Nitek AG Neovo Altronix Geovision Keri Systems Panasonic Nuuo Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Geovision 89-IPDBXUL-K010 GV-IPDECODERBOX Ultra Black V1.00
- Decode video streams in H. 264 / H.265 codec up to 30 fps
- Decode up to 8 megapixel IP cameras
- Decode up to 64 IP streams
- Automatically search for ONVIF IP devices
- Support for third‐party IP cameras that adhere to RTSP or ONVIF
-
Altronix NETWAYSP8PL 8 Port PoE+ Switch
- Two (2) Gigabit SFP ports
- Two (2) 10/100/1000 Mbps ports
- Six (6) 10/100 Mbps ports
- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant, or Hi-PoE (60W)
- PoE activity LED indicators
-
Altronix NETWAYSP1A Media Converter/Repeater
- PoE IEEE 802.3AF compliant, Power: 2W
- One (1) 1Gb SFP port
- Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included)
- IEEE 802.3af (15W) compliant
- Wire type: 4-pair CAT5e and higher
-
Panasonic VP-8-V2 8 Channel Encoder
- Connectable to HD-TVI and analog cameras
- Connectable to the coax camera/dome with long transmission distance
- Manual video quality diagnostics
- VCA detection alarm (line crossing detection and intrusion detection)
- 1 self-adaptive 10M/100M/1000M network interface
-
Altronix NETWAYSP4WP Dual 1G Fiber SFP, Hardened 120W Power Supply
- Two (2) Gigabit SFP ports
- Four (4) 10/100/1000 Mbps ports
- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant, or Hi-PoE (60W)
- 120W total power
- PoE activity LED indicators
-
Altronix HubWayH16 16 Channel Passive UTP Transceiver Hub
- Sixteen (16) channels of video over twisted pair up to a distance of 750 ft. per channel
- Sixteen (16) 75 ohm video outputs
- RS422/RS485 data inputs
- Sixteen (16) individual AC or DC power inputs
- Each channel is selectable for the following modes
-
Altronix eBridge1ST EoC Single Port Small Transceiver, 25Mbps, Requires Compatible Receiver
- Retrofit digital IP cameras in an analog CCTV installation
- Works with IP Megapixel and non-Megapixel cameras
- Extend Network link distance in an industrial environment over 610m
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
-
Altronix P1MM Small Form-Factor Pluggable (SFP) Multi-Mode Transceiver
- IEEE 802.3a compliant
- Spans distances up to 550m (1804 ft.)
- Class 1 FDA and IEC60825-1 Laser Safety Compliant
- Compliant with MSA SFP Specification
-
Altronix EBRIDGE1600PCRM EoC 16 Port Receiver, 100Mbps Per Port, Requires 1U Compatible Transceiver
- Retrofit digital IP cameras in an analog CCTV installation
- Works with Megapixel, HD720, HD1080 and VGA (SD) cameras
- Extend Network link distance in an industrial environment
- Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc
