Nitek AG Neovo Altronix American Dynamics Pelco Speco Comnet Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Comnet CNFE1002M1A 10/100 Mbps Standard Mount DC-Only Media Converter
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
-
Pelco FMCI-PF1POE Single Channel 100 Mbps Media Converter, Power Over Ethernet
- IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
-
Pelco FRV10D1M1ST 1 Channel Video Bi-Direct RX ST Connector, Multi-Mode
- 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
- Bidirectional Data Channel that Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
- Supports Pelco Coaxitron “Up-the-Coax” Control Signals for a Distance up to 48 km (30 mi)
- Multimode Fiber Support for Distances up to 3 km (2 mi)
- Exceeds All Requirements for RS-250C Short-Haul Transmission
-
Altronix EBRIDGE1PCR EoC Single Port Receiver, 25Mbps, 24VDC or 24VAC, Requires Compatible Transceiver
- Retrofit digital IP cameras in an analog CCTV installation
- Works with Megapixel, HD720, HD1080 and VGA (SD) cameras
- Extend Network link distance in an industrial environment
- Upgrade deployed CCTV coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc.
- Enables simultaneous transmission of composite and digital IP video
-
Pelco VX-A3-DEC VideoXpert Enhanced Decoder and Mount with US, Europe, and United Kingdom Power Cords
DEAL OF THE DAY: Use code QUICK5 and save $5VideoXpert Enhanced Decoder and Mount with US, Europe, and United Kingdom Power Cords
-
Altronix NETWAYSP8PL 8 Port PoE+ Switch
- Two (2) Gigabit SFP ports
- Two (2) 10/100/1000 Mbps ports
- Six (6) 10/100 Mbps ports
- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant, or Hi-PoE (60W)
- PoE activity LED indicators
-
Pelco FMCI-PG1POE Single Channel 1000 Mbps Media Converter, Power Over Ethernet
- IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
-
Pelco EC-3001CLPOE-M Ethernet Connect Local 1 Port Coaxial Extender
- Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
- Extended Temperature Operation from –40° to 75°C (–40° to 167°F)
- Extended Pass-Through PoE Meets the IEEE802.3at Standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
- Supports Multicast, Unicast, and Jumbo Frame
-
Comnet FVT10C1M1/M 1 Channel Digitally Encoded Mini Video Transmitter and Contact Closure, MM
- 10-bit Digital Video, Contact Closure Transmission: Receives one, two, or four real-time color video signals over one, two, or four optical fibers
- Supports one, two or four Contact Closures in the direction of video, ideal for tamper switch, etc.
- Exceptionally low video distortion with zero performance variation vs. optical path
- Distances up to 4 km (2.5 mi) over Multimode Fiber
- Distances up to 54 km (33.6 mi) over Single Mode Fiber
