec, PPTP, and L2TP w/IPsec VPN support
- IEEE 802.1Q inter-VLAN routing
- Three concurrent Wi-Fi bands maximize device networking speeds
-
TRENDnet TEW-740APBO2K 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit
- Wireless N300 point-to-point networking (2.4 GHz)
- 2 x preconfigured Wireless N access points
- IPX6 outdoor weather rated housing
- Built-in 10 dBi directional antenna
-
TRENDnet TEW-826DAP AC2200 Tri-Band PoE+ Indoor Wireless Access Point
- High performance AC2200 PoE+ WiFi access point
- Wireless AC wave 2 MU-MIMO technology boosts performance in a busy environment
- Three concurrent WiFi bands maximize device networking speeds
- AC2200 Tri-Band: 867Mbps (5GHz1) + 867Mbps (5GHz2) + 400Mbps (2.4GHz) bands
- Access Point, Client Bridge, WDS AP, WDS Bridge, WDS Station, and Repeater modes
