Nitek AG Neovo Alpha American Dynamics Pelco SecurityTronix Tripp Lite Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Pelco FMCI-PF1POE Single Channel 100 Mbps Media Converter, Power Over Ethernet
- IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
-
Pelco FRV10D1M1ST 1 Channel Video Bi-Direct RX ST Connector, Multi-Mode
- 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
- Bidirectional Data Channel that Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
- Supports Pelco Coaxitron “Up-the-Coax” Control Signals for a Distance up to 48 km (30 mi)
- Multimode Fiber Support for Distances up to 3 km (2 mi)
- Exceeds All Requirements for RS-250C Short-Haul Transmission
-
Alpha WPT503 Wireless Pendant Transmitter with Neck Lanyard
- Fully supervised wireless 900MHz transmitter
- Water-Resistant (to IP67 standard)
- Large alarm button
- Low battery warning before battery depletion
- Vibration and blinking red LED for call assurance
-
Pelco VX-A3-DEC VideoXpert Enhanced Decoder and Mount with US, Europe, and United Kingdom Power Cords
DEAL OF THE DAY: Use code QUICK5 and save $5VideoXpert Enhanced Decoder and Mount with US, Europe, and United Kingdom Power Cords
-
Pelco FMCI-PG1POE Single Channel 1000 Mbps Media Converter, Power Over Ethernet
- IEEE802.3at Class 1–4 Power over Ethernet (PoE) 30 W at 48 VDC
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2, and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Compliant with IEEE 802.3 Standards
-
Pelco EC-3001CLPOE-M Ethernet Connect Local 1 Port Coaxial Extender
- Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
- Extended Temperature Operation from –40° to 75°C (–40° to 167°F)
- Extended Pass-Through PoE Meets the IEEE802.3at Standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
- Supports Multicast, Unicast, and Jumbo Frame
-
Pelco EC-3016CLPOE-R EthernetConnect Local 16 Port Extender
- Transmits Individual Ethernet Data Channels with Power over Ethernet Plus (PoE+) Power Injection and Pass-Through PoE+ over Standard Cat5/Cat5e/Cat6 UTP Cable or Coaxial Cable
- Extends Ethernet up to 914 m(3,000 ft) at 10 Mbps or 610 m (2,000 ft) at 100 Mbps over Cat5/Cat5e/Cat6 UTP Cable
- Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
- Extended Temperature Operation from –40° to 75°C (–40° to 167°F)
- Extended Pass-Through PoE Meets the IEEE802.3at Standard for Power over Ethernet
-
Pelco VX-A4-SDD United Kingdom Power Cords and Shared Display Decoder
- Provides scalability and modular expansion
- Supports monitor walls, including cell layouts and cameras
- Provides seamless transition from VideoXpert Professional
- Supports MJPEG, MPEG-4, H.264, and H.265
- Supports environments that use anti-virus and firewall software
-
Pelco NET6516-US Rack Mount Encoder16 Channel, US Power Cord
- Easy Installation
- Compatible With Pelco Cameras, Including Coaxitron And Pelco D
- Customizable Deployment
- Onvif S Compliant
- H.264 And H.265 High, Main, And Base Compression
